From: "Berck E. Nash" <flyboy@gmail.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Suresh Siddha <suresh.b.siddha@intel.com>
Subject: Re: x2apic boot failure on recent sandy bridge system
Date: Sun, 11 Dec 2011 15:05:16 -0700 [thread overview]
Message-ID: <4EE5291C.1030302@gmail.com> (raw)
In-Reply-To: <CAE9FiQXk7y_oafNZG-QF5h3kDUQ3J6SP3A=ezHBT2W4Njo=uxQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 507 bytes --]
On 12/11/2011 02:43 PM, Yinghai Lu wrote:
> On Sat, Dec 10, 2011 at 11:57 PM, Ingo Molnar <mingo@elte.hu> wrote:
>>
>> What we want is not a nox2apic option but a good fall-back
>> mechanism that is able to boot the system automatically and
>> safely, without the user having to tweak *anything* ...
>
> Attached -v4 should automatically switch to xapic mode.
>
> Berck,
> Can you please try -v4 patch on your setup when BIOS have x2apic enabled?
No problem: It does not work as expected. Log attached.
[-- Attachment #2: x2apic-enabled.log --]
[-- Type: text/plain, Size: 63946 bytes --]
[ 0.000000] Linux version 3.2.0-rc5 (berck@luna) (gcc version 4.6.2 (Debian 4.6.2-6) ) #2 SMP Fri Dec 9 18:16:28 MST 2011
[ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beee2000 (usable)
[ 0.000000] BIOS-e820: 00000000beee2000 - 00000000bef3a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef3a000 - 00000000bf607000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf607000 - 00000000bf608000 (usable)
[ 0.000000] BIOS-e820: 00000000bf608000 - 00000000bf609000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf609000 - 00000000bf613000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf613000 - 00000000bf638000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf638000 - 00000000bf67b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf67b000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023f800000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bef32068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bef398f8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000bef32150 077A6 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf60af80 00040
[ 0.000000] ACPI: APIC 00000000bef399f0 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bef39a88 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bef39c60 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bef39ca0 0006F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bef39d10 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023f800000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023f800000
[ 0.000000] NODE_DATA [000000023f7fb000 - 000000023f7fffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000beee2
[ 0.000000] 0: 0x000bf607 -> 0x000bf608
[ 0.000000] 0: 0x000bf67b -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x0023f800
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88023f400000 s70976 r8192 d23232 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058767
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175908k/9428992k available (3610k kernel code, 1065004k absent, 188080k reserved, 1567k data, 672k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3392.136 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.27 BogoMIPS (lpj=3392136)
[ 0.010596] pid_max: default: 32768 minimum: 301
[ 0.015476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023749] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031306] Mount-cache hash table entries: 256
[ 0.035902] CPU: Physical Processor ID: 0
[ 0.039908] CPU: Processor Core ID: 0
[ 0.043566] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.043566] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.056571] mce: CPU supports 9 MCE banks
[ 0.060578] CPU0: Thermal monitoring enabled (TM1)
[ 0.065362] using mwait in idle threads.
[ 0.069341] Freeing SMP alternatives: 20k freed
[ 0.073867] ACPI: Core revision 20110623
[ 0.085701] x2apic not enabled, IRQ remapping init failed
[ 0.091507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107464] CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
[ 0.215404] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.222922] PEBS disabled due to CPU errata.
[ 0.227182] ... version: 3
[ 0.231184] ... bit width: 48
[ 0.235269] ... generic registers: 4
[ 0.239263] ... value mask: 0000ffffffffffff
[ 0.244561] ... max period: 000000007fffffff
[ 0.249858] ... fixed-purpose events: 3
[ 0.253849] ... event mask: 000000070000000f
[ 0.259210] Booting Node 0, Processors #1
[ 0.354115] #2
[ 0.446836] #3
[ 0.539558] #4
[ 0.632319] #5
[ 0.725044] #6
[ 0.817770] #7 Ok.
[ 0.910387] Brought up 8 CPUs
[ 0.913349] Total of 8 processors activated (54270.27 BogoMIPS).
[ 0.924156] devtmpfs: initialized
[ 0.927560] NET: Registered protocol family 16
[ 0.932036] ACPI: bus type pci registered
[ 0.936042] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.945316] PCI: not using MMCONFIG
[ 0.948798] PCI: Using configuration type 1 for base access
[ 0.954706] bio: create slab <bio-0> at 0
[ 0.958746] ACPI: Added _OSI(Module Device)
[ 0.962919] ACPI: Added _OSI(Processor Device)
[ 0.967350] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.972034] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.978545] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.987537] ACPI: SSDT 00000000bf612898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.996015] ACPI: Dynamic OEM Table Load:
[ 1.000044] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.008342] ACPI: SSDT 00000000bf609d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 1.016753] ACPI: Dynamic OEM Table Load:
[ 1.020792] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 1.029588] ACPI: Interpreter enabled
[ 1.033237] ACPI: (supports S0 S5)
[ 1.036668] ACPI: Using IOAPIC for interrupt routing
[ 1.041631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.050941] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.073354] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.082047] HEST: Table not found.
