From: Yinghai Lu <yinghai.lu@oracle.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/8] pci: Calculate right add_size
Date: Sat, 15 Oct 2011 18:31:59 -0700 [thread overview]
Message-ID: <4E9A340F.1070502@oracle.com> (raw)
In-Reply-To: <4E9A3092.4080309@oracle.com>
During debug one SRIOV enabled hotplug, found add_size is not passed properly.
the device have devices under two level bridges..
+-[0000:80]-+-00.0-[81-8f]--
| +-01.0-[90-9f]--
| +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device
| | \-03.0-[a3]--+-00.0 Oracle Corporation Device
so later parent bridge will not try to add big range.
[ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff]
[ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref]
[ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff]
[ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref]
[ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff]
[ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref]
[ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000)
[ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff]
[ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000)
[ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff]
it turns out We did not calculate size1 properly.
static resource_size_t calculate_memsize(resource_size_t size,
resource_size_t min_size,
resource_size_t size1,
resource_size_t old_size,
resource_size_t align)
{
if (size < min_size)
size = min_size;
if (old_size == 1 )
old_size = 0;
if (size < old_size)
size = old_size;
size = ALIGN(size + size1, align);
return size;
}
We should not pass add_size with min_size in calculate_memsize.
that will make add_size not contribute final add_size.
Just pass add_size with size1 to calculate_memsize()
With this change, We should have chance to remove extra addon in pci_reassign_resource...
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -612,7 +616,7 @@ static void pbus_size_io(struct pci_bus
if (children_add_size > add_size)
add_size = children_add_size;
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
- calculate_iosize(size, min_size+add_size, size1,
+ calculate_iosize(size, min_size, add_size + size1,
resource_size(b_res), 4096);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
@@ -726,7 +734,7 @@ static int pbus_size_mem(struct pci_bus
if (children_add_size > add_size)
add_size = children_add_size;
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
- calculate_memsize(size, min_size+add_size, 0,
+ calculate_memsize(size, min_size, add_size,
resource_size(b_res), min_align);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
Index: linux-2.6/drivers/pci/setup-res.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-res.c
+++ linux-2.6/drivers/pci/setup-res.c
@@ -232,11 +232,12 @@ int pci_reassign_resource(struct pci_dev
return -EINVAL;
}
- new_size = resource_size(res) + addsize + min_align;
+ /* already aligned with min_align */
+ new_size = resource_size(res) + addsize;
ret = _pci_assign_resource(dev, resno, new_size, min_align);
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
- dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
+ dev_info(&dev->dev, "BAR %d: reassigned %pR\n", resno, res);
if (resno < PCI_BRIDGE_RESOURCES)
pci_update_resource(dev, resno);
}
next prev parent reply other threads:[~2011-10-16 1:32 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4E9A3092.4080309@oracle.com>
2011-10-16 1:31 ` [PATCH 1/8] pci: Make sriov work with hotplug removal Yinghai Lu
2011-10-17 17:16 ` Bjorn Helgaas
2011-10-17 18:08 ` Yinghai Lu
2011-10-17 22:12 ` Bjorn Helgaas
2011-10-17 22:24 ` Yinghai Lu
2011-10-18 16:49 ` Bjorn Helgaas
2011-10-18 17:02 ` Yinghai Lu
2011-10-25 12:34 ` Kenji Kaneshige
2011-10-25 15:52 ` Yinghai Lu
2011-11-11 21:00 ` [RESEND PATCH] PCI: Make sriov work with hotplug remove Yinghai Lu
2011-11-16 5:54 ` Kenji Kaneshige
2011-11-16 21:23 ` Yinghai Lu
2011-11-23 1:58 ` Kenji Kaneshige
2011-11-23 5:01 ` [PATCH -v4] " Yinghai Lu
2011-10-16 1:31 ` Yinghai Lu [this message]
2011-10-16 1:32 ` [PATCH 3/8] pci: Try to assign required+option size at first Yinghai Lu
2011-10-16 1:32 ` [PATCH 4/8] PCI: Using add_list in pcie hotplug path Yinghai Lu
2011-10-16 1:32 ` [PATCH 5/8] PCI: Make rescan bus could increase bridge resource size if needed Yinghai Lu
2011-10-16 1:32 ` [PATCH 6/8] PCI: Make pci_rescan_bus handle add_list Yinghai Lu
2011-10-16 1:32 ` [PATCH 7/8] PCI, sysfs: merge dev and bus cpuaffinity show handling Yinghai Lu
2011-10-16 1:32 ` [PATCH 8/8] PCI, sys: only create rescan under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2011-10-16 2:39 ` Greg KH
2011-10-16 5:34 ` Yinghai Lu
2011-10-16 15:55 ` Greg KH
2011-10-16 23:35 ` Yinghai Lu
2011-10-17 1:45 ` Greg KH
2011-10-17 18:27 ` [PATCH -v4 8_1/8] PCI, sys: Use device_type and attr_groups with pci dev Yinghai Lu
2011-10-17 18:38 ` Greg KH
2011-10-17 18:29 ` [PATCH -v4 8_2/8] PCI, sys: only create rescan under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2011-10-17 18:33 ` [PATCH -v4 8_3/8] PCI, sys: Use is_visable() with boot_vga attribute for pci_dev Yinghai Lu
2011-10-17 18:36 ` [PATCH 8/8] PCI, sys: only create rescan under /sys/.../pci/devices/... for pci bridges Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9A340F.1070502@oracle.com \
--to=yinghai.lu@oracle.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome