From: Tejun Heo <tj@kernel.org>
To: Neil Brown <neilb@suse.de>, lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH v2.6.36-rc7] md: fix and update workqueue usage
Date: Fri, 15 Oct 2010 15:36:08 +0200 [thread overview]
Message-ID: <4CB858C8.30203@kernel.org> (raw)
Workqueue usage in md has two problems.
* Flush can be used during or depended upon by memory reclaim, but md
uses the system workqueue for flush_work which may lead to deadlock.
* md depends on flush_scheduled_work() to achieve exclusion against
completion of removal of previous instances. flush_scheduled_work()
may incur unexpected amount of delay and is scheduled to be removed.
This patch adds two workqueues to md - md_wq and md_misc_wq. The
former is guaranteed to make forward progress under memory pressure
and serves flush_work. The latter serves as the flush domain for
other works.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
Neil, this patch doesn't conflict with the pending barrier changes in
block tree and should be safe to apply to md tree.
Thanks.
drivers/md/md.c | 64 +++++++++++++++++++++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 21 deletions(-)
Index: work/drivers/md/md.c
===================================================================
--- work.orig/drivers/md/md.c
+++ work/drivers/md/md.c
@@ -68,6 +68,8 @@ static DEFINE_SPINLOCK(pers_lock);
static void md_print_devices(void);
static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
+static struct workqueue_struct *md_wq;
+static struct workqueue_struct *md_misc_wq;
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
@@ -299,7 +301,7 @@ static void md_end_flush(struct bio *bio
if (atomic_dec_and_test(&mddev->flush_pending)) {
/* The pre-request flush has finished */
- schedule_work(&mddev->flush_work);
+ queue_work(md_wq, &mddev->flush_work);
}
bio_put(bio);
}
@@ -368,7 +370,7 @@ void md_flush_request(mddev_t *mddev, st
submit_flushes(mddev);
if (atomic_dec_and_test(&mddev->flush_pending))
- schedule_work(&mddev->flush_work);
+ queue_work(md_wq, &mddev->flush_work);
}
EXPORT_SYMBOL(md_flush_request);
@@ -435,14 +437,13 @@ static void mddev_put(mddev_t *mddev)
* so destroy it */
list_del(&mddev->all_mddevs);
if (mddev->gendisk) {
- /* we did a probe so need to clean up.
- * Call schedule_work inside the spinlock
- * so that flush_scheduled_work() after
- * mddev_find will succeed in waiting for the
- * work to be done.
+ /* We did a probe so need to clean up. Call
+ * queue_work inside the spinlock so that
+ * flush_workqueue() after mddev_find will
+ * succeed in waiting for the work to be done.
*/
INIT_WORK(&mddev->del_work, mddev_delayed_delete);
- schedule_work(&mddev->del_work);
+ queue_work(md_misc_wq, &mddev->del_work);
} else
kfree(mddev);
}
@@ -1849,7 +1850,7 @@ static void unbind_rdev_from_array(mdk_r
synchronize_rcu();
INIT_WORK(&rdev->del_work, md_delayed_delete);
kobject_get(&rdev->kobj);
- schedule_work(&rdev->del_work);
+ queue_work(md_misc_wq, &rdev->del_work);
}
/*
@@ -4191,10 +4192,10 @@ static int md_alloc(dev_t dev, char *nam
shift = partitioned ? MdpMinorShift : 0;
unit = MINOR(mddev->unit) >> shift;
- /* wait for any previous instance if this device
- * to be completed removed (mddev_delayed_delete).
+ /* wait for any previous instance if this device to be
+ * completely removed (mddev_delayed_delete).
*/
- flush_scheduled_work();
+ flush_workqueue(md_misc_wq);
mutex_lock(&disks_mutex);
error = -EEXIST;
@@ -5891,7 +5892,7 @@ static int md_open(struct block_device *
*/
mddev_put(mddev);
/* Wait until bdev->bd_disk is definitely gone */
- flush_scheduled_work();
+ flush_workqueue(md_misc_wq);
/* Then retry the open from the top */
unlock_kernel();
return -ERESTARTSYS;
@@ -6051,7 +6052,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
if (mddev->event_work.func)
- schedule_work(&mddev->event_work);
+ queue_work(md_misc_wq, &mddev->event_work);
md_new_event_inintr(mddev);
}
@@ -7211,12 +7212,23 @@ static void md_geninit(void)
static int __init md_init(void)
{
- if (register_blkdev(MD_MAJOR, "md"))
- return -1;
- if ((mdp_major=register_blkdev(0, "mdp"))<=0) {
- unregister_blkdev(MD_MAJOR, "md");
- return -1;
- }
+ int ret = -ENOMEM;
+
+ md_wq = alloc_workqueue("md", WQ_RESCUER, 0);
+ if (!md_wq)
+ goto err_wq;
+
+ md_misc_wq = alloc_workqueue("md_misc", 0, 0);
+ if (!md_misc_wq)
+ goto err_misc_wq;
+
+ if ((ret = register_blkdev(MD_MAJOR, "md")) < 0)
+ goto err_md;
+
+ if ((ret = register_blkdev(0, "mdp")) < 0)
+ goto err_mdp;
+ mdp_major = ret;
+
blk_register_region(MKDEV(MD_MAJOR, 0), 1UL<<MINORBITS, THIS_MODULE,
md_probe, NULL, NULL);
blk_register_region(MKDEV(mdp_major, 0), 1UL<<MINORBITS, THIS_MODULE,
@@ -7227,8 +7239,16 @@ static int __init md_init(void)
md_geninit();
return 0;
-}
+err_mdp:
+ unregister_blkdev(MD_MAJOR, "md");
+err_md:
+ destroy_workqueue(md_misc_wq);
+err_misc_wq:
+ destroy_workqueue(md_wq);
+err_wq:
+ return ret;
+}
#ifndef MODULE
@@ -7315,6 +7335,8 @@ static __exit void md_exit(void)
export_array(mddev);
mddev->hold_active = 0;
}
+ destroy_workqueue(md_misc_wq);
+ destroy_workqueue(md_wq);
}
subsys_initcall(md_init);
next reply other threads:[~2010-10-15 13:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-15 13:36 Tejun Heo [this message]
2010-10-29 4:13 ` Neil Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CB858C8.30203@kernel.org \
--to=tj@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome