mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Randy Dunlap <randy.dunlap@oracle.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	Matt Fleming <matt@console-pimps.org>,
	linux-mmc@vger.kernel.org
Subject: Re: [PATCH v4] MMC: Add JZ4740 mmc driver
Date: Mon, 12 Jul 2010 14:41:39 -0700	[thread overview]
Message-ID: <4C3B8C13.3040009@oracle.com> (raw)
In-Reply-To: <1278970413-21617-1-git-send-email-lars@metafoo.de>

Lars-Peter Clausen wrote:
> This patch adds support for the mmc controller on JZ4740 SoCs.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> Acked-by: Matt Fleming <matt@console-pimps.org>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Matt Fleming <matt@console-pimps.org>
> Cc: linux-mmc@vger.kernel.org
> 
> ---
>  arch/mips/include/asm/mach-jz4740/jz4740_mmc.h |   15 +
>  drivers/mmc/host/Kconfig                       |    8 +
>  drivers/mmc/host/Makefile                      |    1 +
>  drivers/mmc/host/jz4740_mmc.c                  | 1024 ++++++++++++++++++++++++
>  4 files changed, 1048 insertions(+), 0 deletions(-)
>  create mode 100644 arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
>  create mode 100644 drivers/mmc/host/jz4740_mmc.c
> 
> diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
> new file mode 100644
> index 0000000..8543f43
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
> @@ -0,0 +1,15 @@
> +#ifndef __LINUX_MMC_JZ4740_MMC
> +#define __LINUX_MMC_JZ4740_MMC
> +
> +struct jz4740_mmc_platform_data {
> +	int gpio_power;
> +	int gpio_card_detect;
> +	int gpio_read_only;
> +	unsigned card_detect_active_low:1;
> +	unsigned read_only_active_low:1;
> +	unsigned power_active_low:1;
> +
> +	unsigned data_1bit:1;
> +};
> +
> +#endif
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index f06d06e..546fc49 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -81,6 +81,14 @@ config MMC_RICOH_MMC
>  
>  	  If unsure, say Y.
>  
> +config MMC_JZ4740
> +	tristate "JZ4740 SD/Multimedia Card Interface support"
> +	depends on MACH_JZ4740

What tree has the kconfig symbol MACH_JZ4740 in it?
I can't seem to find it...

Should the depends also say anything about GPIO?
I only ask because the header file above mentions gpio.

> +	help
> +	  This selects the Ingenic Z4740 SD/Multimedia card Interface.
> +	  If you have an ngenic platform with a Multimedia Card slot,

	                 Ingenic ?

> +	  say Y or M here.
> +
>  config MMC_SDHCI_OF
>  	tristate "SDHCI support on OpenFirmware platforms"
>  	depends on MMC_SDHCI && PPC_OF


  reply	other threads:[~2010-07-12 21:43 UTC|newest]

