From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752710AbZHZS07 (ORCPT ); Wed, 26 Aug 2009 14:26:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752470AbZHZS06 (ORCPT ); Wed, 26 Aug 2009 14:26:58 -0400 Received: from mail-px0-f174.google.com ([209.85.216.174]:64502 "EHLO mail-px0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752439AbZHZS06 convert rfc822-to-8bit (ORCPT ); Wed, 26 Aug 2009 14:26:58 -0400 X-Greylist: delayed 469 seconds by postgrey-1.27 at vger.kernel.org; Wed, 26 Aug 2009 14:26:58 EDT DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=R+o+A6N86Zq5DstVswa03MwQifJDEfOtqri0LaVUy09PcTZP5mdiQ1Li75d+fuDoHH VFzibbq6lgs+GBiHbVvHBy7kQqnILDWMpGlGvnlmVj0iKAzv+gHfkw+p5k4EdqPJdgyu wABai0FMqwWTF7T6nWVGVM0BjIYcp8S7+Va1s= MIME-Version: 1.0 In-Reply-To: <20090826064545.GA7023@kroah.com> References: <4746469c0908251817u225609bax66ea27261a1ef038@mail.gmail.com> <20090826064545.GA7023@kroah.com> Date: Wed, 26 Aug 2009 11:19:11 -0700 Message-ID: <4746469c0908261119m6f3edbd3ya6c7f483d434df16@mail.gmail.com> Subject: Re: expresscard hotplug not working From: Mike Mohr To: Greg KH Cc: linux-kernel@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org acpiphp fails to load (claiming no such device). pciehp is loaded but dmesg doesn't indicate that any hardware is found by the driver -- it only shows a status message stating that the driver is loaded. Thanks, Mike On Tue, Aug 25, 2009 at 11:45 PM, Greg KH wrote: > On Tue, Aug 25, 2009 at 06:17:28PM -0700, Mike Mohr wrote: >> Hi, >> >> I think I'm having a similar problem to the fellow listed here: >> >> http://kerneltrap.org/mailarchive/linux-kernel/2007/10/16/344543 >> >> The only difference is that no card will work at all unless it is >> inserted before system power is turned on.  If the card is removed >> while the system is running it stops working and will never return to >> life unless the system is rebooted with the card in the slot. >> >> My kernel is configured exactly as this page describes: >> >> http://www.gentoo-wiki.info/ExpressCard >> >> However, I do not receive anything in dmesg except the reports of the >> driver being unloaded and/or loaded.  Attempts to insert the card >> after the machine is up elicit no kernel messages.  I'm thinking there >> may be a missing PCI ID somewhere in the pciehp/pci_hotplug driver(s), >> but I could well be mistaken. > > Do you have the acpiphp or pciehp driver loaded before trying to insert > your card? > > thanks, > > greg k-h >