From: Stephen Clark <Stephen.Clark@seclark.us>
To: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Alberto Gonzalez <info@gnebu.es>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Laptop's HDD
Date: Sat, 10 Nov 2007 15:25:09 -0500 [thread overview]
Message-ID: <473613A5.6000004@seclark.us> (raw)
In-Reply-To: <Pine.LNX.4.64N.0711091416570.914@blysk.ds.pg.gda.pl>
Maciej W. Rozycki wrote:
>On Sun, 4 Nov 2007, Alberto Gonzalez wrote:
>
>
>
>>The problem comes from a very high rate of load/unload cycles of the heads
>>that reaches the 300.000-600.000 limit in 2-3 years (with smartmontools it
>>can checked it with "smartctl -A /dev/sda") . There are reports of HDD dying
>>even earlier for this problem [2]
>>
>>
>
> I use:
>
># hdparm -B 255 /dev/hda
>
>to get rid of the problem with an ATA disk where I do not care that much
>about power consumption. I do not know what the equivalent for a SATA
>disk would be, but chances are it will be easier to track it down with the
>reference above.
>
> Maciej
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
My laptop harddrive is only a little over a year old and it has a cycle
count of 193 Load_Cycle_Count 0x0012 021 021 000
Old_age Always - 795931
it was going up a few counts everytime I ran the smartctl -A command. It
quit incrementing after
I did the hdparm -B 255 command.
--
"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)
next prev parent reply other threads:[~2007-11-10 20:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-03 23:02 Alberto Gonzalez
2007-11-05 11:10 ` Pádraig Brady
2007-11-09 14:21 ` Maciej W. Rozycki
2007-11-10 3:28 ` Jeff Garzik
2007-11-10 20:25 ` Stephen Clark [this message]
2007-11-12 17:09 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=473613A5.6000004@seclark.us \
--to=stephen.clark@seclark.us \
--cc=info@gnebu.es \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome