From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Jarod Wilson <jwilson@redhat.com>
Cc: linux1394-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] firewire: fw-ohci: sync AT dma buffer before use
Date: Thu, 13 Mar 2008 00:16:43 +0100 [thread overview]
Message-ID: <47D8645B.5040305@s5r6.in-berlin.de> (raw)
In-Reply-To: <200803121743.29438.jwilson@redhat.com>
Jarod Wilson wrote:
> At least on my setup, where I could within seconds reliably reproduce a panic
> in handle_at_packet() by simply dd'ing from two drives on different controllers,
> the panic is gone.
>
> See http://bugzilla.kernel.org/show_bug.cgi?id=9617
Alas the panic from comment #10 is still there, i.e. instant crash when
plugging in an LSI based CD-RW (shortly after SCSI inquiry) --- but only
if CONFIG_DEBUG_PAGEALLOC=y.
Jarod, did your crashes happen with CONFIG_DEBUG_PAGEALLOC=n?
> --- a/drivers/firewire/fw-ohci.c
> +++ b/drivers/firewire/fw-ohci.c
> @@ -780,6 +780,10 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
>
> context_append(ctx, d, z, 4 - z);
>
> + /* Sync the DMA buffer up for the device to read from */
> + dma_sync_single_for_device(ohci->card.device, payload_bus,
> + packet->payload_length, DMA_TO_DEVICE);
> +
> /* If the context isn't already running, start it up. */
> reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
> if ((reg & CONTEXT_RUN) == 0)
>
The dma_sync_single_ call should be conditional for
packet->payload_length > 0. You would have noticed that if my patch
"firewire: fw-ohci: shut up false compiler warning on PPC32" wouldn't
have shadowed the corresponding compiler warning, which would be for
real after your patch. And, as David wrote, the call should come before
context_append.
However, we actually don't need it at all.
The dma_map_single(...) already syncs the payload for the device, and we
don't access the payload after that anymore. So this patch shouldn't do
anything, except that it inserts a call which happens to have barrier
characteristics on some platforms.
What we rather have to check is:
- Are we really writing into the context program the order that we
need to? This includes ordering WRT MMIO writes.
- Are we writing the branch address atomically? (No, we don't enforce
an atomic access at the moment, although it is very likely that the
compiler uses an atomic access.)
(We have to expect that the controller reads a descriptor while we write
into it.)
- Is there a use-after-free problem somewhere?
(A pattern in the original report and in a crash that you mentioned
looked like use of freed memory: "Faulting instruction address:
0x6b6b6b68" in comment #1.)
--
Stefan Richter
-=====-==--- --== -==--
http://arcgraph.de/sr/
next prev parent reply other threads:[~2008-03-12 23:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-12 21:43 Jarod Wilson
2008-03-12 22:35 ` David Moore
2008-03-12 23:24 ` Stefan Richter
2008-03-12 23:16 ` Stefan Richter [this message]
2008-03-13 1:11 ` Jarod Wilson
2008-03-13 8:49 ` Stefan Richter
2008-03-14 18:26 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47D8645B.5040305@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=jwilson@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®