On 03/10/2017 12:13 PM, Russell King - ARM Linux wrote: > Version 5 gives me no v4l2 controls exposed through the video device > interface. > > Just like with version 4, version 5 is completely useless with IMX219: > > imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 > ipu1_csi0: pipeline start failed with -110 > imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 > ipu1_csi0: pipeline start failed with -110 > imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 > ipu1_csi0: pipeline start failed with -110 > If it's too difficult to get the imx219 csi-2 transmitter into the LP-11 state on power on, perhaps the csi-2 receiver can be a little more lenient on the transmitter and make the LP-11 timeout a warning instead of error-out. Can you try the attached change on top of the version 5 patchset? If that doesn't work then you're just going to have to fix the bug in imx219. Steve