[PATCH (v2)] cxacru: Use a bulk/int URB to access the command endpoint

[Simon Arlott <simon@fire.lp0.eu>]

The command endpoint is either a bulk or interrupt endpoint, but using
the wrong type of transfer causes an error if CONFIG_USB_DEBUG is
enabled after commit f661c6f8c67bd55e93348f160d590ff9edf08904, which
checks for this mismatch.

Detect which type of endpoint it is and use a bulk/int URB as
appropriate. There are other function calls specifying a bulk pipe,
but usb_clear_halt doesn't use the pipe type (only the endpoint) and
usb_bulk_msg auto-detects interrupt transfers.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
 drivers/usb/atm/cxacru.c |   24 ++++++++++++++++++++++--
 1 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 593fc5e..5af23cc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1127,6 +1127,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 {
 	struct cxacru_data *instance;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
 	int ret;
 
 	/* instance init */
@@ -1171,15 +1172,34 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 		goto fail;
 	}
 
-	usb_fill_int_urb(instance->rcv_urb,
+	if (!cmd_ep) {
+		dbg("cxacru_bind: no command endpoint");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			== USB_ENDPOINT_XFER_INT) {
+		usb_fill_int_urb(instance->rcv_urb,
 			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->rcv_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->rcv_done, 1);
 
-	usb_fill_int_urb(instance->snd_urb,
+		usb_fill_int_urb(instance->snd_urb,
 			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->snd_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->snd_done, 4);
+	} else {
+		usb_fill_bulk_urb(instance->rcv_urb,
+			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->rcv_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->rcv_done);
+
+		usb_fill_bulk_urb(instance->snd_urb,
+			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->snd_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->snd_done);
+	}
 
 	mutex_init(&instance->cm_serialize);
 
-- 
1.7.0.4

-- 
Simon Arlott