From: "Jan Beulich" <JBeulich@novell.com>
To: <mingo@elte.hu>, <tglx@linutronix.de>, <hpa@zytor.com>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: PCI config space accessor functions should not ignore the segment argument
Date: Tue, 19 Jul 2011 12:51:18 +0100 [thread overview]
Message-ID: <4E258BD6020000780004E3BE@nat28.tlf.novell.com> (raw)
Without this change, the majority of the raw PCI config space access
functions silently ignore a non-zero segment argument, which is
certainly wrong.
Apart from pci_direct_conf1, all other non-MMCFG access methods get
used only for non-extended accesses (i.e. assigned to raw_pci_ops
only). Consequently, with the way raw_pci_{read,write}() work, it would
be a coding error to call these functions with a non-zero segment (with
the current call flow this cannot happen afaict).
The access method 1 accessor, as it can be used for extended accesses
(on AMD systems) instead gets added checks for the passed in segment to
be zero (returning an error just like out of range values of the other
arguments would cause).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
---
arch/x86/pci/ce4100.c | 4 ++++
arch/x86/pci/direct.c | 6 ++++--
arch/x86/pci/numaq_32.c | 2 ++
arch/x86/pci/olpc.c | 4 ++++
arch/x86/pci/pcbios.c | 2 ++
5 files changed, 16 insertions(+), 2 deletions(-)
--- 3.0-rc7/arch/x86/pci/ce4100.c
+++ 3.0-rc7-x86-pci-access-seg/arch/x86/pci/ce4100.c
@@ -257,6 +257,8 @@ static int ce4100_conf_read(unsigned int
{
int i;
+ BUG_ON(seg);
+
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
@@ -282,6 +284,8 @@ static int ce4100_conf_write(unsigned in
{
int i;
+ BUG_ON(seg);
+
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
--- 3.0-rc7/arch/x86/pci/direct.c
+++ 3.0-rc7-x86-pci-access-seg/arch/x86/pci/direct.c
@@ -22,7 +22,7 @@ static int pci_conf1_read(unsigned int s
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
@@ -53,7 +53,7 @@ static int pci_conf1_write(unsigned int
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -97,6 +97,7 @@ static int pci_conf2_read(unsigned int s
unsigned long flags;
int dev, fn;
+ BUG_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
@@ -138,6 +139,7 @@ static int pci_conf2_write(unsigned int
unsigned long flags;
int dev, fn;
+ BUG_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
--- 3.0-rc7/arch/x86/pci/numaq_32.c
+++ 3.0-rc7-x86-pci-access-seg/arch/x86/pci/numaq_32.c
@@ -34,6 +34,7 @@ static int pci_conf1_mq_read(unsigned in
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ BUG_ON(seg);
if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -73,6 +74,7 @@ static int pci_conf1_mq_write(unsigned i
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ BUG_ON(seg);
if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
--- 3.0-rc7/arch/x86/pci/olpc.c
+++ 3.0-rc7-x86-pci-access-seg/arch/x86/pci/olpc.c
@@ -206,6 +206,8 @@ static int pci_olpc_read(unsigned int se
{
uint32_t *addr;
+ BUG_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
@@ -264,6 +266,8 @@ static int pci_olpc_read(unsigned int se
static int pci_olpc_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, uint32_t value)
{
+ BUG_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
--- 3.0-rc7/arch/x86/pci/pcbios.c
+++ 3.0-rc7-x86-pci-access-seg/arch/x86/pci/pcbios.c
@@ -181,6 +181,7 @@ static int pci_bios_read(unsigned int se
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ BUG_ON(seg);
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -247,6 +248,7 @@ static int pci_bios_write(unsigned int s
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ BUG_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
next reply other threads:[~2011-07-19 11:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-19 11:51 Jan Beulich [this message]
2011-07-21 7:10 ` Ingo Molnar
2011-07-21 7:37 ` Jan Beulich
2011-07-21 9:05 ` Ingo Molnar
2011-07-21 19:59 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E258BD6020000780004E3BE@nat28.tlf.novell.com \
--to=jbeulich@novell.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®