From: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>,
Sarah Sharp <sarah.a.sharp@linux.intel.com>,
linux-pci@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
Date: Fri, 20 Apr 2012 19:25:54 +0200 [thread overview]
Message-ID: <4F919C22.1070608@fold.natur.cuni.cz> (raw)
In-Reply-To: <CAE9FiQUQRAfdG1J6XUVcOVkeR00vyqnCrBg1O3S_ByC3dKOUog@mail.gmail.com>
Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 4:23 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>>>>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>>>>> and posted in my previous emails. It seems linux flips some value so on every second card
>>>>> removal it really does realize it was just unplugged.
>>>>
>>>> that is really looks like silicon problem.
>>>>
>>> please check attached patch. Hope link change bit is flip around...
>>> if there is change, we could add some logic:
>>> check if the device is there, or will reset link to normal state.
>>
>> I don't think it helped but maybe you will see some difference:
>
> No, the interrupt still get delayed.
>
>>
>> Complete dmesg is attached. OK, the "60sec" delay is when xhci_hcd gives away its attempts.
>> I am not knowlegeable of the kernel at all but it is my impression that because of the
>> card presence detection there is no way to prevent that. But, if I get it right, now when I
>> pluging the card+USB disk in it into the computer before those "60sec" it gets detected,
>> so my problem is gone (xhci cancels the timeout because a "new card" was popped in with a "new"
>> device.
>>
>> So, although I am now not sure whether I need your last patch, for the practical purpose that
>> I want to plugin a new card with a device into my computer, it works now. (added Sarah Sharp
>> into CC: just to make her aware of this scenario, no problem with xhci_hcd in my eyes)
>> ;)
>
> please try to "safely remove the card" before removing the card physically like:
>
> echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
>
> that will stop the drivers and remove pci device in the kernel.
Aha.
Apr 20 19:23:15 vostro kernel: [30595.322210] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 19:23:15 vostro kernel: [30595.322215] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 19:23:15 vostro kernel: [30595.329696] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:15 vostro kernel: [30595.329705] usb usb6: USB disconnect, device number 1
Apr 20 19:23:15 vostro kernel: [30595.329865] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 19:23:15 vostro kernel: [30595.329869] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 19:23:15 vostro kernel: [30595.329875] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:15 vostro kernel: [30595.329879] usb usb5: USB disconnect, device number 1
Apr 20 19:23:15 vostro kernel: [30595.330071] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 19:23:15 vostro kernel: [30595.330170] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 19:23:15 vostro kernel: [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 19:23:15 vostro kernel: [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 19:23:15 vostro kernel: [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 19:23:15 vostro kernel: [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 19:23:15 vostro kernel: [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 19:23:15 vostro kernel: [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 19:23:15 vostro kernel: [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 19:23:15 vostro kernel: [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 19:23:15 vostro kernel: [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 19:23:15 vostro kernel: [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 19:23:15 vostro kernel: [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 19:23:15 vostro kernel: [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 19:23:15 vostro kernel: [30595.460475] usb usb5: Product: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 19:23:15 vostro kernel: [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 19:23:15 vostro kernel: [30595.460600] hub 5-0:1.0: USB hub found
