mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jiaxun Yang" <jiaxun.yang@flygoat.com>
To: "Oleksij Rempel" <linux@rempel-privat.de>,
	"Qing Zhang" <zhangqing@loongson.cn>,
	"Huacai Chen" <chenhuacai@kernel.org>,
	"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Marc Zyngier" <maz@kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	"Ming Wang" <wangming01@loongson.cn>
Subject: Re: [PATCH v4 2/7] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
Date: Wed, 10 Mar 2021 20:12:43 +0800	[thread overview]
Message-ID: <49ddbef4-3d2a-4adb-8fd0-37bba0530c4c@www.fastmail.com> (raw)
In-Reply-To: <2484af69-13d1-09ff-3785-6c89cac4ffbd@rempel-privat.de>



On Wed, Mar 10, 2021, at 6:57 PM, Oleksij Rempel wrote:
> Hi,
> 
> Am 10.03.21 um 08:56 schrieb Qing Zhang:
> > Add DTB boot support, only support Loongson-2K1000 processor
> > for now, determine whether to use the built-in DTB or the DTB
> > from the firmware by checking the range of CKSEG0 and XKPHYS.
> > loongson_fw_interface will be used in the future.
> >
> > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> > Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> > Tested-by: Ming Wang <wangming01@loongson.cn>
> > ---
> >
> > v3-v4: Standard submission of information
> >        Fix error handling
> >
> >  .../include/asm/mach-loongson64/boot_param.h     |  6 ++++++
> >  arch/mips/include/asm/mach-loongson64/loongson.h |  3 ++-
> >  arch/mips/loongson64/env.c                       | 13 ++++++++++++-
> >  arch/mips/loongson64/init.c                      | 16 ++++++++++++++--
> >  4 files changed, 34 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
> > index 4592841b6b0c..43737401dc06 100644
> > --- a/arch/mips/include/asm/mach-loongson64/boot_param.h
> > +++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
> > @@ -198,7 +198,13 @@ enum loongson_bridge_type {
> >  	VIRTUAL = 3
> >  };
> >
> > +enum loongson_fw_interface {
> > +	LOONGSON_LEFI,
> > +	LOONGSON_DTB,
> > +};
> > +
> >  struct loongson_system_configuration {
> > +	enum loongson_fw_interface fw_interface;
> >  	u32 nr_cpus;
> >  	u32 nr_nodes;
> >  	int cores_per_node;
> > diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
> > index ac1c20e172a2..3f885fa26ba6 100644
> > --- a/arch/mips/include/asm/mach-loongson64/loongson.h
> > +++ b/arch/mips/include/asm/mach-loongson64/loongson.h
> > @@ -23,7 +23,8 @@ extern u32 memsize, highmemsize;
> >  extern const struct plat_smp_ops loongson3_smp_ops;
> >
> >  /* loongson-specific command line, env and memory initialization */
> > -extern void __init prom_init_env(void);
> > +extern void __init prom_dtb_init_env(void);
> > +extern void __init prom_lefi_init_env(void);
> >  extern void __init szmem(unsigned int node);
> >  extern void *loongson_fdt_blob;
> >
> > diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
> > index 51a5d050a94c..e7d3a06175e3 100644
> > --- a/arch/mips/loongson64/env.c
> > +++ b/arch/mips/loongson64/env.c
> > @@ -43,7 +43,18 @@ const char *get_system_type(void)
> >  	return "Generic Loongson64 System";
> >  }
> >
> > -void __init prom_init_env(void)
> > +
> > +void __init prom_dtb_init_env(void)
> > +{
> > +	if ((fw_arg2 < CKSEG0 || fw_arg2 > CKSEG1)
> > +		&& (fw_arg2 < XKPHYS || fw_arg2 > XKSEG))
> > +
> > +		loongson_fdt_blob = __dtb_loongson64_2core_2k1000_begin;
> > +	else
> > +		loongson_fdt_blob = (void *)fw_arg2;
> > +}
> > +
> > +void __init prom_lefi_init_env(void)
> >  {
> >  	struct boot_params *boot_p;
> >  	struct loongson_params *loongson_p;
> > diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
> > index cfa788bca871..ed280b73bf89 100644
> > --- a/arch/mips/loongson64/init.c
> > +++ b/arch/mips/loongson64/init.c
> > @@ -52,6 +52,10 @@ void __init szmem(unsigned int node)
> >  	static unsigned long num_physpages;
> >  	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
> >
> > +	/* Otherwise come from DTB */
> > +	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
> > +		return;
> > +
> >  	/* Parse memory information and activate */
> >  	for (i = 0; i < loongson_memmap->nr_map; i++) {
> >  		node_id = loongson_memmap->map[i].node_id;
> > @@ -94,12 +98,20 @@ static void __init prom_init_memory(void)
> >  void __init prom_init(void)
> >  {
> >  	fw_init_cmdline();
> > -	prom_init_env();
> > +
> > +	if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
> > +		loongson_sysconf.fw_interface = LOONGSON_DTB;
> > +		prom_dtb_init_env();
> > +	} else {
> > +		loongson_sysconf.fw_interface = LOONGSON_LEFI;
> > +		prom_lefi_init_env();
> > +	}
> 
> Is it possible to make it compatible with MIPS UHI boot protocol? So 
> boot loaders will be able to
> handle Loongson kernel images as any other MIPS kernel images?