[ 1.085445] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.094656] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.100944] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.107533] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.114124] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.121402] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 1.128687] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 1.135974] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ccdff])
[ 1.151621] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.158598] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 1.165580] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.172553] pci 0000:00:1c.7: PCI bridge to [bus 04-0d]
[ 1.179159] pci 0000:04:00.0: PCI bridge to [bus 05-0d]
[ 1.184762] pci 0000:05:01.0: PCI bridge to [bus 06-06]
[ 1.191501] pci 0000:05:04.0: PCI bridge to [bus 07-08]
[ 1.197426] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 1.203054] pci 0000:05:05.0: PCI bridge to [bus 09-09]
[ 1.210449] pci 0000:05:06.0: PCI bridge to [bus 0a-0a]
[ 1.216033] pci 0000:05:07.0: PCI bridge to [bus 0b-0b]
[ 1.221352] pci 0000:05:08.0: PCI bridge to [bus 0c-0c]
[ 1.226664] pci 0000:05:09.0: PCI bridge to [bus 0d-0d]
[ 1.232397] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.238160] pci0000:00: ACPI _OSC control (0x1c) granted
[ 1.245959] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.253214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.260463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.267533] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.274593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 1.282033] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 1.289473] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.296725] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 1.303994] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.312056] vgaarb: loaded
[ 1.314755] vgaarb: bridge control possible 0000:01:00.0
[ 1.320099] SCSI subsystem initialized
[ 1.323877] PCI: Using ACPI for IRQ routing
[ 1.337876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.344191] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.352014] Switching to clocksource hpet
[ 1.356060] pnp: PnP ACPI init
[ 1.359120] ACPI: bus type pnp registered
[ 1.363280] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 1.369878] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.376472] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.383066] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.389659] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 1.396307] system 00:02: [io 0x0290-0x029f] has been reserved
[ 1.402598] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 1.408850] system 00:0a: [io 0x0400-0x0453] has been reserved
[ 1.414757] system 00:0a: [io 0x0458-0x047f] has been reserved
[ 1.420657] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 1.426558] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 1.432462] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.439055] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 1.445994] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 1.452588] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 1.459227] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 1.465298] pnp: PnP ACPI: found 13 devices
[ 1.469475] ACPI: ACPI bus type pnp unregistered
[ 1.479903] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.485119] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 1.491196] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfb0fffff]
[ 1.497963] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.505683] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 1.510896] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.516975] pci 0000:00:1c.4: bridge window [mem 0xfb700000-0xfb7fffff]
[ 1.523745] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.528961] pci 0000:00:1c.6: bridge window [mem 0xfb600000-0xfb6fffff]
[ 1.535732] pci 0000:05:01.0: PCI bridge to [bus 06-06]
[ 1.540949] pci 0000:05:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
[ 1.547729] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 1.552942] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
[ 1.559021] pci 0000:07:00.0: bridge window [mem 0xfb300000-0xfb3fffff]
[ 1.565793] pci 0000:07:00.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 1.573517] pci 0000:05:04.0: PCI bridge to [bus 07-08]
[ 1.578727] pci 0000:05:04.0: bridge window [io 0xc000-0xcfff]
[ 1.584807] pci 0000:05:04.0: bridge window [mem 0xfb300000-0xfb3fffff]
[ 1.591581] pci 0000:05:04.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 1.599310] pci 0000:05:05.0: PCI bridge to [bus 09-09]
[ 1.604528] pci 0000:05:05.0: bridge window [mem 0xfb200000-0xfb2fffff]
[ 1.611310] pci 0000:05:06.0: PCI bridge to [bus 0a-0a]
[ 1.616519] pci 0000:05:06.0: bridge window [io 0xb000-0xbfff]
[ 1.622601] pci 0000:05:06.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
[ 1.630325] pci 0000:05:07.0: PCI bridge to [bus 0b-0b]
[ 1.635540] pci 0000:05:07.0: bridge window [io 0xa000-0xafff]
[ 1.641619] pci 0000:05:07.0: bridge window [mem 0xfb100000-0xfb1fffff]
[ 1.648399] pci 0000:05:08.0: PCI bridge to [bus 0c-0c]
[ 1.653625] pci 0000:05:09.0: PCI bridge to [bus 0d-0d]
[ 1.658855] pci 0000:04:00.0: PCI bridge to [bus 05-0d]
[ 1.664065] pci 0000:04:00.0: bridge window [io 0xa000-0xcfff]
[ 1.670145] pci 0000:04:00.0: bridge window [mem 0xfb100000-0xfb4fffff]
[ 1.676920] pci 0000:04:00.0: bridge window [mem 0xd0000000-0xd40fffff 64bit pref]
[ 1.684650] pci 0000:00:1c.7: PCI bridge to [bus 04-0d]
[ 1.689862] pci 0000:00:1c.7: bridge window [io 0xa000-0xcfff]
[ 1.695940] pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb5fffff]
[ 1.702705] pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd40fffff 64bit pref]
[ 1.710434] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.717125] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.723816] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.730505] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.737194] pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.743885] pci 0000:05:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.750573] pci 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.757262] pci 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.763956] pci 0000:05:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.770649] pci 0000:05:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.777337] pci 0000:05:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.784024] pci 0000:05:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.790713] pci 0000:05:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.797497] NET: Registered protocol family 2
[ 1.801942] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.809621] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.817908] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.824702] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.831294] TCP reno registered
[ 1.834436] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.840533] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.847113] NET: Registered protocol family 1
[ 2.097235] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.103654] Placing 64MB software IO TLB between ffff8800baee2000 - ffff8800beee2000
[ 2.111369] software IO TLB at phys 0xbaee2000 - 0xbeee2000
[ 2.117768] audit: initializing netlink socket (disabled)
[ 2.123153] type=2000 audit(1323550917.488:1): initialized
[ 2.147320] Btrfs loaded
[ 2.149857] msgmni has been set to 15968
[ 2.154126] NET: Registered protocol family 38
[ 2.158578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.165952] io scheduler noop registered