Apr 20 19:23:15 vostro kernel: [30595.460611] hub 5-0:1.0: 2 ports detected
Apr 20 19:23:15 vostro kernel: [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 19:23:15 vostro kernel: [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 19:23:15 vostro kernel: [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 19:23:15 vostro kernel: [30595.463434] usb usb6: Product: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 19:23:15 vostro kernel: [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 19:23:15 vostro kernel: [30595.463534] hub 6-0:1.0: USB hub found
Apr 20 19:23:15 vostro kernel: [30595.463547] hub 6-0:1.0: 2 ports detected
echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
Apr 20 19:23:27 vostro kernel: [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:27 vostro kernel: [30607.046719] usb usb6: USB disconnect, device number 1
Apr 20 19:23:27 vostro kernel: [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 19:23:27 vostro kernel: [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:27 vostro kernel: [30607.065353] usb usb5: USB disconnect, device number 1
Apr 20 19:23:27 vostro kernel: [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
removing the card
Apr 20 19:23:36 vostro kernel: [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 19:23:36 vostro kernel: [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
next prev parent reply other threads:[~2012-04-20 17:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4F6A483D.50702@fold.natur.cuni.cz>
[not found] ` <CAE9FiQVnErU-cska4gpinyj-LOup-U+3vsEG2z_-7h6kyREYtw@mail.gmail.com>
[not found] ` <4F6A5A53.305@fold.natur.cuni.cz>
[not found] ` <CAE9FiQXP7fO9OGN557jdofFFiFj96wL--ZA8X3UPEJ6o9JLvBw@mail.gmail.com>
[not found] ` <4F8BEB1D.9080903@fold.natur.cuni.cz>
[not found] ` <CAE9FiQXoX3J6P_9Tun_XbkK3egvSeBZxAtC13HacFDO0fwmZaA@mail.gmail.com>
[not found] ` <4F8C6E4E.1000205@fold.natur.cuni.cz>
2012-04-16 20:53 ` Yinghai Lu
2012-04-17 1:42 ` Yinghai Lu
2012-04-17 2:48 ` Yinghai Lu
2012-04-17 7:27 ` Martin Mokrejs
2012-04-17 8:46 ` Yinghai Lu
2012-04-17 8:58 ` Yinghai Lu
2012-04-17 9:34 ` Martin Mokrejs
2012-04-17 17:07 ` Yinghai Lu
2012-04-17 19:02 ` Yinghai Lu
2012-04-18 17:53 ` Martin Mokrejs
2012-04-18 19:48 ` Yinghai Lu
2012-04-18 20:29 ` Martin Mokrejs
2012-04-18 20:58 ` Yinghai Lu
2012-04-18 22:55 ` Martin Mokrejs
2012-04-19 1:57 ` Yinghai Lu
2012-04-19 3:16 ` Mark Lord
2012-04-19 23:16 ` Martin Mokrejs
2012-04-19 21:48 ` Yinghai Lu
2012-04-20 2:06 ` Yinghai Lu
2012-04-20 11:23 ` Martin Mokrejs
2012-04-20 16:01 ` Yinghai Lu
2012-04-20 17:25 ` Martin Mokrejs [this message]
2012-04-20 17:28 ` Martin Mokrejs
2012-04-20 18:47 ` Yinghai Lu
2012-04-20 23:17 ` Sarah Sharp
2012-04-21 0:09 ` Yinghai Lu
2012-04-21 4:46 ` Yinghai Lu
2012-04-21 9:01 ` Martin Mokrejs
2012-04-21 9:12 ` Martin Mokrejs
2012-04-21 13:25 ` Sarah Sharp
2012-04-21 18:46 ` Yinghai Lu
2012-04-24 20:47 ` Martin Mokrejs
2012-04-24 20:48 ` Martin Mokrejs
2012-04-26 16:08 ` Yinghai Lu
2012-04-26 22:08 ` Martin Mokrejs
2012-04-26 22:44 ` Yinghai Lu
2012-04-26 23:26 ` Martin Mokrejs
2012-04-27 3:51 ` Yinghai Lu
2012-04-20 23:50 ` Martin Mokrejs
2012-04-21 0:04 ` Yinghai Lu
2012-05-04 16:16 ` Martin Mokrejs
2012-04-19 17:32 ` Martin Mokrejs
2012-04-19 18:13 ` Yinghai Lu
2012-05-04 15:58 ` Martin Mokrejs
2012-05-04 20:43 ` Martin Mokrejs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F919C22.1070608@fold.natur.cuni.cz \
--to=mmokrejs@fold.natur.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®