[PATCH] dt-bindings: serial: rs485: Fix rs485-rts-delay property

[Michal Simek <michal.simek@amd.com>]

Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.

Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@amd.com>
---

 .../devicetree/bindings/serial/rs485.yaml     | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..fa9ad68ed24b 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -17,17 +17,17 @@ properties:
   rs485-rts-delay:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 50
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
-- 
2.43.0