mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stanimir Varbanov <stanimir.varbanov@linaro.org>
To: Hans Verkuil <hverkuil@xs4all.nl>,
	Stanimir Varbanov <stanimir.varbanov@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v4 5/9] media: venus: vdec: add video decoder files
Date: Mon, 5 Dec 2016 14:25:18 +0200	[thread overview]
Message-ID: <4a016b0a-f10f-99c2-4e48-6110b3fb4f48@linaro.org> (raw)
In-Reply-To: <4457b2fe-3e47-5085-0c08-7fe69b2b46b5@xs4all.nl>

Hi Hans,

Thanks for the comments!

On 12/05/2016 01:32 PM, Hans Verkuil wrote:
> I have two comments (and the same two comments apply to the video encoder patch
> as well):
> 
> On 12/01/2016 10:03 AM, Stanimir Varbanov wrote:
>> This consists of video decoder implementation plus decoder
>> controls.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
>> ---
>>  drivers/media/platform/qcom/venus/vdec.c       | 976 +++++++++++++++++++++++++
>>  drivers/media/platform/qcom/venus/vdec.h       |  32 +
>>  drivers/media/platform/qcom/venus/vdec_ctrls.c | 149 ++++
>>  3 files changed, 1157 insertions(+)
>>  create mode 100644 drivers/media/platform/qcom/venus/vdec.c
>>  create mode 100644 drivers/media/platform/qcom/venus/vdec.h
>>  create mode 100644 drivers/media/platform/qcom/venus/vdec_ctrls.c
>>
>> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
>> new file mode 100644
>> index 000000000000..9f585a1e0ff1
>> --- /dev/null
>> +++ b/drivers/media/platform/qcom/venus/vdec.c
>> @@ -0,0 +1,976 @@
> 
> <snip>
> 
>> +static int
>> +vdec_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
>> +{
>> +	struct venus_inst *inst = to_inst(file);
>> +
>> +	if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
>> +	    s->target != V4L2_SEL_TGT_COMPOSE)
>> +		return -EINVAL;
>> +
>> +	switch (s->target) {
>> +	case V4L2_SEL_TGT_COMPOSE:
>> +		s->r.width = inst->out_width;
>> +		s->r.height = inst->out_height;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	s->r.top = 0;
>> +	s->r.left = 0;
>> +
>> +	return 0;
>> +}
> 
> This doesn't actually set anything, so what's the point of this function?
> 
> I've fixed the corresponding test in v4l2-compliance so you can now drop this
> op and v4l2-compliance won't complain anymore.

OK I will give a try.

> 
>> +static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
>> +{
>> +	struct venus_inst *inst = vb2_get_drv_priv(q);
>> +	struct venus_core *core = inst->core;
>> +	struct device *dev = core->dev;
>> +	u32 ptype;
>> +	int ret;
>> +
>> +	mutex_lock(&inst->lock);
>> +
>> +	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> +		inst->streamon_out = 1;
>> +	else
>> +		inst->streamon_cap = 1;
>> +
>> +	if (!(inst->streamon_out & inst->streamon_cap)) {
>> +		mutex_unlock(&inst->lock);
>> +		return 0;
>> +	}
>> +
>> +	inst->reconfig = false;
>> +	inst->sequence = 0;
>> +	inst->codec_cfg = false;
>> +
>> +	ret = pm_runtime_get_sync(dev);
>> +	if (ret < 0)
>> +		return ret;
> 
> This should be a goto so that 'helper_buffers_done(inst, VB2_BUF_STATE_QUEUED);'
> is called on error.
> 
> It's wrong anyway since you don't unlock the mutex in this return path either.

yes, this return is wrong, will correct it in next version.

-- 
regards,
Stan

  reply	other threads:[~2016-12-05 12:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-01  9:03 [PATCH v4 0/9] Qualcomm video decoder/encoder driver Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 1/9] media: v4l2-mem2mem: extend m2m APIs for more accurate buffer management Stanimir Varbanov
2016-12-03  0:56   ` kbuild test robot
2016-12-05 11:25   ` Hans Verkuil
2016-12-05 12:26     ` Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 2/9] doc: DT: venus: binding document for Qualcomm video driver Stanimir Varbanov
2016-12-06  0:22   ` Rob Herring
2016-12-01  9:03 ` [PATCH v4 3/9] MAINTAINERS: Add Qualcomm Venus video accelerator driver Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 4/9] media: venus: adding core part and helper functions Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 5/9] media: venus: vdec: add video decoder files Stanimir Varbanov
2016-12-05 11:32   ` Hans Verkuil
2016-12-05 12:25     ` Stanimir Varbanov [this message]
2016-12-01  9:03 ` [PATCH v4 6/9] media: venus: venc: add video encoder files Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 7/9] media: venus: hfi: add Host Firmware Interface (HFI) Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 8/9] media: venus: hfi: add Venus HFI files Stanimir Varbanov
2016-12-05 12:05   ` Hans Verkuil
2016-12-05 12:20     ` Stanimir Varbanov
2017-01-09 13:04       ` Hans Verkuil
2017-01-10 12:07         ` Stanimir Varbanov
2016-12-01  9:03 ` [PATCH v4 9/9] media: venus: enable building of Venus video driver Stanimir Varbanov
2016-12-03  0:07   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4a016b0a-f10f-99c2-4e48-6110b3fb4f48@linaro.org \
    --to=stanimir.varbanov@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®