Martin Mokrejs wrote: > Hi, > I was removing an ExpressCard with a NEC chipset used by xhci_hcd and the kernel crashed > on my Dell Vostro 3550 laptop. Its express slot chipset somehow does not report properly > that a card was unplugged, as discussed earlier here on linux-pci under Subject > "Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe". > > Maybe this helps somebody to find the cause? Here is a bit of the attached Oops snapshot > stacktrace: > > klist_del > fdevice_del > device_unregister > pci_stop_bus_device > pci_stop_and_remove_bus_device > devehp_unconfigure_device > pciehp_disable_slot > ? pciehp_disable_slot > pciehp_power_thread > process_one_work > worker_thriad > ? manage_workers.clone > ? manage_workers.clone > kthrerd > ... This is 100% reproducible. It happens with 3.4-rc5 and 3.3.4 kernels while not with 3.2.14. I did not have the external enclosure earlier but repeated unplugs/re-plugs of the NEC-based expresscard were/are just not enough to trigger the Oops. One needs the ASMedia2105 in addition. To hit the Ooops, the disk has to be *RE-detected* and unplugged (so not its very first plugin). Express card removal after the very first plugin says usually something about the surprise removal. When I re-plug the disk, it gets detected, and it removal hits the Ooops. I am attaching dmesg from 3.2.14 kernel which does not have the problem. You can see how many times I did remove and re-plug the card. If I waited long ebough for xhci_hcd to timeout waiting for the unplugged device, it says xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command xHCI xhci_drop_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub xhci_hcd 0000:11:00.0: USB bus 5 deregistered xhci_hcd 0000:11:00.0: PCI INT A disabled and then, subsequent re-plug of the card with the disk attached results in detected SCSI device. In contrast, if I re-plug the express card earlier express card slot change is reported but the disc is not detected (something is blocked in xhci_hcd I think). The above stacktrace (of actually the camera snapshot is not the first stacktrace, unfortunately). I see there are 2-3 screen scrolled away. Hmm, but I do not have anything what could be used as a remote console ... Martin