Re: [PATCH] iio/gyro/bmg160: Use millidegrees for temperature scale

[Mike Looijmans <mike.looijmans@topic.nl>]

On 12-02-19 18:00, Tomasz Duszynski wrote:
> On Tue, Feb 12, 2019 at 03:25:49PM +0100, Mike Looijmans wrote:
>> Standard unit for temperature is millidegrees Celcius, whereas this driver
>> was reporting in degrees. Fix the scale factor in the driver.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>> ---
>>   drivers/iio/gyro/bmg160_core.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
>> index 63ca316..ad7f8cb 100644
>> --- a/drivers/iio/gyro/bmg160_core.c
>> +++ b/drivers/iio/gyro/bmg160_core.c
>> @@ -585,8 +585,9 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
>>   		*val = 0;
>>   		switch (chan->type) {
>>   		case IIO_TEMP:
>> -			*val2 = 500000;
>> -			return IIO_VAL_INT_PLUS_MICRO;
>> +			*val = 500;
>> +			*val2 = 0;
>> +			return IIO_VAL_INT;
> 
> You are returning integer type to iio so there's no point in touching
> val2. iio will ignore it anyway.

Indeed, I'll post a v2 for that.

> 
>>   		case IIO_ANGL_VEL:
>>   		{
>>   			int i;
>> --
>> 1.9.1
>>