[ 2.169885] io scheduler cfq registered (default)
[ 2.176685] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.183624] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.190150] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.197089] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.203615] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 2.210552] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.217078] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 2.224016] pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 2.230957] pcieport 0000:05:01.0: Signaling PME through PCIe PME interrupt
[ 2.237893] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.244401] pcieport 0000:05:04.0: Signaling PME through PCIe PME interrupt
[ 2.251341] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 2.257848] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 2.264356] pci 0000:08:01.0: Signaling PME through PCIe PME interrupt
[ 2.270863] pcieport 0000:05:05.0: Signaling PME through PCIe PME interrupt
[ 2.277804] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 2.284309] pcieport 0000:05:06.0: Signaling PME through PCIe PME interrupt
[ 2.291251] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[ 2.297757] pcieport 0000:05:07.0: Signaling PME through PCIe PME interrupt
[ 2.304698] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[ 2.311204] pcieport 0000:05:08.0: Signaling PME through PCIe PME interrupt
[ 2.318142] pcieport 0000:05:09.0: Signaling PME through PCIe PME interrupt
[ 2.325119] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 2.331279] vesafb: scrolling: redraw
[ 2.334934] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.341089] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011800000, using 9024k, total 9024k
[ 2.433124] Console: switching to colour frame buffer device 240x75
[ 2.518826] fb0: VESA VGA frame buffer device
[ 2.523463] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.532050] ACPI: Power Button [PWRB]
[ 2.535918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.543682] ACPI: Power Button [PWRF]
[ 2.548246] ERST: Table is not found!
[ 2.552137] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.579283] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.606208] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.612194] Linux agpgart interface v0.103
[ 2.616618] aic7xxx 0000:08:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.833341] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 2.833342] <Adaptec 2940 Ultra2 SCSI adapter>
[ 2.833342] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 2.833343]
[ 2.855033] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.872831] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.881442] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 2.899980] scsi1 : ahci
[ 2.902683] scsi2 : ahci
[ 2.905377] scsi3 : ahci
[ 2.908072] scsi4 : ahci
[ 2.910769] scsi5 : ahci
[ 2.913465] scsi6 : ahci
[ 2.916207] ata1: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805100 irq 52
[ 2.923969] ata2: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805180 irq 52
[ 2.931727] ata3: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805200 irq 52
[ 2.939487] ata4: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805280 irq 52
[ 2.947249] ata5: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805300 irq 52
[ 2.955011] ata6: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805380 irq 52
[ 2.955026] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.955155] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.955157] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.955342] scsi7 : ahci
[ 2.955383] scsi8 : ahci
[ 2.955412] ata7: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710100 irq 53
[ 2.955414] ata8: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710180 irq 53
[ 2.955431] ahci 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.955589] ahci 0000:0b:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.955591] ahci 0000:0b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.955856] scsi9 : ahci
[ 2.955921] scsi10 : ahci
[ 2.955963] ata9: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110100 irq 54
[ 2.955969] ata10: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110180 irq 54
[ 2.956064] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.964172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.964176] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.964279] mousedev: PS/2 mouse device common for all mice
[ 2.964376] rtc_cmos 00:05: RTC can wake from S4
[ 2.964497] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.964545] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.075254] hpet1: lost 6 rtc interrupts
[ 3.075294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.075327] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.075361] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.258753] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.258789] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.258816] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.258843] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.258866] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.258902] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.264693] ata10: SATA link down (SStatus 0 SControl 330)
[ 3.264722] ata9: SATA link down (SStatus 0 SControl 330)
[ 3.286349] ata5.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 3.286373] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.286447] ata1.00: ATA-9: C300-CTFDDAC064MAG, 0006, max UDMA/100
[ 3.286448] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.286464] ata6.00: ATA-8: SAMSUNG HD403LJ, CT100-10, max UDMA7
[ 3.286465] ata6.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.486050] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[ 3.545087] ata3.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
[ 3.545088] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.545099] ata2.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
[ 3.545100] ata2.00: 72303840 sectors, multi 16: LBA48
[ 3.696400] ata5.00: configured for UDMA/100
[ 3.715558] ata8.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
[ 3.715559] ata8.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.715570] ata1.00: configured for UDMA/100
[ 3.715587] scsi: waiting for bus probes to complete ...
[ 3.798560] ata2.00: configured for UDMA/133
[ 3.798578] ata6.00: configured for UDMA/133
[ 3.798723] cpuidle: using governor ladder
[ 3.836635] ata3.00: configured for UDMA/133
[ 3.836845] cpuidle: using governor menu
[ 3.872878] TCP cubic registered
[ 3.872881] Initializing XFRM netlink socket
[ 3.925400] ata8.00: configured for UDMA/133
[ 3.943282] Refined TSC clocksource calibration: 3392.293 MHz.
[ 3.962633] NET: Registered protocol family 10
[ 3.962689] Switching to clocksource tsc
[ 3.999976] IPv6 over IPv4 tunneling driver
[ 4.001189] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2
[ 4.001193] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 4.001196] scsi target0:0:1: Beginning Domain Validation
[ 4.008216] scsi target0:0:1: wide asynchronous
[ 4.013331] scsi target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 4.017659] scsi target0:0:1: Domain Validation skipping write tests
[ 4.017660] scsi target0:0:1: Ending Domain Validation
[ 4.154146] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 4.154508] ata7.00: ATAPI: LITE-ON LTR-48246S, SS0E, max UDMA/33
[ 4.155073] ata7.00: configured for UDMA/33
[ 4.223618] NET: Registered protocol family 17
[ 4.242771] NET: Registered protocol family 15
[ 4.261643] Registering the dns_resolver key type
[ 4.281254] registered taskstats version 1
[ 4.306282] scsi: waiting for bus probes to complete ...
[ 7.342755] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 75.362808] rtc_cmos 00::s setting system clock to 2011-12-10 21:02:04 UTC (1323550924)
[ 7.362852] scsi 1:0:0:0: Direct-Access cATA C300-CTFDDAC064M 0006 PQ o0N0SI: 5
[ 7.362929] sd:i0:0:0: Attached scsi generic sg1 type 0
[ 7.363017] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 7.363034] sd 0:0:1:0: [sda] 17774160 512-byte logical blocks: (9.10 GB/8.47 GiB)
[ 7.363056] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.363066] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.363070] scsi 2:0:0:0: Direct-Access ATA WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5
[ 7.363119] sd 2:0:0:0: [sdc] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
[ 7.363138] sd 2:0:0:0: [sdc] Write Protect is off
[ 7.363149] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.363162] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 7.363228] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 7.363308] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.363325] sd 3:0:0:0: [sdd] Write Protect is off
[ 7.363329] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 7.363332] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.363937] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB00 PQ: 0 ANSI: 5
[ 7.364007] sdb: sdb1
[ 7.365042] sd 0:0:1:0: [sda] Write Protect is off
[ 7.366359] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.366360] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.366519] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 7.366596] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
[ 7.366634] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 7.366657] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 7.366689] sd 6:0:0:0: [sde] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 7.366780] sd 6:0:0:0: [sde] Write Protect is off
[ 7.366812] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.375567] sde: sde1
[ 7.378380] sda: sda1 sda2
[ 7.405721] sdd: sdd1
[ 7.409837] sdc: sdc1 sdc2
[ 7.637718] scsi 7:0:0:0: CD-ROM LITE-ON LTR-48246S SS0E PQ: 0 ANSI: 5
[ 8.116540] sr1: scsi3-mmc drive: 50x/48x writer cd/rw xa/form2 cdda tray
[ 8.116634] sr 7:0:0:0: Attached scsi generic sg6 type 5
[ 8.116693] scsi 8:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
[ 8.116763] sd 8:0:0:0: Attached scsi generic sg7 type 0
[ 8.116797] sd 8:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 8.116817] sd 8:0:0:0: [sdf] Write Protect is off
[ 8.116828] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.167440] sdf: sdf1
[ 8.321540] sd 6:0:0:0: [sde] Attached SCSI disk
[ 8.321582] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 8.321593] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 8.321607] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 8.321611] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 8.326436] sd 0:0:1:0: [sda] Attached SCSI disk
[ 8.466980] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.511139] VFS: Mounted root (ext4 filesystem) readonly on device 8:17.
[ 8.534635] devtmpfs: mounted
[ 8.553387] Freeing unused kernel memory: 672k freed
[ 8.732921] udevd[154]: starting version 175
[ 8.822243] wmi: Mapper loaded
[ 8.823388] usbcore: registered new interface driver usbfs
[ 8.823397] usbcore: registered new interface driver hub
[ 8.823419] usbcore: registered new device driver usb
[ 8.824046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.824065] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.824088] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 8.824092] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 8.824113] ehci_hcd 0000:00:1a.0: debug port 2
[ 8.827977] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb807000
[ 8.828491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.828514] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 8.828519] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 8.828645] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfb600000
[ 8.828664] xhci_hcd 0000:03:00.0: Failed to enable MSI-X
[ 8.828848] hub 2-0:1.0: USB hub found
[ 8.828854] hub 2-0:1.0: 2 ports detected
[ 8.828890] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 8.828893] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 8.828966] hub 3-0:1.0: USB hub found
[ 8.828973] hub 3-0:1.0: 2 ports detected
[ 8.829017] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.829034] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 8.829038] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
[ 8.829177] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfb400000
[ 8.829198] xhci_hcd 0000:06:00.0: Failed to enable MSI-X
[ 8.829388] hub 4-0:1.0: USB hub found
[ 8.829394] hub 4-0:1.0: 2 ports detected
[ 8.829426] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 8.829428] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 8.829478] hub 5-0:1.0: USB hub found
[ 8.829485] hub 5-0:1.0: 2 ports detected
[ 8.829528] xhci_hcd 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.829541] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 8.829544] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
[ 8.829684] xhci_hcd 0000:09:00.0: irq 16, io mem 0xfb200000
[ 8.829703] xhci_hcd 0000:09:00.0: Failed to enable MSI-X
[ 8.829897] hub 6-0:1.0: USB hub found
[ 8.829904] hub 6-0:1.0: 2 ports detected
[ 8.829939] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 8.829942] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 7
[ 8.830012] hub 7-0:1.0: USB hub found
[ 8.830018] hub 7-0:1.0: 2 ports detected
[ 8.833584] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.833597] r8169 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.837659] FDC 0 is a post-1991 82077
[ 8.837755] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 8.837841] hub 1-0:1.0: USB hub found
[ 8.837844] hub 1-0:1.0: 2 ports detected
[ 8.837879] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.750978] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 9.751002] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 9.751033] ehci_hcd 0000:00:1d.0: debug port 2
[ 9.751236] r8169 0000:0a:00.0: eth0: RTL8168e/8111e at 0xffffc90000c78000, 00:25:22:9f:75:32, XID 0c200000 IRQ 58
[ 9.751238] r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.754903] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb806000
[ 9.764079] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 9.764158] hub 8-0:1.0: USB hub found
[ 9.764161] hub 8-0:1.0: 2 ports detected
[ 9.764244] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.764323] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.988441] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 10.102567] hub 1-1:1.0: USB hub found
[ 10.102599] hub 1-1:1.0: 6 ports detected
[ 10.204843] usb 8-1: new high-speed USB device number 2 using ehci_hcd
[ 10.358061] hub 8-1:1.0: USB hub found
[ 10.394517] hub 8-1:1.0: 8 ports detected
[ 10.668343] Adding 4194300k swap on /dev/sdc1. Priority:-1 extents:1 across:4194300k
[ 10.690592] usb 8-1.1: new low-speed USB device number 3 using ehci_hcd
[ 10.755532] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 10.882451] EXT4-fs (sdb1): re-mounted. Opts: discard
[ 10.904964] usb 8-1.2: new high-speed USB device number 4 using ehci_hcd
[ 11.011408] hub 8-1.2:1.0: USB hub found
[ 11.031475] hub 8-1.2:1.0: 3 ports detected
[ 11.115347] usb 8-1.7: new high-speed USB device number 5 using ehci_hcd
[ 11.278551] w83627ehf: Found NCT6776F chip at 0x290
[ 11.283153] fuse init (API version 7.17)
[ 11.295526] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.1/8-1.1:1.0/input/input2
[ 11.295602] generic-usb 0003:045E:001E.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.0-1.1/input0
[ 11.295612] usbcore: registered new interface driver usbhid
[ 11.295613] usbhid: USB HID core driver
[ 11.315746] usb 8-1.8: new low-speed USB device number 6 using ehci_hcd
[ 11.335619] i2c /dev entries driver
[ 11.338995] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.409334] input: USBPS2 as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.8/8-1.8:1.0/input/input3
[ 11.409410] generic-usb 0003:0D3D:0001.0002: input,hidraw1: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-1.8/input0
[ 11.413724] input: USBPS2 as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.8/8-1.8:1.1/input/input4
[ 11.413949] generic-usb 0003:0D3D:0001.0003: input,hidraw2: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-1.8/input1
[ 11.465430] ipmi message handler version 39.2
[ 11.476319] usb 8-1.2.2: new low-speed USB device number 7 using ehci_hcd
[ 11.564770] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.2/8-1.2.2/8-1.2.2:1.0/input/input5
[ 11.564849] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.0-1.2.2/input0
[ 11.567692] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.2/8-1.2.2/8-1.2.2:1.1/input/input6
[ 11.567764] apple 0003:05AC:0220.0005: input,hidraw4: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.0-1.2.2/input1
[ 14.819506] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 14.911581] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.951529] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 14.984400] REISERFS (device sda1): using ordered data mode
[ 15.007351] reiserfs: using flush barriers
[ 15.031223] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 15.064626] REISERFS (device sda1): checking transaction log (sda1)
[ 15.120781] REISERFS (device sda1): Using r5 hash to sort names
[ 15.222910] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.529837] r8169 0000:0a:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 15.547095] r8169 0000:0a:00.0: eth0: link down
[ 15.547100] r8169 0000:0a:00.0: eth0: link down
[ 15.547406] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.979110] r8169 0000:0a:00.0: eth0: link up
[ 18.015709] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.147049] RPC: Registered named UNIX socket transport module.
[ 19.189908] RPC: Registered udp transport module.
[ 19.231910] RPC: Registered tcp transport module.
[ 19.273554] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.328020] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.465495] tun: Universal TUN/TAP device driver, 1.6
[ 19.492962] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 19.524164] ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 19.535119] device eth0 entered promiscuous mode
[ 19.538001] device tap0 entered promiscuous mode
[ 19.538867] br0: port 1(eth0) entering forwarding state
[ 19.538869] br0: port 1(eth0) entering forwarding state
[ 24.775323] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 24.799166] NFSD: starting 90-second grace period
[ 24.970507] [drm] Initialized drm 1.1.0 20060810
[ 24.980078] MXM: GUID detected in BIOS
[ 24.983836] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.991494] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[ 24.999344] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 25.007374] Console: switching to colour dummy device 80x25
[ 25.015078] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 25.127351] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 25.133256] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 25.138373] [drm] nouveau 0000:01:00.0: Bios version 60.84.51.00
[ 25.144365] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 25.150178] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 25.157984] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 25.164834] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 25.171689] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 25.178558] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 25.185410] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 25.192264] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 25.199374] [drm] nouveau 0000:01:00.0: 0: 0x00002030: type 0x30 idx 0 tag 0x08
[ 25.206834] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07
[ 25.214296] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 25.221758] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 25.229221] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 25.236683] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC1BE
[ 25.267522] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC50B
[ 25.292007] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCF58
[ 25.299668] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD04A
[ 25.308398] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD27D
[ 25.316040] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD2E2
[ 25.343487] [drm] nouveau 0000:01:00.0: 0xD2E2: Condition still not met after 20ms, skipping following opcodes
[ 25.372921] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 25.379598] [drm] nouveau 0000:01:00.0: 0: core 580MHz shader 1508MHz memory 800MHz fanspeed 100%
[ 25.388473] [drm] nouveau 0000:01:00.0: c: core 540MHz shader 1512MHz memory 702MHz voltage 1320mV
[ 25.400006] [TTM] Zone kernel: Available graphics memory: 4088300 kiB.
[ 25.406608] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 25.413197] [TTM] Initializing pool allocator.
[ 25.417653] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 25.423316] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.431589] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 25.447822] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 25.453566] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 25.475572] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 25.482233] [drm] No driver support for vblank timestamp query.
[ 25.488149] parse error at position 4 in video mode 'efifb'
[ 25.493710] parse error at position 4 in video mode 'efifb'
[ 25.718481] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x320000, bo ffff88023504a000
[ 25.727092] fbcon: nouveaufb (fb0) is primary device
[ 25.732118] Console: switching to colour frame buffer device 160x64
[ 25.738373] fb0: nouveaufb frame buffer device
[ 25.742807] drm: registered panic notifier
[ 25.746946] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Debian GNU/Linux wheezy/sid luna ttyS0
luna login: [ 34.525172] br0: port 1(eth0) entering forwarding state
[ 42.205032] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=0
[ 42.212123] EXT4-fs (sdc2): re-mounted. Opts: commit=0
[ 42.218150] EXT4-fs (sdd1): re-mounted. Opts: commit=0
[ 42.224391] EXT4-fs (sdf1): re-mounted. Opts: commit=0
[ 3983.686577] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002e178 Put 0x002002e45c IbGet 0x00000caf IbPut 0x00000cc2 State 0x80002054 (err: INVALID_CMD) Push 0x00406040
[64195.493018] nfsd: last server has exited, flushing export cache
[64199.669682] br0: port 1(eth0) entering forwarding state
[64213.384189] device tap0 left promiscuous mode
[64213.388884] br0: port 2(tap0) entering disabled state
[64213.427643] device eth0 left promiscuous mode
[64213.432348] br0: port 1(eth0) entering disabled state
[64216.081808] EXT4-fs (sdb1): re-mounted. Opts: (null)
[64218.311281] kvm: exiting hardware virtualization
[64218.316392] sd 8:0:0:0: [sdf] Synchronizing SCSI cache
[64218.321893] sd 6:0:0:0: [sde] Synchronizing SCSI cache
[64218.327800] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[64218.333426] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[64218.339230] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[64219.160405] sd 0:0:1:0: [sda] Synchronizing SCSI cache
[64219.166745] xhci_hcd 0000:09:00.0: PCI INT A disabled
[64219.172156] xhci_hcd 0000:06:00.0: PCI INT A disabled
[64219.177669] xhci_hcd 0000:03:00.0: PCI INT A disabled
[64219.182903] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[64219.188105] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 0.000000] Linux version 3.2.0-rc5+ (berck@luna) (gcc version 4.6.2 (Debian 4.6.2-6) ) #3 SMP Sun Dec 11 14:52:43 MST 2011
[ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beee2000 (usable)
[ 0.000000] BIOS-e820: 00000000beee2000 - 00000000bef3a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef3a000 - 00000000bf607000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf607000 - 00000000bf608000 (usable)
[ 0.000000] BIOS-e820: 00000000bf608000 - 00000000bf609000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf609000 - 00000000bf613000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf613000 - 00000000bf638000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf638000 - 00000000bf67b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf67b000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023f800000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bef32068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bef398f8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000bef32150 077A6 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf60af80 00040
[ 0.000000] ACPI: APIC 00000000bef399f0 000D8 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bef39ac8 001DE (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bef39ca8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bef39ce8 0006F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bef39d58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023f800000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023f800000
[ 0.000000] NODE_DATA [000000023f7fb000 - 000000023f7fffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000beee2
[ 0.000000] 0: 0x000bf607 -> 0x000bf608
[ 0.000000] 0: 0x000bf67b -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x0023f800
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x01] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x03] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x04] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x05] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x06] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x07] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x08] enabled)
[ 0.000000] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88023f400000 s70976 r8192 d23232 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058767
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175908k/9428992k available (3610k kernel code, 1065004k absent, 188080k reserved, 1567k data, 672k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3391.851 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.70 BogoMIPS (lpj=3391851)
[ 0.010596] pid_max: default: 32768 minimum: 301
[ 0.015476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023742] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031299] Mount-cache hash table entries: 256
[ 0.035894] CPU: Physical Processor ID: 0
[ 0.039901] CPU: Processor Core ID: 0
[ 0.043557] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.043558] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.056562] mce: CPU supports 9 MCE banks
[ 0.060570] CPU0: Thermal monitoring enabled (TM1)
[ 0.065353] using mwait in idle threads.
[ 0.069323] Freeing SMP alternatives: 20k freed
[ 0.073852] ACPI: Core revision 20110623
[ 0.085668] Disabling x2apic
[ 0.088567] Switched APIC routing to flat.
