>>> On 2008/12/24 at 01:37 PM, "Martin Schlemmer" wrote: >>>> On 2008/12/24 at 01:34 AM, Willy Tarreau wrote: >> On Wed, Dec 24, 2008 at 12:28:53AM +0200, Martin Schlemmer wrote: Hi >>> I had a bit of an accident, and wondered if somebody already had to try to >> extract the initramfs image from an existing vmlinuz? >>> >>> I did try google, but either my search terms was not right, or nobody >> really touched on the subject before, because all the results mostly dealt >> with an external image. >>> >>> Any advice will be appreciated. >> >> yes, it happens to me from time to time. >> You first have to extract and uncompress the ELF image from vmlinuz. For >> this, look for the gzip signature 1F 8B 08 in your vmlinuz, and feed all >> data starting from this point to zcat. Either you do the same on the >> resulting file -and you may find several compressed images- or you simply >> pass it through "objdump -h". It will show you a .init.ramfs section. Use >> the fourth field as the file offset, and dump from that position. You'll >> find your initramfs, likely starting with 1F 8B 08 since it's supposed >> to be compressed with gzip. >> >> You need an hex editor, dd, zcat and objdump for this. It's not much >> complicated once you have the tools, but it might require a few attempts >> before finding the right image (I tend to find config.gz before initramfs). >> > > Appreciated, I should be able to go from here now - just getting the starting > point is sometimes the main issue. > Simple Perl script to do above in case anybody might find it useful in the future. M