RE: [PATCH] Thermal: Fix to use read critical temperature when required

["R, Durgadoss" <durgadoss.r@intel.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 2886 bytes --]

> -----Original Message-----
> From: Zhang, Rui
> Sent: Friday, February 01, 2013 11:14 AM
> To: Amit Daniel Kachhap
> Cc: linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org; R, Durgadoss
> Subject: Re: [PATCH] Thermal: Fix to use read critical temperature when
> required
> 
> On Tue, 2013-01-08 at 16:18 -0800, Amit Daniel Kachhap wrote:
> > This patch modifies the code to use get_crit_temp instead of
> > the normal get_trip_temp when critical threshold point is crossed
> > or queried about.
> >
> 
> is there any problem in the current code?
> 
> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> > ---
> >  drivers/thermal/thermal_sys.c |   15 +++++++++++++--
> >  1 file changed, 13 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
> > index ecdfc7d..0dc6403 100644
> > --- a/drivers/thermal/thermal_sys.c
> > +++ b/drivers/thermal/thermal_sys.c
> > @@ -345,7 +345,10 @@ static void handle_critical_trips(struct
> thermal_zone_device *tz,
> >  {
> >  	long trip_temp;
> >
> > -	tz->ops->get_trip_temp(tz, trip, &trip_temp);
> > +	if (tz->ops->get_crit_temp)
> > +		tz->ops->get_crit_temp(tz, &trip_temp);
> > +	else
> > +		tz->ops->get_trip_temp(tz, trip, &trip_temp);
> >
> handle_critical_trips() can handle both active and hot trip points.
> this change will break HOT trip point.
> 
> >  	/* If we have not crossed the trip_temp, we do not care. */
> >  	if (tz->temperature < trip_temp)
> > @@ -550,6 +553,7 @@ trip_point_temp_show(struct device *dev, struct
> device_attribute *attr,
> >  	struct thermal_zone_device *tz = to_thermal_zone(dev);
> >  	int trip, ret;
> >  	long temperature;
> > +	enum thermal_trip_type type;
> >
> >  	if (!tz->ops->get_trip_temp)
> >  		return -EPERM;
> > @@ -557,7 +561,14 @@ trip_point_temp_show(struct device *dev, struct
> device_attribute *attr,
> >  	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
> >  		return -EINVAL;
> >
> > -	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
> > +	ret = tz->ops->get_trip_type(tz, trip, &type);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (type == THERMAL_TRIP_CRITICAL && tz->ops->get_crit_temp)
> > +		ret = tz->ops->get_crit_temp(tz, &temperature);
> > +	else
> > +		ret = tz->ops->get_trip_temp(tz, trip, &temperature);
> >
> 
> what's the benefit of using .get_crit_temp() instead of .get_trip_temp()
> for CRITICAL trip points here?
> .get_trip_point can also get the critical trip point temperature.
> 
> instead, I think we could remove .get_crit_temp callback.

I agree with you Rui here :-)

> for hwmon sysfs, we just need to use get_trip_type to find the critical
> trip point.

Yes, this should work.

Thanks,
Durga
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