mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Patrick Thompson <ptf@google.com>,
	Linux MMC Development <linux-mmc@vger.kernel.org>
Cc: Sangwhan Moon <sxm@google.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake
Date: Fri, 14 Oct 2022 08:33:06 +0300	[thread overview]
Message-ID: <48644cea-fa02-0250-752a-788e3a2dd303@intel.com> (raw)
In-Reply-To: <20221013210017.3751025-1-ptf@google.com>

On 14/10/22 00:00, Patrick Thompson wrote:
> Enhanced Strobe (ES) does not work correctly on the ASUS 1100 series of
> devices. Jasper Lake eMMCs (pci_id 8086:4dc4) are supposed to support
> ES. There are also two system families under the series, thus this is
> being scoped to the ASUS BIOS.
> 
> The failing ES prevents the installer from writing to disk. Falling back
> to HS400 without ES fixes the issue.
> 
> Signed-off-by: Patrick Thompson <ptf@google.com>
> 
> Fixes: 315e3bd7ac19 ("mmc: sdhci-pci: Add support for Intel JSL")

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> 
> ---
> 
> Changes in v3:
> * Remove redundant MMC_CAP2_HS400 selection
> 
> Changes in v2:
> * Only disable ES instead of CQE in its entirety.
> * Target Jasper Lake (JSL)
> * Target ASUS BIOS instead of specific system family
> 
>  drivers/mmc/host/sdhci-pci-core.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 169b84761041..34ea1acbb3cc 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -914,6 +914,12 @@ static bool glk_broken_cqhci(struct sdhci_pci_slot *slot)
>  		dmi_match(DMI_SYS_VENDOR, "IRBIS"));
>  }
>  
> +static bool jsl_broken_hs400es(struct sdhci_pci_slot *slot)
> +{
> +	return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_JSL_EMMC &&
> +			dmi_match(DMI_BIOS_VENDOR, "ASUSTeK COMPUTER INC.");
> +}
> +
>  static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
>  {
>  	int ret = byt_emmc_probe_slot(slot);
> @@ -922,9 +928,11 @@ static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
>  		slot->host->mmc->caps2 |= MMC_CAP2_CQE;
>  
>  	if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) {
> -		slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES;
> -		slot->host->mmc_host_ops.hs400_enhanced_strobe =
> -						intel_hs400_enhanced_strobe;
> +		if (!jsl_broken_hs400es(slot)) {
> +			slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES;
> +			slot->host->mmc_host_ops.hs400_enhanced_strobe =
> +							intel_hs400_enhanced_strobe;
> +		}
>  		slot->host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
>  	}
>  


  reply	other threads:[~2022-10-14  5:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-13 21:00 Patrick Thompson
2022-10-14  5:33 ` Adrian Hunter [this message]
2022-10-14 14:07 ` Ulf Hansson
2022-10-19 18:16   ` Patrick Thompson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48644cea-fa02-0250-752a-788e3a2dd303@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ptf@google.com \
    --cc=sxm@google.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®