From: Neil Armstrong <narmstrong@baylibre.com>
To: Ludovic Barre <ludovic.Barre@st.com>,
Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-kernel@vger.kernel.org,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/6] ARM: stm32: add initial STM32MPU support
Date: Fri, 8 Dec 2017 15:41:29 +0100 [thread overview]
Message-ID: <4a21e715-43f8-c2be-a626-fe7977b167e8@baylibre.com> (raw)
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
On 08/12/2017 15:11, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
>
> This patch series extends the existing STM32 microcontrollers (MCUs)
> family to microprocessors (MPUs). The MPU platform (based on
> Arm Cortex-A) is a continuation of the MCU one (based on Arm
> Cortex-M) in that it shares a wide number of hardware blocks.
>
> Ludovic Barre (6):
> ARM: stm32: prepare stm32 family to welcome armv7 architecture
> ARM: stm32: add initial support for STM32MP157
> pinctrl: stm32: Add STM32MP157 MPU support
> ARM: configs: multi_v7: add stm32 support
> ARM: dts: stm32: add stm32mp157c initial support
> ARM: dts: stm32: add initial support of stm32mp157c eval board
>
> Documentation/arm/stm32/overview.txt | 21 +-
> Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
> .../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
> arch/arm/boot/dts/Makefile | 5 +-
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
> arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
> arch/arm/configs/multi_v7_defconfig | 2 +
> arch/arm/mach-stm32/Kconfig | 48 +-
> arch/arm/mach-stm32/Makefile | 3 +-
> arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
> arch/arm/mach-stm32/board-mpu-dt.c | 16 +
> drivers/pinctrl/stm32/Kconfig | 6 +
> drivers/pinctrl/stm32/Makefile | 1 +
> drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
> 17 files changed, 2656 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
> create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
> rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
> create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
>
Hi Ludovic,
This is great news !
But I couldn't find any announcement on ST ?
I'm curious, but which GPU will be embedded ?
The serie looks great, I don't have more comments on this.
Neil
prev parent reply other threads:[~2017-12-08 14:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 14:11 Ludovic Barre
2017-12-08 14:11 ` [PATCH 1/6] ARM: stm32: prepare stm32 family to welcome armv7 architecture Ludovic Barre
2017-12-11 10:25 ` Linus Walleij
2017-12-11 13:40 ` Arnd Bergmann
2017-12-11 14:22 ` Ludovic BARRE
2017-12-12 11:03 ` afzal mohammed
2017-12-12 13:32 ` Ludovic BARRE
2017-12-08 14:11 ` [PATCH 2/6] ARM: stm32: add initial support for STM32MP157 Ludovic Barre
2017-12-12 23:24 ` Rob Herring
2017-12-13 9:02 ` Ludovic BARRE
2017-12-08 14:11 ` [PATCH 3/6] pinctrl: stm32: Add STM32MP157 MPU support Ludovic Barre
2017-12-12 23:25 ` Rob Herring
2017-12-08 14:11 ` [PATCH 4/6] ARM: configs: multi_v7: add stm32 support Ludovic Barre
2017-12-08 14:11 ` [PATCH 5/6] ARM: dts: stm32: add stm32mp157c initial support Ludovic Barre
2017-12-08 14:11 ` [PATCH 6/6] ARM: dts: stm32: add initial support of stm32mp157c eval board Ludovic Barre
2017-12-08 14:41 ` Neil Armstrong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a21e715-43f8-c2be-a626-fe7977b167e8@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=alexandre.torgue@st.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.Barre@st.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®