From: Andrzej Hajda <andrzej.hajda@intel.com>
To: Rex-BC Chen <rex-bc.chen@mediatek.com>, <chunkuang.hu@kernel.org>,
<matthias.bgg@gmail.com>, <narmstrong@baylibre.com>,
<robert.foss@linaro.org>, <daniel@ffwll.ch>, <airlied@linux.ie>,
<p.zabel@pengutronix.de>
Cc: <xji@analogixsemi.com>, <jitao.shi@mediatek.com>,
<xinlei.lee@mediatek.com>,
<angelogioacchino.delregno@collabora.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: Re: [v10,2/3] drm/mediatek: implement the DSI HS packets aligned
Date: Wed, 19 Jan 2022 09:35:01 +0100 [thread overview]
Message-ID: <4abe1f96-aafd-71bc-5f5e-bfcc4320c8c4@intel.com> (raw)
In-Reply-To: <20220119022543.26093-3-rex-bc.chen@mediatek.com>
On 19.01.2022 03:25, Rex-BC Chen wrote:
> Some DSI RX devices (for example, anx7625) require last alignment of
> packets on all lanes after each row of data is sent.
> Otherwise, there will be some issues of shift or scroll for screen.
>
> Take horizontal_sync_active_byte for a example,
> we roundup the HSA packet data to lane number, and the subtraction of 2
> is the packet data value added by the roundup operation, making the
> long packets are integer multiples of lane number.
> This value (2) varies with the lane number, and that is the reason we
> do this operation when the lane number is 4.
>
> In the previous operation of function "mtk_dsi_config_vdo_timing",
> the length of HSA and HFP data packets has been adjusted to an
> integration multiple of lane number.
> Since the number of RGB data packets cannot be guaranteed to be an
> integer multiple of lane number, we modify the data packet length of
> HBP so that the number of HBP + RGB is equal to the lane number.
> So after sending a line of data (HSA + HBP + RGB + HFP), the data
> lanes are aligned.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Regards
Andrzej
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 5d90d2eb0019..e91b3fff4342 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -500,6 +500,18 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> DRM_WARN("HFP + HBP less than d-phy, FPS will under 60Hz\n");
> }
>
> + if ((dsi->mode_flags & MIPI_DSI_HS_PKT_END_ALIGNED) &&
> + (dsi->lanes == 4)) {
> + horizontal_sync_active_byte =
> + roundup(horizontal_sync_active_byte, dsi->lanes) - 2;
> + horizontal_frontporch_byte =
> + roundup(horizontal_frontporch_byte, dsi->lanes) - 2;
> + horizontal_backporch_byte =
> + roundup(horizontal_backporch_byte, dsi->lanes) - 2;
> + horizontal_backporch_byte -=
> + (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes;
> + }
> +
> writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
> writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
> writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
next prev parent reply other threads:[~2022-01-19 8:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-19 2:25 [v10,0/3] force hsa hbp hfp packets multiple of lanenum to avoid screen shift Rex-BC Chen
2022-01-19 2:25 ` [v10,1/3] drm/dsi: transfer DSI HS packets ending at the same time Rex-BC Chen
2022-01-19 8:34 ` Andrzej Hajda
2022-01-25 4:13 ` Rex-BC Chen
2022-01-19 2:25 ` [v10,2/3] drm/mediatek: implement the DSI HS packets aligned Rex-BC Chen
2022-01-19 8:35 ` Andrzej Hajda [this message]
2022-01-19 8:43 ` AngeloGioacchino Del Regno
2022-01-19 23:19 ` Chun-Kuang Hu
2022-01-19 2:25 ` [v10,3/3] drm/bridge: anx7625: config hs packets end aligned to avoid screen shift Rex-BC Chen
2022-01-19 8:35 ` Andrzej Hajda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4abe1f96-aafd-71bc-5f5e-bfcc4320c8c4@intel.com \
--to=andrzej.hajda@intel.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=airlied@linux.ie \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunkuang.hu@kernel.org \
--cc=daniel@ffwll.ch \
--cc=jitao.shi@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=narmstrong@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=rex-bc.chen@mediatek.com \
--cc=robert.foss@linaro.org \
--cc=xinlei.lee@mediatek.com \
--cc=xji@analogixsemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome