From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Banajit Goswami <bgoswami@quicinc.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/9] ASoC: codecs: lpass-tx-macro: add support for SM8550
Date: Sat, 11 Mar 2023 11:24:41 +0000 [thread overview]
Message-ID: <492bc15c-a59c-92f5-3d57-d6bfcf03c4ce@linaro.org> (raw)
In-Reply-To: <20230310132201.322148-7-krzysztof.kozlowski@linaro.org>
On 10/03/2023 13:21, Krzysztof Kozlowski wrote:
> Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
> use NPL clock, thus add flags allowing to skip it.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> sound/soc/codecs/lpass-tx-macro.c | 38 ++++++++++++++++++++++++-------
> 1 file changed, 30 insertions(+), 8 deletions(-)
>
> diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
> index 473d3cd39554..23371b21505e 100644
> --- a/sound/soc/codecs/lpass-tx-macro.c
> +++ b/sound/soc/codecs/lpass-tx-macro.c
> @@ -205,6 +205,9 @@
> #define TX_MACRO_AMIC_HPF_DELAY_MS 300
> #define MCLK_FREQ 19200000
>
> +/* NPL clock is expected */
> +#define TX_MACRO_FLAG_HAS_NPL_CLOCK BIT(0)
> +
Same nit as 3/9
Once done,
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
--srini
> enum {
> TX_MACRO_AIF_INVALID = 0,
> TX_MACRO_AIF1_CAP,
> @@ -1915,7 +1918,10 @@ static int tx_macro_register_mclk_output(struct tx_macro *tx)
> struct clk_init_data init;
> int ret;
>
> - parent_clk_name = __clk_get_name(tx->npl);
> + if (tx->npl)
> + parent_clk_name = __clk_get_name(tx->npl);
> + else
> + parent_clk_name = __clk_get_name(tx->mclk);
>
> init.name = clk_name;
> init.ops = &swclk_gate_ops;
> @@ -1946,10 +1952,13 @@ static int tx_macro_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> + kernel_ulong_t flags;
> struct tx_macro *tx;
> void __iomem *base;
> int ret, reg;
>
> + flags = (kernel_ulong_t)device_get_match_data(dev);
> +
> tx = devm_kzalloc(dev, sizeof(*tx), GFP_KERNEL);
> if (!tx)
> return -ENOMEM;
> @@ -1966,9 +1975,11 @@ static int tx_macro_probe(struct platform_device *pdev)
> if (IS_ERR(tx->mclk))
> return PTR_ERR(tx->mclk);
>
> - tx->npl = devm_clk_get(dev, "npl");
> - if (IS_ERR(tx->npl))
> - return PTR_ERR(tx->npl);
> + if (flags & TX_MACRO_FLAG_HAS_NPL_CLOCK) {
> + tx->npl = devm_clk_get(dev, "npl");
> + if (IS_ERR(tx->npl))
> + return PTR_ERR(tx->npl);
> + }
>
> tx->fsgen = devm_clk_get(dev, "fsgen");
> if (IS_ERR(tx->fsgen))
> @@ -2145,10 +2156,21 @@ static const struct dev_pm_ops tx_macro_pm_ops = {
> };
>
> static const struct of_device_id tx_macro_dt_match[] = {
> - { .compatible = "qcom,sc7280-lpass-tx-macro" },
> - { .compatible = "qcom,sm8250-lpass-tx-macro" },
> - { .compatible = "qcom,sm8450-lpass-tx-macro" },
> - { .compatible = "qcom,sc8280xp-lpass-tx-macro" },
> + {
> + .compatible = "qcom,sc7280-lpass-tx-macro",
> + .data = (void *)TX_MACRO_FLAG_HAS_NPL_CLOCK,
> + }, {
> + .compatible = "qcom,sm8250-lpass-tx-macro",
> + .data = (void *)TX_MACRO_FLAG_HAS_NPL_CLOCK,
> + }, {
> + .compatible = "qcom,sm8450-lpass-tx-macro",
> + .data = (void *)TX_MACRO_FLAG_HAS_NPL_CLOCK,
> + }, {
> + .compatible = "qcom,sm8550-lpass-tx-macro",
> + }, {
> + .compatible = "qcom,sc8280xp-lpass-tx-macro",
> + .data = (void *)TX_MACRO_FLAG_HAS_NPL_CLOCK,
> + },
> { }
> };
> MODULE_DEVICE_TABLE(of, tx_macro_dt_match);
next prev parent reply other threads:[~2023-03-11 11:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 13:21 [PATCH 0/9] ASoC: add audio digital codecs for Qualcomm SM8550 Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 1/9] ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 2/9] ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 3/9] ASoC: codecs: lpass-rx-macro: add support for SM8550 Krzysztof Kozlowski
2023-03-11 11:23 ` Srinivas Kandagatla
2023-03-11 11:27 ` Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 4/9] ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 5/9] ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro Krzysztof Kozlowski
2023-03-10 13:21 ` [PATCH 6/9] ASoC: codecs: lpass-tx-macro: add support for SM8550 Krzysztof Kozlowski
2023-03-11 11:24 ` Srinivas Kandagatla [this message]
2023-03-10 13:21 ` [PATCH 7/9] ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro Krzysztof Kozlowski
2023-03-10 13:22 ` [PATCH 8/9] ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro Krzysztof Kozlowski
2023-03-10 13:22 ` [PATCH 9/9] ASoC: codecs: lpass-wsa-macro: add support for SM8550 Krzysztof Kozlowski
2023-03-11 11:28 ` Srinivas Kandagatla
2023-03-10 14:35 ` [PATCH 0/9] ASoC: add audio digital codecs for Qualcomm SM8550 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=492bc15c-a59c-92f5-3d57-d6bfcf03c4ce@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andersson@kernel.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®