Re: [PATCH v2 1/4] gpio/aspeed: Fix incorrect number of banks

[Vijay Khemka <vijaykhemka@fb.com>]

On 9/4/19, 6:17 PM, "Linux-aspeed on behalf of Rashmica Gupta" <linux-aspeed-bounces+vijaykhemka=fb.com@lists.ozlabs.org on behalf of rashmica.g@gmail.com> wrote:

    The current calculation for the number of GPIO banks is only correct if
    the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
    currently say there are 0 banks, which is incorrect).
    
    Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
    
    Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
    ---
     drivers/gpio/gpio-aspeed.c | 2 +-
     1 file changed, 1 insertion(+), 1 deletion(-)
    
    diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
    index 9defe25d4721..b83e23aecd18 100644
    --- a/drivers/gpio/gpio-aspeed.c
    +++ b/drivers/gpio/gpio-aspeed.c
    @@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
     	gpio->chip.base = -1;
     
     	/* Allocate a cache of the output registers */
    -	banks = gpio->config->nr_gpios >> 5;
    +	banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
Good catch
     	gpio->dcache = devm_kcalloc(&pdev->dev,
     				    banks, sizeof(u32), GFP_KERNEL);
     	if (!gpio->dcache)
    -- 
    2.20.1