Hi,

While playing around with netem (time, not packet count based loss-
bursts) I experienced soft lockups several times - to exclude it was my
modifications causing this I recompiled with the original and it is
still locking up.
I captured several of those traces via the thankfully
still working netconsole.
The simplest policy I could reproduce the error with was:
tc qdisc add dev eth0 root handle 1: netem delay 10ms loss 0

I could not reproduce the error without delay - but that may only be a
timing issue, as the host I was mainly transferring data to was on a
local network.
I could not reproduce the issue on lo.

The time to reproduce the error varied from seconds after executing tc 
to several minutes.

Traces 5+6 are made with vanilla 52989765629e7d182b4f146050ebba0abf2cb0b7

The earlier traces are made with parts of my patches applied, and only 
included for completeness as I don't believe my modifications were 
causing this and all traces are different, so it may give some clues.

Lockdep was enabled but did not diagnose anything relevant (one dvb 
warning during bootup).

Any ideas for debugging?


Andres


PS: I also could reproduce the issue without netconsole but in vain of a 
serial console could not capture a trace.