Thread overview: 111+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-19  5:08 [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 01/26] MIPS: Add base support for " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-07-17 12:08   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-28  1:24   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:10     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-07-17 12:11   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-28  1:23   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:12     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-07-17 12:13   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-19 10:43   ` Marek Vasut
2010-06-19 13:05     ` Lars-Peter Clausen
2010-06-19 13:37       ` Wan ZongShun
2010-06-19 13:53         ` Lars-Peter Clausen
2010-06-19 14:36           ` Wan ZongShun
2010-06-19 14:04       ` Marek Vasut
2010-06-19 17:42         ` Lars-Peter Clausen
2010-06-19 17:53           ` Geert Uytterhoeven
2010-06-19 19:29   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  1:13     ` [rtc-linux] " Wan ZongShun
2010-06-20  1:23       ` Lars-Peter Clausen
2010-06-20  1:30         ` Wan ZongShun
2010-06-22  5:53     ` Alessandro Zummo
2010-06-19  5:08 ` [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-07-04 22:27   ` Lars-Peter Clausen
2010-07-07 23:41     ` Andrew Morton
2010-07-08 13:28       ` Lars-Peter Clausen
2010-07-08 16:46         ` Andrew Morton
2010-07-09  1:26     ` Jaya Kumar
2010-07-09 15:31       ` Lars-Peter Clausen
2010-07-17 12:14   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-07-04 22:35   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND Lars-Peter Clausen
2010-07-08  6:06   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Artem Bityutskiy
2010-07-08 13:20     ` Lars-Peter Clausen
2010-07-08 13:19       ` Artem Bityutskiy
2010-07-08 14:02         ` Lars-Peter Clausen
2010-07-08 14:14           ` Artem Bityutskiy
2010-07-17 12:15   ` [PATCH v3] " Lars-Peter Clausen
2010-07-18 16:54     ` Artem Bityutskiy
2010-07-18 17:02       ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-19 14:46   ` Matt Fleming
2010-06-19 15:29     ` Lars-Peter Clausen
2010-06-28  1:20   ` [PATCH v3] " Lars-Peter Clausen
2010-06-29 20:17     ` Matt Fleming
2010-07-01 15:47       ` Lars-Peter Clausen
2010-06-30 20:55     ` Andrew Morton
2010-07-01 15:45       ` Lars-Peter Clausen
2010-07-12 21:33     ` [PATCH v4] " Lars-Peter Clausen
2010-07-12 21:41       ` Randy Dunlap [this message]
2010-07-12 22:07         ` Lars-Peter Clausen
2010-07-12 22:20       ` [PATCH v5] " Lars-Peter Clausen
2010-07-12 22:45         ` Joe Perches
2010-07-12 23:45           ` Lars-Peter Clausen
2010-07-15 21:06         ` [PATCH v6] " Lars-Peter Clausen
2010-07-15 21:16           ` Andrew Morton
2010-07-15 21:37             ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-19 17:17   ` Greg KH
2010-06-19  5:08 ` [PATCH v2 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-19 14:49   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20 13:11     ` Mark Brown
2010-06-21 22:46     ` [PATCH v4] " Lars-Peter Clausen
2010-06-22 10:12       ` Liam Girdwood
2010-06-22 23:12       ` Mark Brown
2010-06-19  5:08 ` [PATCH v2 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-19 14:50   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 22/26] MFD: Add JZ4740 ADC driver Lars-Peter Clausen
2010-07-04 22:47   ` Lars-Peter Clausen
2010-07-05 14:53   ` Samuel Ortiz
2010-07-05 15:43     ` Lars-Peter Clausen
2010-07-05 15:53       ` Samuel Ortiz
2010-07-12  1:48   ` [PATCH v3] " Lars-Peter Clausen
2010-07-14  9:19     ` Samuel Ortiz
2010-06-19  5:08 ` [PATCH v2 23/26] hwmon: " Lars-Peter Clausen
2010-06-19  8:36   ` [lm-sensors] " Jean Delvare
2010-06-19 12:58     ` Lars-Peter Clausen
2010-06-19 14:47   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19 16:24     ` [lm-sensors] " Jean Delvare
2010-06-19 17:59       ` Lars-Peter Clausen
2010-06-19 19:32     ` [PATCH v4] " Lars-Peter Clausen
2010-06-20  6:32       ` [lm-sensors] " Jean Delvare
2010-06-19  5:08 ` [PATCH v2 24/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-27  1:58   ` Lars-Peter Clausen
2010-06-28 11:43     ` Anton Vorontsov
2010-06-19  5:08 ` [PATCH v2 25/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-07-17 12:16   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-19 14:52   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Thomas Bogendoerfer
2010-06-20 14:31   ` Lars-Peter Clausen
2010-06-20 16:34     ` Thomas Bogendoerfer
2010-06-20 16:49       ` Lars-Peter Clausen
2010-06-20 17:01         ` Thomas Bogendoerfer
2010-06-20 17:57           ` Florian Fainelli
2010-06-20 18:30             ` Lars-Peter Clausen
2010-06-21  2:56   ` Xiangfu Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C3B8C13.3040009@oracle.com \
    --to=randy.dunlap@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=matt@console-pimps.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome