From: Hans de Goede <j.w.r.degoede@hhs.nl>
To: Jean Delvare <khali@linux-fr.org>
Cc: Milton Miller <miltonm@bga.com>,
linuxppc-dev@ozlabs.org, Samuel Ortiz <samuel@sortiz.org>,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [RFC] (almost) booting allyesconfig -- please don't poke super-io without request_region
Date: Sun, 13 Jul 2008 08:31:32 +0200 [thread overview]
Message-ID: <4879A144.8060203@hhs.nl> (raw)
In-Reply-To: <20080711093650.4b98e3b7@hyperion.delvare>
Jean Delvare wrote:
> On Fri, 11 Jul 2008 09:27:26 +0200, Hans de Goede wrote:
>> Jean Delvare wrote:
>>> Hi Hans, hi Milton,
>>>
>> <snip>
>>
>>>> One could make a superio driver, and create sub-devices for the IR,
>>>> I2C, floppy, parallel, etc
>>>> nodes.
>>> There have been proposals to do this, and this would indeed be a very
>>> good idea, but unfortunately nobody took the time to implement this
>>> properly, push it upstream and volunteer to maintain it. The problem is
>>> that you don't need just a "driver", but a new subsystem, that needs to
>>> be designed and maintained.
>> Well, I believe there have been some lightweight superio locking coordinator
>> patches been floating around on the lm_sensors list, and I have reviewed them
>> and then a new version was done with my issues fixed.
>>
>> I kinda liked the proposed solution there, it was quite simple, moved all the
>> generic superio stuff into generic superio code, and added locking for super io
>> access from multiple drivers, what ever happened to those patches?
>
> As far as I know, nothing, and this is the problem. Somebody needs to
> step up and call him/herself the maintainer of the new code, and push
> it upstream and convert all the drivers (hwmon, watchdog, parallel
> port...) to make use of it. And I am not the one to do this, I am busy
> enough as is with i2c and hwmon.
>
Ok, I've mailed Jim Cromie, the author of the superio access patches
from end 2007 and told him we're still interested in this and asked him
if he is willing to drive this forward.
Regards,
Hans
next prev parent reply other threads:[~2008-07-13 6:50 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 21:12 Milton Miller
2008-07-10 21:14 ` mtd: remove __PPC__ hardcoded address from nand/diskonchip and devices/docprobe Milton Miller
2008-07-10 21:33 ` [lm-sensors] [RFC] (almost) booting allyesconfig -- please don't poke super-io without request_region Hans de Goede
2008-07-10 21:51 ` Milton Miller
2008-07-11 6:52 ` Jean Delvare
2008-07-11 7:27 ` Hans de Goede
2008-07-11 7:36 ` Jean Delvare
2008-07-13 6:31 ` Hans de Goede [this message]
2008-07-13 21:11 ` [lm-sensors] " David Hubbard
2008-07-13 21:22 ` Hans de Goede
2008-07-13 21:26 ` David Hubbard
2008-07-14 7:59 ` Jean Delvare
2008-07-14 17:09 ` Milton Miller
2008-07-14 17:30 ` [lm-sensors] " Hans de Goede
2008-07-14 17:55 ` David Hubbard
2008-07-15 8:36 ` Jean Delvare
2008-07-15 15:31 ` David Hubbard
2008-07-16 7:46 ` Jean Delvare
2008-07-16 8:09 ` Rene Herman
2008-07-15 8:28 ` Jean Delvare
[not found] ` <for-27-patch9@bga.com>
2008-07-12 20:02 ` [PATCH/RESEND] pci: dynids.use_driver_data considered harmful Milton Miller
2008-07-12 20:17 ` Greg KH
2008-07-12 20:58 ` Jean Delvare
2008-07-12 21:17 ` Milton Miller
2008-07-12 21:29 ` Milton Miller
[not found] ` <20080712041137.GA5933@kroah.com>
2008-07-12 21:08 ` [PATCH/RFC] " Milton Miller
2008-07-12 22:48 ` Milton Miller
2008-07-16 10:18 ` Milton Miller
2008-07-17 7:07 ` Greg KH
2008-07-17 14:36 ` Milton Miller
2008-08-06 7:31 ` Jean Delvare
2008-08-14 22:12 ` Greg KH
2008-08-15 14:50 ` Milton Miller
2008-08-15 15:50 ` Jean Delvare
2008-08-15 17:46 ` Jesse Barnes
2008-08-15 18:55 ` Jean Delvare
2008-08-15 19:15 ` Jesse Barnes
2008-08-16 6:22 ` Greg KH
2008-08-17 19:06 ` Jean Delvare
2008-08-18 3:50 ` Greg KH
2008-08-18 17:13 ` Jesse Barnes
2008-08-18 20:41 ` Jesse Barnes
2008-08-19 18:01 ` Milton Miller
2008-08-06 7:22 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4879A144.8060203@hhs.nl \
--to=j.w.r.degoede@hhs.nl \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=lm-sensors@lm-sensors.org \
--cc=miltonm@bga.com \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome