[PATCH v2 1/1] Don't Send Feature Reports on Interrupt Endpoint

[Alan Ott <alan@signal11.us>]

Feature reports should only be sent on the control endpoint.

The USB HID standard is unclear and confusing on this issue. It seems to
suggest that Feature reports can be sent on a HID device's Interrupt OUT
endpoint. This cannot be the case because the report type is not
encoded in transfers sent out the Interrput OUT endpoint. If Feature 
reports were sent on the Interrupt OUT endpint, they would be 
indistinguishable from Output reports in the case where Report IDs were 
not used.

Further, Windows and Mac OS X do not send Feature reports out the 
interrupt OUT Endpoint. They will only go out the Control Endpoint.

In addition, many devices simply do not hande Feature reports sent out 
the Interrupt OUT endpoint.

Reported-by: simon@mungewell.org
Signed-off-by: Alan Ott <alan@signal11.us>
---
  drivers/hid/usbhid/hid-core.c |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index b729c02..b0ccc42 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -807,7 +807,7 @@ static int usbhid_output_raw_report(struct 
hid_device *hid, __u8 *buf, size_t co
  	struct usb_host_interface *interface = intf->cur_altsetting;
  	int ret;
  -	if (usbhid->urbout) {
+	if (usbhid->urbout && report_type != HID_FEATURE_REPORT) {
  		int actual_length;
  		int skipped_report_id = 0;
  		if (buf[0] == 0x0) {
-- 
1.7.0.4