From: Parag Warudkar <kernel-stuff@comcast.net>
To: nagar@watson.ibm.com
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [Patch 1/4] Delay accounting: Initialization
Date: Tue, 15 Nov 2005 17:53:32 -0500 [thread overview]
Message-ID: <4ABDC730-2888-4DBE-B1DC-62362A87EEB7@comcast.net> (raw)
In-Reply-To: <437A613A.1020705@watson.ibm.com>
On Nov 15, 2005, at 5:29 PM, Shailabh Nagar wrote:
>>
>> Curious as to when would this occur. Probably for tasks running on a
>> SMP machine for a very short period of time (timer drift should
>> not be
>> hopefully that high) and switching CPUs in that short period of time?
>
> Possibly. Also, the simpler case of wraparound needs to be handled.
> Since
> one delay sample isn't significant, dropping it seemed the safest bet.
>
Yep, better to report zero than invalid values.
>
>>> +config STATS_CONNECTOR
>>> +config DELAY_ACCT
>>
>>
>> Probably TASK_DELAY_STATS_CONNECTOR and TASK_DELAY_ACCOUNTING are
>> better names?
>
> TASK_DELAY_ACCOUNTING is better since thats what the code protected
> does.
>
> STATS_CONNECTOR can be used to transmit stats other than per-task
> delays (current patch also transmits cpu run time). Also there's a
> possibility
> that the overall per-task accounting solution whose discussion was
> proposed
> by Andrew will deviate from delays. So how about TASK_STATS_CONNECTOR.
>>
Sounds good.
>> Does this mean, whether or not the per task delay accounting is used,
>> we have a constant overhead of sizeof(spinlock_t) + 2*sizeof
>> (uint32_t)
>> + 2* sizeof(uint64_t) bytes going into the struct task_struct?.
>> Is it
>> possible/beneficial to use struct task_delay_info *delays instead
>> and
>> allocate it if task wants to use the information?
>>
>
> Doing so would have value in the case where the feature is
> configured but
> no one ever registers to listen for it.
Precisely. Such a feature will be used only occasionally I suppose.
I didn't read the code deeply but are any scheduling decisions
altered based on
this data? If not, then it makes sense to not account unless required.
I think it should be possible to do it on demand, per process instead
of forcing
the accounting on _all_ processes which cumulatively becomes a
sizeable o/h.
Per Process activation of this feature will add significant value
IMHO. (Of course,
if that's possible in first place.)
> The cost of doing this would be
> - adding more code to the fork path to allocate conditionally
Just an unlikely branch for normal code path - not a big deal.
Also I am thinking it could be handled outside of fork?
> - make the collecting of the delays conditional on a similar check
Weighing this against the actual accounting - I think it's a win.
> - cache pollution from following an extra pointer in the pgflt/
> io_schedule paths
> I'm not sure is this really matters for these two code paths.
Possibly.
> Even if one does this, once the first listener registers, all
> future tasks
> (and even the current ones) will have to go ahead and allocate the
> structure
> and accounting of delays will have to switch to unconditional mode.
> This is
> because the delay data has cumulative value...future listeners will be
> interested in data collected earlier (as long as task is still
> running). And
> once the first listener registers, you can no longer be sure no
> one's interested
> in the future.
>
Is it possible to do it per process? Forcing it on all processes is
what I was trying
to avoid given the feature's usage pattern.
> Another alternative is to let userland control the overhead of
> allocation and
> collection completely through a /proc/sys/kernel/delayacct variable.
> When its switched on, it triggers an allocation for all existing
> tasks in the
> system, turns on allocation in fork() for future tasks, and
> collection of the stats.
> When turned off, collection of stats stops as does allocation for
> future tasks
> (not worth going in and deallocating structs for existing tasks).
> Does this seem worth it ?
>
Definitely not unless we can do it per process and on demand.
> -- Shailabh
>
Cheers
Parag
next prev parent reply other threads:[~2005-11-15 22:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-15 4:35 Shailabh Nagar
2005-11-15 4:20 ` Andrew Morton
2005-11-15 6:49 ` Marcelo Tosatti
2005-11-15 15:19 ` Shailabh Nagar
2005-11-15 12:20 ` Marcelo Tosatti
2005-11-15 12:34 ` Marcelo Tosatti
2005-11-15 15:08 ` Shailabh Nagar
2005-11-16 1:06 ` Peter Chubb
2005-11-16 1:48 ` Shailabh Nagar
2005-11-16 1:50 ` Andi Kleen
2005-11-16 1:52 ` Peter Chubb
2005-11-15 4:25 ` Parag Warudkar
2005-11-15 22:29 ` Shailabh Nagar
2005-11-15 22:53 ` Parag Warudkar [this message]
2005-11-16 0:45 ` Shailabh Nagar
2005-11-16 2:41 ` Parag Warudkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ABDC730-2888-4DBE-B1DC-62362A87EEB7@comcast.net \
--to=kernel-stuff@comcast.net \
--cc=linux-kernel@vger.kernel.org \
--cc=nagar@watson.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®