Yinghai Lu wrote:
> On Sat, Aug 23, 2008 at 11:26 AM, Rufus&  Azrael
> <rufus-azrael@numericable.fr>  wrote:
>    
>>> On Sat, Aug 23, 2008 at 4:58 AM, David Witbrodt<dawitbro@sbcglobal.net>
>>>   wrote:
>>>        
>>>>          
>>>>>   please send out after booting with hpet=disable
>>>>>   lspci -tv
>>>>>   lspci -vvxxx
>>>>>            
>>>>   Info attached:
>>>>          
>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
>>>         Subsystem: Elitegroup Computer Systems Device 2621
>>>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>>> Stepping- SERR- FastB2B- DisINTx+
>>>         Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>>         Region 0: I/O ports at fa00 [size=16]
>>>         Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
>>>         Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>>         Kernel driver in use: piix4_smbus
>>> 00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
>>> 10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>> 40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>> 50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
>>> 60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
>>> 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
>>> 80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>> 90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>> it seems kernel update BAR1 from 0xfed00000 to 0x80000000 after it can
>>> not give 0xfed00000 to that device.
>>> please try attached patch, and send out lspci -vvxxxx again.
>>> YH
>>> [PATCH] x86: protect hpet in BAR for one ATI chipset
>>>
>>> so avoid kernel don't allocate nre resource for it because it can not
>>> allocate the old
>>> address from BIOS.
>>>
>>> the same way like some IO APIC address in BAR handling
>>>
>>> Signed-off-by: Yinghai Lu<yhlu.kenrel@gmail.com>
>>>
>>> ---
>>>   drivers/pci/quirks.c |   16 ++++++++++++++++
>>>   1 file changed, 16 insertions(+)
>>> Index: linux-2.6/drivers/pci/quirks.c
>>> ===================================================================
>>> --- linux-2.6.orig/drivers/pci/quirks.c
>>> +++ linux-2.6/drivers/pci/quirks.c
>>> @@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_B
>>>                          PCI_DEVICE_ID_NX2_5709S,
>>>                          quirk_brcm_570x_limit_vpd);
>>>
>>> +static void __init quirk_hpet_in_bar(struct pci_dev *pdev)
>>> +{
>>> +       int i;
>>> +       unsigned int base, size;
>>> +
>>> +       /* the BAR1 is the location of the HPET...we must
>>> +        * not touch this, so forcibly insert it into the resource tree */
>>> +       base = pci_resource_start(pdev, 1);
>>> +       size = pci_resource_len(pdev, 1);
>>> +       if (base&&   size) {
>>> +               insert_resource(&iomem_resource,&pdev->resource[1]);
>>> +               dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,
>>> base + size - 1);
>>> +       }
>>> +}
>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485, quirk_hpet_in_bar);
>>> +
>>>   #ifdef CONFIG_PCI_MSI
>>>   /* Some chipsets do not support MSI. We cannot easily rely on setting
>>>    * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
>>>        
>> Hi Yinghai,
>>
>>
>> Your patch seems to be broken, see :
>>
>>      
>>>   CC      drivers/pci/quirks.o
>>> drivers/pci/quirks.c: In function 'quirk_hpet_in_bar':
>>> drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this
>>> function)
>>> drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
>>> only once
>>> drivers/pci/quirks.c:1804: erreur: for each function it appears in.)
>>> drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this
>>> function)
>>> drivers/pci/quirks.c:1804: attention : trop d'arguments pour le format
>>> drivers/pci/quirks.c:1795: attention : unused variable 'i'
>>> make[2]: *** [drivers/pci/quirks.o] Erreur 1
>>>        
>
> please check v2.
>
> YH
>    
Thanks Yinghai,

Your patch applied, I attach lspci -vvxxxx.

Regards.