mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Daniel Kurtz <djkurtz@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Iiro Valkonen <iiro.valkonen@atmel.com>,
	Henrik Rydberg <rydberg@euromail.se>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Benson Leung <bleung@chromium.org>,
	Yufeng Shen <miletus@chromium.org>
Subject: Re: [PATCH 00/20] cleanup atmel_mxt_ts
Date: Wed, 14 Mar 2012 11:43:41 +0900	[thread overview]
Message-ID: <4F6005DD.3080702@samsung.com> (raw)
In-Reply-To: <1331640263-18935-1-git-send-email-djkurtz@chromium.org>

On 03/13/2012 09:04 PM, Daniel Kurtz wrote:
> This patchset cleans up the atmel_mxt_ts touchscreen driver.
> In particular, it addresses the following issues:
>
> 1) sysfs
>     a) fw_update only by root
>     b) allow writing config
>     c) add backupnv to save config to device flash
> 2) faster initialization
>     a) read/write sets of registers using i2c block transactions
>     b) fetch object table as a set of i2c reads, one per object
>     c) write config data as a set of i2c writes, one per object
> 3) faster interrupt processing&  initialization times
>     a) cache important values at init instead of computing in isr
>     b) don't read message checksum byte (which isn't even enabled in fw)
>     c) read num messages first, instead of looking for 0xFF reportid
>     d) read all pending message bytes in one i2c read transaction
> 4) more correct MT-B support
>     a) send all (changed) contacts in a single EV_SYN/SYN_REPORT
>
> Daniel Kurtz (20):
>    Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
>    Input: atmel_mxt_ts - only allow root to update firmware
>    Input: atmel_mxt_ts - verify object size in mxt_write_object
>    Input: atmel_mxt_ts - refactor mxt_read/write_reg to take a length
>    Input: atmel_mxt_ts - dump mxt_read/write_reg
>    Input: atmel_mxt_ts - allow writing to object sysfs entry
>    Input: atmel_mxt_ts - add backupnv sysfs entry
>    Input: atmel_mxt_ts - store actual size and instance
>    Input: atmel_mxt_ts - do not read extra (checksum) byte
>    Input: atmel_mxt_ts - dump each message on just 1 line
>    Input: atmel_mxt_ts - refactor mxt_object_show
>    Input: atmel_mxt_ts - simplify event reporting
>    Input: atmel_mxt_ts - parse vector field of data packets
>    Input: atmel_mxt_ts - refactor reading object table
>    Input: atmel_mxt_ts - optimize writing of object table entries
>    Input: atmel_mxt_ts - refactor get info
>    Input: atmel_mxt_ts - use cached T9 reportid range in isr
>    Input: atmel_mxt_ts - read num messages, then all messages
>    Input: atmel_mxt_ts - remove mxt_make_highchg and parse T6 report
>    Input: atmel_mxt_ts - send all MT-B slots in one input report
>
>   drivers/input/touchscreen/atmel_mxt_ts.c |  590 +++++++++++++++---------------
>   1 files changed, 286 insertions(+), 304 deletions(-)
>

Thanks for updating of driver.

About all patches
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>

Henrik's review needs about modification of Multi-touch.

Thanks.

  parent reply	other threads:[~2012-03-14  2:43 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-13 12:04 Daniel Kurtz
2012-03-13 12:04 ` [PATCH 01/20] Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Daniel Kurtz
2012-03-13 12:04 ` [PATCH 02/20] Input: atmel_mxt_ts - only allow root to update firmware Daniel Kurtz
2012-03-20 14:38   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 03/20] Input: atmel_mxt_ts - verify object size in mxt_write_object Daniel Kurtz
2012-03-14  1:33   ` Joonyoung Shim
2012-03-14  2:13     ` Daniel Kurtz
2012-03-14  2:37     ` Joonyoung Shim
2012-03-13 12:04 ` [PATCH 04/20] Input: atmel_mxt_ts - refactor mxt_read/write_reg to take a length Daniel Kurtz
2012-03-13 12:04 ` [PATCH 05/20] Input: atmel_mxt_ts - dump mxt_read/write_reg Daniel Kurtz
2012-03-20 14:43   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 06/20] Input: atmel_mxt_ts - allow writing to object sysfs entry Daniel Kurtz
2012-03-19  8:04   ` Henrik Rydberg
2012-03-19  8:26     ` Daniel Kurtz
2012-03-20 14:51   ` Nick Dyer
2012-03-20 23:03   ` Alan Cox
2012-03-20 23:32     ` Nick Dyer
2012-03-13 12:04 ` [PATCH 07/20] Input: atmel_mxt_ts - add backupnv " Daniel Kurtz
2012-03-20 15:01   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 08/20] Input: atmel_mxt_ts - store actual size and instance Daniel Kurtz
2012-03-20 15:05   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 09/20] Input: atmel_mxt_ts - do not read extra (checksum) byte Daniel Kurtz
2012-03-20 15:07   ` Nick Dyer
2012-03-22 10:18     ` Bowens, Alan
2012-03-13 12:04 ` [PATCH 10/20] Input: atmel_mxt_ts - dump each message on just 1 line Daniel Kurtz
2012-03-20 15:08   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 11/20] Input: atmel_mxt_ts - refactor mxt_object_show Daniel Kurtz
2012-03-20 15:11   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 12/20] Input: atmel_mxt_ts - simplify event reporting Daniel Kurtz
2012-03-19  8:26   ` Henrik Rydberg
2012-03-19  9:06     ` Daniel Kurtz
2012-03-20 15:13   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 13/20] Input: atmel_mxt_ts - parse vector field of data packets Daniel Kurtz
2012-03-20 15:23   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 14/20] Input: atmel_mxt_ts - refactor reading object table Daniel Kurtz
2012-03-20 15:19   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 15/20] Input: atmel_mxt_ts - optimize writing of object table entries Daniel Kurtz
2012-03-13 12:04 ` [PATCH 16/20] Input: atmel_mxt_ts - refactor get info Daniel Kurtz
2012-03-20 15:21   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 17/20] Input: atmel_mxt_ts - use cached T9 reportid range in isr Daniel Kurtz
2012-03-20 15:30   ` Nick Dyer
2012-03-13 12:04 ` [PATCH 18/20] Input: atmel_mxt_ts - read num messages, then all messages Daniel Kurtz
2012-03-14  2:32   ` Joonyoung Shim
2012-03-14  3:13     ` Daniel Kurtz
2012-03-20 15:28       ` Nick Dyer
2012-03-13 12:04 ` [PATCH 19/20] Input: atmel_mxt_ts - remove mxt_make_highchg and parse T6 report Daniel Kurtz
2012-03-20 15:38   ` Nick Dyer
2012-03-29 15:20     ` Daniel Kurtz
2012-03-30  7:00       ` Nick Dyer
2012-03-13 12:04 ` [PATCH 20/20] Input: atmel_mxt_ts - send all MT-B slots in one input report Daniel Kurtz
2012-03-20 15:39   ` Nick Dyer
2012-03-14  2:43 ` Joonyoung Shim [this message]
2012-03-14 17:00 ` [PATCH 00/20] cleanup atmel_mxt_ts Valkonen, Iiro
2012-03-20 14:33 ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F6005DD.3080702@samsung.com \
    --to=jy0922.shim@samsung.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=iiro.valkonen@atmel.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miletus@chromium.org \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome