mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Javen <javen_xu@realsil.com.cn>
To: Mohsin Bashir <mohsin.bashr@gmail.com>,
	"hkallweit1@gmail.com" <hkallweit1@gmail.com>,
	"nic_swsd@realtek.com" <nic_swsd@realtek.com>,
	"andrew+netdev@lunn.ch" <andrew+netdev@lunn.ch>,
	"davem@davemloft.net" <davem@davemloft.net>,
	"edumazet@google.com" <edumazet@google.com>,
	"kuba@kernel.org" <kuba@kernel.org>,
	"pabeni@redhat.com" <pabeni@redhat.com>,
	"horms@kernel.org" <horms@kernel.org>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH net-next v11 4/7] r8169: enable new interrupt mapping
Date: Mon, 17 Aug 2026 07:21:41 +0000	[thread overview]
Message-ID: <48ac068870fb49ff92c4dce9382d83e3@realsil.com.cn> (raw)
In-Reply-To: <9c73a611-8aab-411a-968f-86757e2756e5@gmail.com>

>
>
>On 8/13/26 6:52 PM, javen wrote:
>> From: Javen Xu <javen_xu@realsil.com.cn>
>>
>> This patch enables new interrupt mapping for RTL8127 and add error
>> pkts counter per ring.
>>
>> Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
>> ---
>> Changes in v2:
>>   - no changes
>>
>> Changes in v3:
>>   - no changes
>>
>> Changes in v4:
>>   - no changes
>>
>> Changes in v5:
>>   - no changes
>>
>> Changes in v6:
>>   - no changes
>>
>> Changes in v7:
>>   - no changes
>>
>> Changes in v8:
>>   - no changes
>>
>> Changes in v9:
>>   - no changes
>>
>> Changes in v10:
>>   - no changes
>>
>> Changes in v11:
>>   - add error pkts counter per ring
>> ---
>>   drivers/net/ethernet/realtek/r8169_main.c | 80 +++++++++++++++++++----
>>   1 file changed, 68 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>> b/drivers/net/ethernet/realtek/r8169_main.c
>> index b30f0a31d7c7..aa72c42c374d 100644
>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>> @@ -29,6 +29,7 @@
>>   #include <linux/prefetch.h>
>>   #include <linux/ipv6.h>
>>   #include <linux/unaligned.h>
>> +#include <linux/u64_stats_sync.h>
>>   #include <net/ip6_checksum.h>
>>   #include <net/netdev_queues.h>
>>   #include <net/phy/realtek_phy.h>
>> @@ -754,6 +755,15 @@ struct rtl8169_rx_ring {
>>       dma_addr_t rx_desc_phy_addr[NUM_RX_DESC];
>>       dma_addr_t rx_phy_addr;
>>       struct page *rx_databuff[NUM_RX_DESC];
>> +
>> +     struct {
>> +             u64 rx_errors;
>> +             u64 rx_dropped;
>> +             u64 rx_length_errors;
>> +             u64 rx_crc_errors;
>> +             u64 multicast;
>> +             struct u64_stats_sync syncp;
>> +     } stats;
>>   };
>>
>>   struct rtl8169_private {
>> @@ -3939,6 +3949,15 @@ DECLARE_RTL_COND(rtl_mac_ocp_e00e_cond)
>>       return r8168_mac_ocp_read(tp, 0xe00e) & BIT(13);
>>   }
>>
>> +static void rtl8169_hw_enable_vec_mapping(struct rtl8169_private *tp)
>> +{
>> +     u8 tmp;
>> +
>> +     tmp = RTL_R8(tp, INT_CFG0_8125);
>> +     tmp |= INT_CFG0_ENABLE_8125;
>> +     RTL_W8(tp, INT_CFG0_8125, tmp);
>> +}
>> +
>>   static void rtl_hw_start_8125_common(struct rtl8169_private *tp)
>>   {
>>       rtl_pcie_state_l2l3_disable(tp); @@ -3947,6 +3966,9 @@ static
>> void rtl_hw_start_8125_common(struct rtl8169_private *tp)
>>       RTL_W32(tp, RSS_CTRL_8125, 0);
>>       RTL_W16(tp, Q_NUM_CTRL_8125, 0);
>>
>> +     if (tp->irq_nvecs > 1)
>> +             rtl8169_hw_enable_vec_mapping(tp);
>> +
>>       /* disable UPS */
>>       r8168_mac_ocp_modify(tp, 0xd40a, 0x0010, 0x0000);
>>
>> @@ -4347,7 +4369,7 @@ static int rtl8169_init_ring(struct
>> rtl8169_private *tp)
>>
>>       memset(tp->tx_skb, 0, sizeof(tp->tx_skb));
>>
>> -     for (i = 0; i < tp->num_rx_rings; i++) {
>> +     for (int i = 0; i < tp->num_rx_rings; i++) {
>
>This looks like an unrelated change. Looking the function body, this is
>introducing a new bug on the cleanup path by changing the scope of i.

Yes, this change have been dropped in the next version.

Thanks,
Javen


  reply	other threads:[~2026-08-17  7:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14  1:51 [PATCH net-next v11 0/7] r8169: add RSS support for RTL8127 javen
2026-08-14  1:51 ` [PATCH net-next v11 1/7] r8169: add support for multi irqs javen
2026-08-14  1:51 ` [PATCH net-next v11 2/7] r8169: refactor RX path to prepare for multi-queue javen
2026-08-14  1:51 ` [PATCH net-next v11 3/7] r8169: add support for new interrupt mapping javen
2026-08-14 22:45   ` Mohsin Bashir
2026-08-17  7:21     ` Javen
2026-08-14  1:52 ` [PATCH net-next v11 4/7] r8169: enable " javen
2026-08-14 22:54   ` Mohsin Bashir
2026-08-17  7:21     ` Javen [this message]
2026-08-17 23:38   ` Jakub Kicinski
2026-08-14  1:52 ` [PATCH net-next v11 5/7] r8169: add support and enable rss javen
2026-08-14 23:00   ` Mohsin Bashir
2026-08-14  1:52 ` [PATCH net-next v11 6/7] r8169: move struct ethtool_ops javen
2026-08-14  1:52 ` [PATCH net-next v11 7/7] r8169: add get_channel support for ethtool javen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48ac068870fb49ff92c4dce9382d83e3@realsil.com.cn \
    --to=javen_xu@realsil.com.cn \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mohsin.bashr@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®