mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Yonglong Liu <liuyonglong@huawei.com>,
	davem@davemloft.net, andrew@lunn.ch
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linuxarm@huawei.com, salil.mehta@huawei.com,
	yisen.zhuang@huawei.com, shiju.jose@huawei.com
Subject: Re: [RFC PATCH V2 net] net: phy: Fix "link partner" information disappear issue
Date: Tue, 15 Oct 2019 22:02:27 +0200	[thread overview]
Message-ID: <4a281b6d-1531-eac6-dcc5-8306d342caa4@gmail.com> (raw)
In-Reply-To: <1571057797-37602-1-git-send-email-liuyonglong@huawei.com>

On 14.10.2019 14:56, Yonglong Liu wrote:
> Some drivers just call phy_ethtool_ksettings_set() to set the
> links, for those phy drivers that use genphy_read_status(), if
> autoneg is on, and the link is up, than execute "ethtool -s
> ethx autoneg on" will cause "link partner" information disappear.
> 
> The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
> ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
> the link didn't change, so genphy_read_status() just return, and
> phydev->lp_advertising is zero now.
> 
> This patch moves the clear operation of lp_advertising from
> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
> if autoneg on and autoneg not complete, just clear what the
> generic functions care about.
> 
> Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
> 
Looks good to me, two small nits below.


> ---
> change log:
> V2: moves the clear operation of lp_advertising from
> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
> if autoneg on and autoneg not complete, just clear what the
> generic functions care about. Suggested by Heiner Kallweit.
> ---
> ---
This line seems to be duplicated.

>  drivers/net/phy/phy-c45.c    |  2 ++
>  drivers/net/phy/phy.c        |  3 ---
>  drivers/net/phy/phy_device.c | 12 +++++++++++-
>  3 files changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index 7935593..a1caeee 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_device *phydev)
>  {
>  	int val;
>  
> +	linkmode_zero(phydev->lp_advertising);
> +
>  	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
>  	if (val < 0)
>  		return val;
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 119e6f4..105d389b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -572,9 +572,6 @@ int phy_start_aneg(struct phy_device *phydev)
>  	if (AUTONEG_DISABLE == phydev->autoneg)
>  		phy_sanitize_settings(phydev);
>  
> -	/* Invalidate LP advertising flags */
> -	linkmode_zero(phydev->lp_advertising);
> -
>  	err = phy_config_aneg(phydev);
>  	if (err < 0)
>  		goto out_unlock;
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 9d2bbb1..4b43466 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1787,7 +1787,14 @@ int genphy_read_lpa(struct phy_device *phydev)
>  {
>  	int lpa, lpagb;
>  
> -	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
> +	if (phydev->autoneg == AUTONEG_ENABLE) {
> +		if (!phydev->autoneg_complete) {
> +			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
> +							0);
> +			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
> +			return 0;
> +		}
> +
>  		if (phydev->is_gigabit_capable) {
>  			lpagb = phy_read(phydev, MII_STAT1000);
>  			if (lpagb < 0)
> @@ -1816,6 +1823,9 @@ int genphy_read_lpa(struct phy_device *phydev)
>  
>  		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
>  	}
> +	else {

"} else {" should be on one line.

> +		linkmode_zero(phydev->lp_advertising);
> +	}
>  
>  	return 0;
>  }
> 


  reply	other threads:[~2019-10-15 20:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-14 12:56 Yonglong Liu
2019-10-15 20:02 ` Heiner Kallweit [this message]
2019-10-16  2:27   ` Yonglong Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4a281b6d-1531-eac6-dcc5-8306d342caa4@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=liuyonglong@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=salil.mehta@huawei.com \
    --cc=shiju.jose@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome