From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Chen-Yu Tsai <wenst@chromium.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Brown <broonie@kernel.org>,
Zhiyong Tao <zhiyong.tao@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 3/9] mfd: mt6397: Split MediaTek MT6366 PMIC out of MT6358
Date: Fri, 4 Aug 2023 08:39:19 +0200 [thread overview]
Message-ID: <4762b4cc-f7bf-d4cb-a53b-ba2cfb5700fc@collabora.com> (raw)
In-Reply-To: <CAGXv+5EAR9Q5gGzkw=5UEEMOHbp56oKD5m_FyiHfZ3em8QwVAQ@mail.gmail.com>
Il 04/08/23 05:47, Chen-Yu Tsai ha scritto:
> On Thu, Aug 3, 2023 at 5:01 PM AngeloGioacchino Del Regno
> <angelogioacchino.delregno@collabora.com> wrote:
>>
>> Il 03/08/23 09:42, Chen-Yu Tsai ha scritto:
>>> The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
>>> a different set of regulators. Specifically, it lacks the camera related
>>> VCAM* LDOs, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.
>>>
>>> Add a separate compatible for the MT6366 PMIC. The regulator cell for
>>> this new entry uses a new compatible string matching MT6366.
>>>
>>> Fixes: c47383f84909 ("mfd: Add support for the MediaTek MT6366 PMIC")
>>> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
>>
>> I agree in that the LDOs are a bit different, but that's handled by the
>> mt6358-regulator driver regardless of the actual devicetree compatible,
>> as that's selected through a chip_id check.
>>
>> Finally, looking at the driver implementation itself, the addition of a
>> specific mt6366 compatible here seems redundant, because the actual HW is
>> - Handled by drivers, but
>> - Described by bindings
>>
>> Any other opinions on this?
>
> Well, on the bindings side, we can't have MT6366 fall back to MT6358,
> neither for the whole PMIC nor just for the regulators. For the latter
> it's because neither is a subset of the other, which a) makes them not
> fallback compatible as required by the spirit of fallback compatibles,
> and b) cannot be described with a fallback compatible, as the fallback
> one will have properties/nodes that are not valid for the other, and
> vice versa.
>
> Without a fallback compatible to lean in for the regulator driver, we
> will need to split out the compatible at the mfd level as well. AFAIU
> the mfd core matches mfd-cells based on the compatible strings it is
> given in the driver.
>
Hmm... you might actually be right on this.
But! I just want to be sure that we're doing things the right way.. and
I'd like to get an opinion from a bindings person, as I think that's the
most appropriate thing that can be done.
Krzysztof, please, can you check this one?
Thanks!
Angelo
> ChenYu
>
>> Regards,
>> Angelo
>>
>>> ---
>>> drivers/mfd/mt6397-core.c | 31 +++++++++++++++++++++++++++++++
>>> 1 file changed, 31 insertions(+)
>>>
>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
>>> index f6c1f80f94a4..3f8dfe60a59b 100644
>>> --- a/drivers/mfd/mt6397-core.c
>>> +++ b/drivers/mfd/mt6397-core.c
>>> @@ -206,6 +206,26 @@ static const struct mfd_cell mt6359_devs[] = {
>>> },
>>> };
>>>
>>> +static const struct mfd_cell mt6366_devs[] = {
>>> + {
>>> + .name = "mt6358-regulator",
>>> + .of_compatible = "mediatek,mt6366-regulator"
>>> + }, {
>>> + .name = "mt6358-rtc",
>>> + .num_resources = ARRAY_SIZE(mt6358_rtc_resources),
>>> + .resources = mt6358_rtc_resources,
>>> + .of_compatible = "mediatek,mt6358-rtc",
>>> + }, {
>>> + .name = "mt6358-sound",
>>> + .of_compatible = "mediatek,mt6358-sound"
>>> + }, {
>>> + .name = "mt6358-keys",
>>> + .num_resources = ARRAY_SIZE(mt6358_keys_resources),
>>> + .resources = mt6358_keys_resources,
>>> + .of_compatible = "mediatek,mt6358-keys"
>>> + },
>>> +};
>>> +
>>> static const struct mfd_cell mt6397_devs[] = {
>>> {
>>> .name = "mt6397-rtc",
>>> @@ -280,6 +300,14 @@ static const struct chip_data mt6359_core = {
>>> .irq_init = mt6358_irq_init,
>>> };
>>>
>>> +static const struct chip_data mt6366_core = {
>>> + .cid_addr = MT6358_SWCID,
>>> + .cid_shift = 8,
>>> + .cells = mt6366_devs,
>>> + .cell_size = ARRAY_SIZE(mt6366_devs),
>>> + .irq_init = mt6358_irq_init,
>>> +};
>>> +
>>> static const struct chip_data mt6397_core = {
>>> .cid_addr = MT6397_CID,
>>> .cid_shift = 0,
>>> @@ -358,6 +386,9 @@ static const struct of_device_id mt6397_of_match[] = {
>>> }, {
>>> .compatible = "mediatek,mt6359",
>>> .data = &mt6359_core,
>>> + }, {
>>> + .compatible = "mediatek,mt6366",
>>> + .data = &mt6366_core,
>>> }, {
>>> .compatible = "mediatek,mt6397",
>>> .data = &mt6397_core,
>>
>>
next prev parent reply other threads:[~2023-08-04 6:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 7:42 [PATCH 0/9] regulator: mt6366: Split out of MT6358 and cleanup Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 1/9] dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC Chen-Yu Tsai
2023-08-04 15:31 ` Conor Dooley
2023-08-03 7:42 ` [PATCH 2/9] mfd: mt6358: Add registers for MT6366 specific regulators Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 3/9] mfd: mt6397: Split MediaTek MT6366 PMIC out of MT6358 Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 3:47 ` Chen-Yu Tsai
2023-08-04 6:39 ` AngeloGioacchino Del Regno [this message]
2023-08-03 7:42 ` [PATCH 4/9] regulator: dt-bindings: mediatek: Add MT6366 PMIC Chen-Yu Tsai
2023-08-07 6:23 ` Krzysztof Kozlowski
2023-08-07 6:30 ` Chen-Yu Tsai
2023-08-07 6:36 ` Krzysztof Kozlowski
2023-08-03 7:42 ` [PATCH 5/9] regulator: mt6358: fix and drop type prefix in MT6366 regulator node names Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 10:13 ` Eugen Hristev
2023-08-07 3:54 ` Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 6/9] regulator: mt6358: Make MT6366 vcn18 LDO configurable Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 7/9] regulator: mt6358: Add missing regulators for MT6366 Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 8/9] regulator: mt6358: Add supply names for MT6366 regulators Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 9/9] soc: mediatek: pwrap: add support for MT6366 PMIC Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 3:49 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4762b4cc-f7bf-d4cb-a53b-ba2cfb5700fc@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wenst@chromium.org \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®