[ 0.092654] BUG: unable to handle kernel paging request at ffffffffff5fb020
[ 0.099625] IP: [<ffffffff81018f7e>] native_apic_mem_read+0x2/0x9
[ 0.105719] PGD 14cd067 PUD 14ce067 PMD 15be067 PTE 0
[ 0.110818] Oops: 0000 [#1] SMP
[ 0.114068] CPU 0
[ 0.115898] Modules linked in:
[ 0.119148]
[ 0.120635] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc5+ #3 To Be Filled By O.E.M. To Be Filled By O.E.M./P67 Extreme6
[ 0.131505] RIP: 0010:[<ffffffff81018f7e>] [<ffffffff81018f7e>] native_apic_mem_read+0x2/0x9
[ 0.140011] RSP: 0018:ffff880236499f18 EFLAGS: 00010246
[ 0.145309] RAX: ffffffff814d8500 RBX: 000000000000cab8 RCX: 0000000000000061
[ 0.152419] RDX: 00000000000000c0 RSI: 0000000000000046 RDI: 0000000000000020
[ 0.159523] RBP: 000000000000cac0 R08: 0000000000000000 R09: 0000000000000000
[ 0.166635] R10: 0000000000000001 R11: 0720072007200720 R12: 0000000000000008
[ 0.173747] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 0.180853] FS: 0000000000000000(0000) GS:ffff88023f400000(0000) knlGS:0000000000000000
[ 0.188916] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.194645] CR2: ffffffffff5fb020 CR3: 00000000014cb000 CR4: 00000000000406f0
[ 0.201755] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.208861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 0.215971] Process swapper/0 (pid: 1, threadinfo ffff880236498000, task ffff880236497750)
[ 0.224200] Stack:
[ 0.226203] ffffffff8152c571 ffffffff815b1f50 0000000000000000 0000000000000000
[ 0.233643] ffffffff81522abf 0000000000000000 ffffffff813842b4 0000000000000000
[ 0.241112] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.248604] Call Trace:
[ 0.251043] [<ffffffff8152c571>] ? native_smp_prepare_cpus+0x303/0x325
[ 0.257636] [<ffffffff81522abf>] ? kernel_init+0x46/0x10f
[ 0.263104] [<ffffffff813842b4>] ? kernel_thread_helper+0x4/0x10
[ 0.269173] [<ffffffff81522a79>] ? start_kernel+0x341/0x341
[ 0.274815] [<ffffffff813842b0>] ? gs_change+0xb/0xb
[ 0.279844] Code: b9 1b 00 00 00 0f 32 f6 c4 04 0f 95 c0 0f b6 c0 c3 83 3d f1 e6 5c 00 01 76 05 e9 00 c2 ff ff c3 89 ff 89 b7 00 b0 5f ff c3 89 ff <8b> 87 00 b0 5f ff c3 48 8b 07 25 ff 00 00 00 c3 48 8b 07 48 8b
[ 0.299789] RIP [<ffffffff81018f7e>] native_apic_mem_read+0x2/0x9
[ 0.305967] RSP <ffff880236499f18>
[ 0.309442] CR2:nel panic - not syncing: Attempted to kill init!
[ 0.323252] Pid: 1, comm: swapper/0 Tainted: G D 3.2.0-rc5+ #3
[<ffffffff8137b2ef>] ? no_context+0x1ff/0x20e
[ 0.353016] [<ffffffff812477a4>] ? uart_console_write+0x39/0x47
[ 0.358onsole_drivers+0x72/0x83
[ 0.371065] [<ffffffff8104eb5f>] ? up+0xb/0x34
[ 0.375580] [<ffffffff81037360>] ? console_un_thread_helper+0x4/0x10
[ 0.410795] [<ffffffff81522a79>] ? start_kernel+0x341/0x341
[ 0.416431] [<ffffffff813842b0>] [ 0.000000] Linux version 3.2.0-rc5+ (berck@luna) (gcc version 4.6.2 (Debian 4.6.2-6) ) #3 SMP Sun Dec 11 14:52:43 MST 2011
[ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beee2000 (usable)
[ 0.000000] BIOS-e820: 00000000beee2000 - 00000000bef3a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef3a000 - 00000000bf607000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf607000 - 00000000bf608000 (usable)
[ 0.000000] BIOS-e820: 00000000bf608000 - 00000000bf609000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf609000 - 00000000bf613000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf613000 - 00000000bf638000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf638000 - 00000000bf67b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf67b000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023f800000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bef32068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bef398f8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000bef32150 077A6 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf60af80 00040
[ 0.000000] ACPI: APIC 00000000bef399f0 000D8 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bef39ac8 001DE (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bef39ca8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bef39ce8 0006F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bef39d58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023f800000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023f800000
[ 0.000000] NODE_DATA [000000023f7fb000 - 000000023f7fffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000beee2
[ 0.000000] 0: 0x000bf607 -> 0x000bf608
[ 0.000000] 0: 0x000bf67b -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x0023f800
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x01] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x03] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x04] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x05] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x06] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x07] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x08] enabled)
[ 0.000000] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88023f400000 s70976 r8192 d23232 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058767
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175908k/9428992k available (3610k kernel code, 1065004k absent, 188080k reserved, 1567k data, 672k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3392.371 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.74 BogoMIPS (lpj=3392371)
[ 0.010596] pid_max: default: 32768 minimum: 301
[ 0.015486] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023786] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031340] Mount-cache hash table entries: 256
[ 0.035945] CPU: Physical Processor ID: 0
[ 0.039961] CPU: Processor Core ID: 0
[ 0.043618] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.043619] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.056632] mce: CPU supports 9 MCE banks
[ 0.060639] CPU0: Thermal monitoring enabled (TM1)
[ 0.065422] using mwait in idle threads.
[ 0.069392] Freeing SMP alternatives: 20k freed
[ 0.073920] ACPI: Core revision 20110623
[ 0.085774] Disabling x2apic
[ 0.088679] Switched APIC routing to flat.
