Re: [PATCH 1/2 v4]Update broken web addresses in arch directory.

["Justin P. Mattock" <justinmattock@gmail.com>]

On 10/01/2010 05:47 AM, Finn Thain wrote:


man what a pain.. I want this fuc*ing sh*t out of here..(tired of web 
addresses)oh-well the learning process of development.. Ill resend with 
the fixes.

>
> On Thu, 30 Sep 2010, Justin P. Mattock wrote:
>
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -647,7 +647,7 @@ config ARCH_S3C2410
>>   	select HAVE_S3C2410_I2C
>>   	help
>>   	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
>> -	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
>> +	  BAST (<http://www.simtec.co.uk/products/EB110ATX/>), the IPAQ 1940 or
>
> This is not the same board, and not the same CPU.
>
> The old URL is not archived anywhere that I can see. I guess you could
> change this paragraph to read something like, "...such as the Simtec
> Electronics BAST (EB110ITX), the IPAQ 1940 or..." if you want to.
>
>
>>   	the Samsung SMDK2410 development board (and derivatives).
>>
>>   	  Note, the S3C2416 and the S3C2450 are so close that they even share
>
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 939bccd..c0bcfb8 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -105,7 +105,7 @@ config MACH_ONEARM
>>   	bool "Ajeco 1ARM Single Board Computer"
>>   	help
>>   	  Select this if you are using Ajeco's 1ARM Single Board Computer.
>> -	<http://www.ajeco.fi/products.htm>
>> +	<http://www.ajeco.fi/index.php?language=fin>
>
> Please use http://www.ajeco.fi/
>
>
>>
>>   config ARCH_AT91RM9200DK
>>   	bool "Atmel AT91RM9200-DK Development board"
>
>> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
>> index a0a2928..c1a68af 100644
>> --- a/arch/arm/mm/Kconfig
>> +++ b/arch/arm/mm/Kconfig
>> @@ -314,7 +314,7 @@ config CPU_SA110
>>   	  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
>>   	  is available at five speeds ranging from 100 MHz to 233 MHz.
>>   	  More information is available at
>> -	<http://developer.intel.com/design/strong/sa110.htm>.
>> +	<http://www.renan.org/ARM/doc/sa110.pdf>.
>
> This is in the web archive. Also, the original link is not the datasheet.
>
>
>>
>>   	Say Y if you want support for the SA-110 processor.
>>   	  Otherwise, say N.
>> diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
>> index 1407597..25d03fa 100644
>> --- a/arch/arm/mm/proc-xscale.S
>> +++ b/arch/arm/mm/proc-xscale.S
>> @@ -418,7 +418,7 @@ ENTRY(xscale_cache_fns)
>>    *
>>    * See erratum #25 of "Intel 80200 Processor Specification Update",
>>    * revision January 22, 2003, available at:
>> - *     http://www.intel.com/design/iio/specupdt/273415.htm
>> + *     http://www.intel.com/design/support/faq/io_processors/iq80310_chipset.htm
>
> There were no errata at your URL that I could see. Also the old URL with
> errata are in the web archive.
>
>
>>    */
>>   ENTRY(xscale_80200_A0_A1_cache_fns)
>>   	.long	xscale_flush_kern_cache_all
>
>>    * Copyright (c) 2008 Simtec Electronics
>> - *	http://armlinux.simnte.co.uk/
>> + *	http://armlinux.simtec.co.uk/	
>>    *	Ben Dooks<ben@simtec.co.uk>
>>    *
>>    * S3C ADC driver information
>> diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
>> index f515727..787dcba 100644
>> --- a/arch/avr32/Kconfig
>> +++ b/arch/avr32/Kconfig
>> @@ -145,7 +145,7 @@ config BOARD_HAMMERHEAD
>>   	  will cover even the most exceptional need of memory bandwidth. Together with the onboard
>>   	  video decoder the board is ready for video processing.
>>
>> -	  For more information see: http://www.miromico.com/hammerhead
>> +	  For more information see: http://www.hammerhead.ch/index.php/getting-started.html
>
> I think this probably is the same page:
>
> http://www.miromico.ch/index.php/hammerhead.html
>
>
>>
>>   config BOARD_FAVR_32
>>   	bool "Favr-32 LCD-board"
>
>
>> diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
>> index 6e2ecff..8de966a 100644
>> --- a/arch/h8300/Kconfig.cpu
>> +++ b/arch/h8300/Kconfig.cpu
>> @@ -49,15 +49,15 @@ config H8S_EDOSK2674
>>   	help
>>   	  Renesas EDOSK-2674 Evaluation Board Support
>>   	  More Information.
>> -	<http://www.azpower.com/H8-uClinux/index.html>
>
> This page is in the web archive archive, and there isn't really any
> substitute that I can see, so keep this link.
>
>
>> - 	<http://www.eu.renesas.com/tools/edk/support/edosk2674.html>
>> +	<http://h8-uclinux.sourceforge.net/>
>> + 	<http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
>>
>
>> diff --git a/arch/h8300/README b/arch/h8300/README
>> index 2fd6f6d..7dac451 100644
>> --- a/arch/h8300/README
>> +++ b/arch/h8300/README
>> @@ -14,11 +14,11 @@ H8/300H and H8S
>
>>   4.EDOSK2674
>> -  see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
>> -      http://www.azpower.com/H8-uClinux/
>> +  see http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
>> +      http://h8-uclinux.sourceforge.net/
>
> Same here.
>
> Also, the renesas URL that you used above wouldn't hurt.
>
>
>>
>>   * Toolchain Version
>>   gcc-3.1 or higher and patch
>
>> diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c
>> index 8f06408..234d9ee 100644
>> --- a/arch/m68k/mac/macboing.c
>> +++ b/arch/m68k/mac/macboing.c
>> @@ -114,7 +114,8 @@ static void mac_init_asc( void )
>>   			 *   16-bit I/O functionality.  The PowerBook 500 series computers
>>   			 *   support 16-bit stereo output, but only mono input."
>>   			 *
>> -			 *   http://til.info.apple.com/techinfo.nsf/artnum/n16405
>> +			 *   "Technical Information Library (TIL) article number 16405".
>
>
> No need for the quote marks.
>
>
>> +			 *   http://support.apple.com/kb/TA32601
>>   			 *
>>   			 * --David Kilzer
>>   			 */
>
>
> Thanks.
>
> Finn
>