Hello Jean-Francois, I have a Trust 610 LCD PowerC@m Zoom camera which can operate in webcam mode also (USB ID=06d6:0031). I tried to use it together with Linux 2.6.28 and with xawtv-3.95.dfsg.1 and with gqcam 0.9.1. The /dev/video0 appeared, but no usable picture was visible. However, I downloaded http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz and applied the attached patch (which might be incorrect for some aspects). So I was able to compile the module and both xawtv and gqcam showed the good picture. Do you have any idea why the gspcav1 diver is working and the one which is included in Linux 2.6.28 not? Here is the output of v4l-info with the patched working gspcav1 driver: $ v4l-info ### video4linux device info [/dev/video0] ### general info VIDIOCGCAP name : "Trust 610 LCD PowerC@m Zoom" type : 0x1 [CAPTURE] channels : 1 audios : 0 maxwidth : 464 maxheight : 480 minwidth : 176 minheight : 144 channels VIDIOCGCHAN(0) channel : 0 name : "SPCA533" tuners : 0 flags : 0x0 [] type : CAMERA norm : 0 tuner ioctl VIDIOCGTUNER: Invalid argument audio ioctl VIDIOCGAUDIO: Invalid argument picture VIDIOCGPICT brightness : 32768 hue : 0 colour : 4096 contrast : 8192 whiteness : 0 depth : 24 palette : RGB24 buffer VIDIOCGFBUF base : (nil) height : 0 width : 0 depth : 0 bytesperline : 0 window VIDIOCGWIN x : 0 y : 0 width : 384 height : 288 chromakey : 0 flags : 0 Regards, Márton Németh