From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Andy Whitcroft <apw@shadowen.org>,
Balbir Singh <balbir@linux.vnet.ibm.com>,
Peter Zijlstra <a.p.zijlstra@chello.nl>
Subject: Re: [BUG] 2.6.24-git6 soft lockup detected while running libhugetlbfs
Date: Tue, 05 Feb 2008 12:02:31 +0530 [thread overview]
Message-ID: <47A802FF.3090807@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080201143302.GC26232@elte.hu>
Ingo Molnar wrote:
> * Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
>> The CONFIG_NO_HZ is not set and the system seems not be truly locked
>> up ,btw wc -l of the softlockup messages is around 108 times, while
>> running the libhugetlbfs only and this is reproducible with the
>> 2.6.24-git7 also.
>
> Peter just fixed a handful of bugs in this area - does the patch below
> help?
>
> Ingo
>
> ------------------>
> Subject: debug: softlockup looping fix
> From: Peter Zijlstra <a.p.zijlstra@chello.nl>
>
> Rafael J. Wysocki reported weird, multi-seconds delays during
> suspend/resume and bisected it back to:
>
> commit 82a1fcb90287052aabfa235e7ffc693ea003fe69
> Author: Ingo Molnar <mingo@elte.hu>
> Date: Fri Jan 25 21:08:02 2008 +0100
>
> softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks
>
> fix it:
>
> - restore the old wakeup mechanism
> - fix break usage in do_each_thread() { } while_each_thread().
> - fix the hotplug switch stmt, a fall-through case was broken.
>
> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
> kernel/softlockup.c | 30 ++++++++++++++++++++----------
> 1 file changed, 20 insertions(+), 10 deletions(-)
>
> Index: linux/kernel/softlockup.c
> ===================================================================
> --- linux.orig/kernel/softlockup.c
> +++ linux/kernel/softlockup.c
> @@ -101,6 +101,10 @@ void softlockup_tick(void)
>
> now = get_timestamp(this_cpu);
>
> + /* Wake up the high-prio watchdog task every second: */
> + if (now > (touch_timestamp + 1))
> + wake_up_process(per_cpu(watchdog_task, this_cpu));
> +
> /* Warn about unreasonable delays: */
> if (now <= (touch_timestamp + softlockup_thresh))
> return;
> @@ -191,11 +195,11 @@ static void check_hung_uninterruptible_t
> read_lock(&tasklist_lock);
> do_each_thread(g, t) {
> if (!--max_count)
> - break;
> + goto unlock;
> if (t->state & TASK_UNINTERRUPTIBLE)
> check_hung_task(t, now);
> } while_each_thread(g, t);
> -
> + unlock:
> read_unlock(&tasklist_lock);
> }
>
> @@ -218,14 +222,19 @@ static int watchdog(void *__bind_cpu)
> * debug-printout triggers in softlockup_tick().
> */
> while (!kthread_should_stop()) {
> + set_current_state(TASK_INTERRUPTIBLE);
> touch_softlockup_watchdog();
> - msleep_interruptible(10000);
> + schedule();
> +
> + if (kthread_should_stop())
> + break;
>
> if (this_cpu != check_cpu)
> continue;
>
> if (sysctl_hung_task_timeout_secs)
> check_hung_uninterruptible_tasks(this_cpu);
> +
> }
>
> return 0;
> @@ -259,13 +268,6 @@ cpu_callback(struct notifier_block *nfb,
> wake_up_process(per_cpu(watchdog_task, hotcpu));
> break;
> #ifdef CONFIG_HOTPLUG_CPU
> - case CPU_UP_CANCELED:
> - case CPU_UP_CANCELED_FROZEN:
> - if (!per_cpu(watchdog_task, hotcpu))
> - break;
> - /* Unbind so it can run. Fall thru. */
> - kthread_bind(per_cpu(watchdog_task, hotcpu),
> - any_online_cpu(cpu_online_map));
> case CPU_DOWN_PREPARE:
> case CPU_DOWN_PREPARE_FROZEN:
> if (hotcpu == check_cpu) {
> @@ -275,6 +277,14 @@ cpu_callback(struct notifier_block *nfb,
> check_cpu = any_online_cpu(temp_cpu_online_map);
> }
> break;
> +
> + case CPU_UP_CANCELED:
> + case CPU_UP_CANCELED_FROZEN:
> + if (!per_cpu(watchdog_task, hotcpu))
> + break;
> + /* Unbind so it can run. Fall thru. */
> + kthread_bind(per_cpu(watchdog_task, hotcpu),
> + any_online_cpu(cpu_online_map));
> case CPU_DEAD:
> case CPU_DEAD_FROZEN:
> p = per_cpu(watchdog_task, hotcpu);
Hi Ingo,
Thanks for the patch. The softlockup is not always reproducible, I tried six rounds without the patch to reproduce
the softlockup but was not able to. This is not seen after the 2.6.24-git8 and above, hope because of peters patch
is already there in in the git(s).
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
prev parent reply other threads:[~2008-02-05 6:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-30 6:41 Kamalesh Babulal
2008-01-30 16:59 ` Ingo Molnar
2008-01-30 17:05 ` Kamalesh Babulal
2008-02-01 14:33 ` Ingo Molnar
2008-02-05 6:32 ` Kamalesh Babulal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A802FF.3090807@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=a.p.zijlstra@chello.nl \
--cc=apw@shadowen.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome