From mboxrd@z Thu Jan  1 00:00:00 1970
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752008AbeAQFTv (ORCPT <rfc822;ralf@linux-mips.org> + 1 other);
        Wed, 17 Jan 2018 00:19:51 -0500
Received: from lelnx194.ext.ti.com ([198.47.27.80]:57475 "EHLO
        lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1750815AbeAQFTt (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Wed, 17 Jan 2018 00:19:49 -0500
Subject: Re: [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
To: Florian Fainelli <f.fainelli@gmail.com>,
        <bcm-kernel-feedback-list@broadcom.com>
References: <1515720668-4860-1-git-send-email-f.fainelli@gmail.com>
 <1515720668-4860-2-git-send-email-f.fainelli@gmail.com>
CC: Tejun Heo <tj@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
        Srinath Mannam <srinath.mannam@broadcom.com>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Vivek Gautam <vivek.gautam@codeaurora.org>,
        Dan Carpenter <dan.carpenter@oracle.com>,
        "open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)" 
        <linux-ide@vger.kernel.org>,
        open list <linux-kernel@vger.kernel.org>
From: Kishon Vijay Abraham I <kishon@ti.com>
Message-ID: <497d4542-75a7-fbe4-4ff2-07fe00380d0c@ti.com>
Date: Wed, 17 Jan 2018 10:49:31 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101
 Thunderbird/45.7.0
MIME-Version: 1.0
In-Reply-To: <1515720668-4860-2-git-send-email-f.fainelli@gmail.com>
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: 7bit
X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Return-Path: <linux-kernel-owner@vger.kernel.org>



On Friday 12 January 2018 07:01 AM, Florian Fainelli wrote:
> Implement the calibration callback to allow turning on the Clock-Data
> Recovery module clamping when necessary, e.g: during failure to identify
> a SATA hard drive from ahci_brcm.c::brcm_ahci_read_id.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/phy/broadcom/phy-brcm-sata.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
> index 3f953db70288..8000ce312d95 100644
> --- a/drivers/phy/broadcom/phy-brcm-sata.c
> +++ b/drivers/phy/broadcom/phy-brcm-sata.c
> @@ -150,6 +150,9 @@ enum sata_phy_regs {
>  	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
>  	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
>  	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
> +
> +	RXPMD_REG_BANK				= 0x1c0,
> +	RXPMD_RX_FREQ_MON_CONTROL1		= 0x87,
>  };
>  
>  enum sata_phy_ctrl_regs {
> @@ -505,8 +508,37 @@ static int brcm_sata_phy_init(struct phy *phy)
>  	return rc;
>  }
>  
> +static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
> +{
> +	void __iomem *base = brcm_sata_pcb_base(port);
> +	struct brcm_sata_phy *priv = port->phy_priv;
> +	u32 tmp = BIT(8);
> +
> +	brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
> +			 ~tmp, tmp);
> +}
> +
> +static int brcm_sata_phy_calibrate(struct phy *phy)
> +{
> +	struct brcm_sata_port *port = phy_get_drvdata(phy);
> +	int rc = -EOPNOTSUPP;
> +
> +	switch (port->phy_priv->version) {
> +	case BRCM_SATA_PHY_STB_28NM:
> +	case BRCM_SATA_PHY_STB_40NM:
> +		brcm_stb_sata_calibrate(port);
> +		rc = 0;
> +		break;
> +	default:
> +		break;
> +	};
> +
> +	return rc;
> +}
> +
>  static const struct phy_ops phy_ops = {
>  	.init		= brcm_sata_phy_init,
> +	.calibrate	= brcm_sata_phy_calibrate,
>  	.owner		= THIS_MODULE,
>  };
>  
>