mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Milan Broz <mbroz@redhat.com>
To: Alexander Holler <holler@ahsoftware.de>
Cc: linux-kernel@vger.kernel.org, Alasdair G Kergon <agk@redhat.com>,
	device-mapper development <dm-devel@redhat.com>
Subject: [PATCH] Re: Oops using 2.6.28.n after a lazy umount of a crypted loop-device
Date: Thu, 05 Mar 2009 12:58:02 +0100	[thread overview]
Message-ID: <49AFBE4A.1010605@redhat.com> (raw)
In-Reply-To: <49AFA565.6030902@ahsoftware.de>

Alexander Holler wrote:

> Hello,
>
> for some reason I can't remember I've done a lazy umount follwing the
> deregistration of the loop-device. The commands in question are:
>
> ---------
> umount -l /mnt/crypted
> cryptsetup luksClose crypted
> losetup -d /dev/loop1
> ---------
>
> Using Kernels 2.6.28.2 and .7 this two times resulted
> in an Oops like the following (both having the same Call Trace):
>
>   
Please Can you try attached patch if helps here?
(Patch is not perfect, but should help, at least identify that
it is the same problem I am fixing:-)

Milan
--
mbroz@redhat.com

dm crypt: Wait for possible unfinished endio() call in destructor

When user set dm-crypt over loop device and the loop thread processing
bios calls bio_endio later than the dm-crypt mapping is destroyed
(including mempool for dm io request), the endio can cause this OOPs:

(mempool_free from already destroyed mempool).

[   70.381058] EIP is at mempool_free+0x12/0x6b
...
[   70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000)
...
[   70.381058] Call Trace:
[   70.381058]  [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt]
[   70.381058]  [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt]
[   70.381058]  [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod]
[   70.381058]  [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod]
[   70.381058]  [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<c02bad86>] ? loop_thread+0x380/0x3b7
[   70.381058]  [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165
[   70.381058]  [<c013754f>] ? autoremove_wake_function+0x0/0x33
[   70.381058]  [<c02baa06>] ? loop_thread+0x0/0x3b7

Fix it by adding reference counter into crypt config and wait till
all endio operations finishes.

Signed-off-by: Milan Broz <mbroz@redhat.com>
---
 drivers/md/dm-crypt.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 35bda49..fa37c87 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -95,6 +95,8 @@ struct crypt_config {
 	struct workqueue_struct *io_queue;
 	struct workqueue_struct *crypt_queue;
 
+	atomic_t pending;
+
 	/*
 	 * crypto related data
 	 */
@@ -566,6 +568,7 @@ static void crypt_dec_pending(struct dm_crypt_io *io)
 	}
 
 	mempool_free(io, cc->io_pool);
+	atomic_dec(&cc->pending);
 }
 
 /*
@@ -1113,6 +1116,8 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		goto bad_crypt_queue;
 	}
 
+	atomic_set(&cc->pending, 0);
+
 	ti->private = cc;
 	return 0;
 
@@ -1149,6 +1154,9 @@ static void crypt_dtr(struct dm_target *ti)
 	destroy_workqueue(cc->io_queue);
 	destroy_workqueue(cc->crypt_queue);
 
+	while (atomic_read(&cc->pending))
+		msleep(1);
+
 	if (cc->req)
 		mempool_free(cc->req, cc->req_pool);
 
@@ -1171,8 +1179,11 @@ static void crypt_dtr(struct dm_target *ti)
 static int crypt_map(struct dm_target *ti, struct bio *bio,
 		     union map_info *map_context)
 {
+	struct crypt_config *cc = ti->private;
 	struct dm_crypt_io *io;
 
+	atomic_inc(&cc->pending);
+
 	io = crypt_io_alloc(ti, bio, bio->bi_sector - ti->begin);
 
 	if (bio_data_dir(io->base_bio) == READ)



  reply	other threads:[~2009-03-05 11:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-05 10:11 Alexander Holler
2009-03-05 11:58 ` Milan Broz [this message]
2009-03-06  6:16   ` [PATCH] " Alexander Holler
2009-03-06  8:24     ` Milan Broz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49AFBE4A.1010605@redhat.com \
    --to=mbroz@redhat.com \
    --cc=agk@redhat.com \
    --cc=dm-devel@redhat.com \
    --cc=holler@ahsoftware.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome