From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Abel Vesa <abel.vesa@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v2 0/5] arm64: dts: qcom: eliza-cqs-evk: Add storage subtypes and rework generic parts
Date: Wed, 23 Sep 2026 14:59:19 +0200 [thread overview]
Message-ID: <4acd4d53-a444-4282-9bdd-1f2f2a487239@oss.qualcomm.com> (raw)
In-Reply-To: <20260915-dts-qcom-eliza-add-ufs-variant-v2-0-86d72a2a8f47@oss.qualcomm.com>
On 9/15/26 2:03 PM, Abel Vesa wrote:
> It turns out there is a UFS variant of the Eliza CQS SoM as well. So lets
> differentiate between them with -emmc and -ufs suffixes for DTBs and
> compatible strings.
>
> Adding -emmc suffix for to the current Eliza CQS SoM and EVK devicetree
> files will not affect any current users as these boards have not reached
> public use yet.
>
> Also, move the sound card support from the eliza-cqs-evk to the generic
> eliza-evk, which will allow it to be reused not only by the UFS variant,
> but also by the Eliza CQM EVK later on.
>
> Changes in v2:
> - Actually replace (and remove) the eliza-cqs-evk.dtsi when the
> eliza-cqs-evk-emmc.dtsi is added.
> - Collect Krzysztof's R-b tag.
> - Link to v1: https://patch.msgid.link/20260914-dts-qcom-eliza-add-ufs-variant-v1-0-78b3249eae61@oss.qualcomm.com
>
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
> Abel Vesa (5):
> dt-bindings: arm: qcom: Add more compatible for Eliza EVKs and SoMs
> arm64: dts: qcom: eliza-cqs-evk: Move sound card support to Eliza EVK generic
> arm64: dts: qcom: eliza: Rename existing EVK to suggest eMMC
> arm64: dts: qcom: eliza: Add CQS SoM UFS variant
> arm64: dts: qcom: eliza: Add CQS EVK UFS variant
I was hoping there would be a bit less duplication here..
$ diff arch/arm64/boot/dts/qcom/eliza-cqs-som-emmc.dtsi arch/arm64/boot/dts/qcom/eliza-cqs-som-ufs.dtsi
281,282c281,282
< regulator-min-microvolt = <1800000>;
< regulator-max-microvolt = <1800000>;
---
> regulator-min-microvolt = <1140000>;
> regulator-max-microvolt = <1260000>;
399,414d398
< &sdhc_1 {
< vmmc-supply = <&vreg_l12b>;
< vqmmc-supply = <&vreg_l1d>;
< pinctrl-0 = <&sdc1_default>;
< pinctrl-1 = <&sdc1_sleep>;
< pinctrl-names = "default", "sleep";
< mmc-hs400-1_8v;
< mmc-hs200-1_8v;
< non-removable;
< supports-cqe;
< no-sdio;
< no-sd;
<
< status = "okay";
< };
<
418a403,420
> };
>
> &ufs_mem_hc {
> reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
>
> vcc-supply = <&vreg_l12b>;
> vcc-max-microamp = <1300000>;
> vccq-supply = <&vreg_l1d>;
> vccq-max-microamp = <1200000>;
>
> status = "okay";
> };
>
> &ufs_mem_phy {
> vdda-phy-supply = <&vreg_l6b>;
> vdda-pll-supply = <&vreg_l4b>;
>
> status = "okay";
Konrad
next prev parent reply other threads:[~2026-09-23 12:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 12:03 Abel Vesa
2026-09-15 12:03 ` [PATCH v2 1/5] dt-bindings: arm: qcom: Add more compatible for Eliza EVKs and SoMs Abel Vesa
2026-09-15 12:03 ` [PATCH v2 2/5] arm64: dts: qcom: eliza-cqs-evk: Move sound card support to Eliza EVK generic Abel Vesa
2026-09-23 12:52 ` Konrad Dybcio
2026-09-24 11:02 ` Abel Vesa
2026-09-15 12:03 ` [PATCH v2 3/5] arm64: dts: qcom: eliza: Rename existing EVK to suggest eMMC Abel Vesa
2026-09-15 12:03 ` [PATCH v2 4/5] arm64: dts: qcom: eliza: Add CQS SoM UFS variant Abel Vesa
2026-09-28 2:15 ` Bjorn Andersson
2026-09-15 12:03 ` [PATCH v2 5/5] arm64: dts: qcom: eliza: Add CQS EVK " Abel Vesa
2026-09-23 12:59 ` Konrad Dybcio [this message]
2026-09-24 11:00 ` [PATCH v2 0/5] arm64: dts: qcom: eliza-cqs-evk: Add storage subtypes and rework generic parts Abel Vesa
2026-09-28 2:18 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4acd4d53-a444-4282-9bdd-1f2f2a487239@oss.qualcomm.com \
--to=konrad.dybcio@oss.qualcomm.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®