Hmm, as Loongson did many stuff in non-generic manner it's almost impossible :-(
Also their are many devices shipped with current boot protocol.


> 
> This protocol is described here on page 15, "3. Boot protocols"
> https://docplayer.net/62444141-Unified-hosting-interface-md01069-reference-manual.html
> 
> According to this protocol, you should have:
> fw_arg0 = -2
> fw_arg1 = Virtual (kseg0) address of Device Tree Blob
> 
> This would made LS a first grade resident for many boot loaders and 
> save a lot of needles headaches.

Loongson is stepping away from MIPS and it seems like they're going to use EDK-II for their Loongarch.
TBH I've checked Loongson's PMON code and realized it can't be ported to other projects easily.

Tons of unregonized assembly code.


Thanks.

- Jiaxun

> 
> --
> Regards,
> Oleksij
>

-- 
- Jiaxun

  reply	other threads:[~2021-03-10 12:13 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  7:56 [PATCH v4 0/7] Add basic support for Loongson-2K1000 Qing Zhang
2021-03-10  7:56 ` [PATCH v4 1/7] MIPS: Loongson64: DeviceTree " Qing Zhang
2021-03-10  7:56 ` [PATCH v4 2/7] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI Qing Zhang
2021-03-10 10:57   ` Oleksij Rempel
2021-03-10 12:12     ` Jiaxun Yang [this message]
2021-03-10 13:26       ` Oleksij Rempel
     [not found]         ` <a2b1ad18-8f4b-8e43-e175-c372580a7168@flygoat.com>
2021-03-10 16:03           ` Oleksij Rempel
2021-03-10  7:56 ` [PATCH v4 3/7] MIPS: Loongson64: Add support for the Loongson-2K1000 to get cpu_clock_freq Qing Zhang
2021-03-10  8:50   ` Sergei Shtylyov
2021-03-10  9:37     ` zhangqing
2021-03-10 12:06       ` Jiaxun Yang
2021-03-10  7:56 ` [PATCH v4 4/7] MIPS: Loongson64: Add Loongson-2K1000 early_printk_port Qing Zhang
2021-03-10  7:56 ` [PATCH v4 5/7] irqchip/loongson-liointc: irqchip add 2.0 version Qing Zhang
2021-03-10  7:56 ` [PATCH v4 6/7] dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC Qing Zhang
2021-03-10 12:04   ` Jiaxun Yang
2021-03-11  1:43     ` zhangqing
2021-03-10  7:56 ` [PATCH v4 7/7] MIPS: Loongson64: Add a Loongson-2K1000 default config file Qing Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49ddbef4-3d2a-4adb-8fd0-37bba0530c4c@www.fastmail.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhuacai@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=wangming01@loongson.cn \
    --cc=zhangqing@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®