[ 0.092766] BUG: unable to handle kernel paging request at ffffffffff5fb020
[ 0.099739] IP: [<ffffffff81018f7e>] native_apic_mem_read+0x2/0x9
[ 0.105830] PGD 14cd067 PUD 14ce067 PMD 15be067 PTE 0
[ 0.110929] Oops: 0000 [#1] SMP
[ 0.114180] CPU 0
[ 0.116011] Modules linked in:
[ 0.119262]
[ 0.120749] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc5+ #3 To Be Filled By O.E.M. To Be Filled By O.E.M./P67 Extreme6
[ 0.131626] RIP: 0010:[<ffffffff81018f7e>] [<ffffffff81018f7e>] native_apic_mem_read+0x2/0x9
[ 0.140131] RSP: 0018:ffff880236499f18 EFLAGS: 00010246
[ 0.145420] RAX: ffffffff814d8500 RBX: 000000000000cab8 RCX: 0000000000000061
[ 0.152540] RDX: 00000000000000c0 RSI: 0000000000000046 RDI: 0000000000000020
[ 0.159644] RBP: 000000000000cac0 R08: 0000000000000000 R09: 0000000000000000
[ 0.166766] R10: 0000000000000001 R11: 0720072007200720 R12: 0000000000000008
[ 0.173877] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 0.180980] FS: 0000000000000000(0000) GS:ffff88023f400000(0000) knlGS:0000000000000000
[ 0.189035] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.194756] CR2: ffffffffff5fb020 CR3: 00000000014cb000 CR4: 00000000000406f0
[ 0.201859] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.208965] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 0.216075] Process swapper/0 (pid: 1, threadinfo ffff880236498000, task ffff880236497750)
[ 0.224301] Stack:
[ 0.226309] ffffffff8152c571 ffffffff815b1f50 0000000000000000 0000000000000000
[ 0.233740] ffffffff81522abf 0000000000000000 ffffffff813842b4 0000000000000000
[ 0.241171] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.248614] Call Trace:
[ 0.251052] [<ffffffff8152c571>] ? native_smp_prepare_cpus+0x303/0x325
[ 0.257644] [<ffffffff81522abf>] ? kernel_init+0x46/0x10f
[ 0.263105] [<ffffffff813842b4>] ? kernel_thread_helper+0x4/0x10
[ 0.269174] [<ffffffff81522a79>] ? start_kernel+0x341/0x341
[ 0.274815] [<ffffffff813842b0>] ? gs_change+0xb/0xb
[ 0.279844] Code: b9 1b 00 00 00 0f 32 f6 c4 04 0f 95 c0 0f b6 c0 c3 83 3d f1 e6 5c 00 01 76 05 e9 00 c2 ff ff c3 89 ff 89 b7 00 b0 5f ff c3 89 ff <8b> 87 00 b0 5f ff c3 48 8b 07 25 ff 00 00 00 c3 48 8b 07 48 8b
[ 0.299773] RIP [<ffffffff81018f7e>] native_apic_mem_read+0x2/336] [<ffffffff8137b88e>] ? panic+0x95/0x18e
[ 0.337287] [<ffffffff81039498>] ? do_exit+0x8d/0x6c9
[ 0.342405] [<fff 0.352991] [<ffffffff812477a4>] ? uart_console_write+0x39/0x47
[ 0.358980] [<ffffffff8101bc32>] ? do_page_fault+0x155/0ffffff81382b2f>] ? page_fault+0x1f/0x30
[ 0.386668] [<ffffffff81018f7e>] ? native_apic_mem_read+0x2/0x9
[ 0.392658] [
next prev parent reply other threads:[~2011-12-11 22:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-10 1:56 Berck E. Nash
2011-12-10 20:17 ` Yinghai Lu
2011-12-10 22:58 ` Berck E. Nash
2011-12-10 23:11 ` Yinghai Lu
2011-12-11 7:57 ` Ingo Molnar
2011-12-11 21:43 ` Yinghai Lu
2011-12-11 22:05 ` Berck E. Nash [this message]
2011-12-12 3:40 ` Yinghai Lu
2011-12-12 23:21 ` Berck E. Nash
2011-12-13 0:25 ` Suresh Siddha
2011-12-13 1:29 ` Yinghai Lu
2011-12-13 1:41 ` Suresh Siddha
2011-12-13 4:32 ` Yinghai Lu
2011-12-13 5:13 ` Yinghai Lu
2011-12-16 13:59 ` Berck E. Nash
2011-12-18 8:47 ` Ingo Molnar
2011-12-12 23:42 ` H. Peter Anvin
2011-12-13 1:25 ` Yinghai Lu
2011-12-12 7:23 ` Suresh Siddha
[not found] <fa.1zfuXwqYK6u81uBoo3IdpawcpWw@ifi.uio.no>
[not found] ` <fa.p3cpkKIGUNv0/iot3o7KT9bb98M@ifi.uio.no>
[not found] ` <fa.iPHW7usT23k+cCA19L3eXEDu91Q@ifi.uio.no>
[not found] ` <fa.7eOK+XcsKUWU4ZXhBj2K6znxrvc@ifi.uio.no>
[not found] ` <fa.VGxfKOh1Z07X1TXm5PxMIlV4xu8@ifi.uio.no>
[not found] ` <fa.eH+BpYDdp4xIWE4V+wJu6hFrVxM@ifi.uio.no>
2012-10-19 20:42 ` rrl125
2012-10-19 23:03 ` Suresh Siddha
2012-10-19 23:32 ` Yinghai Lu
2012-10-19 23:36 ` H. Peter Anvin
2012-10-20 0:02 ` Suresh Siddha
2012-10-20 0:41 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE5291C.1030302@gmail.com \
--to=flyboy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suresh.b.siddha@intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome