Re: [PATCH v2 2/5] dt-bindings: thermal: tsens: Add ipq5332 compatible

[Praveenkumar I <quic_ipkumar@quicinc.com>]

On 7/12/2023 7:55 PM, Krzysztof Kozlowski wrote:
> On 12/07/2023 13:35, Praveenkumar I wrote:
>> IPQ5332 uses TSENS v2.3.3 with combined interrupt. RPM is not
>> available in the SoC, hence adding new compatible to have the
>> sensor enablement and calibration function.
>>
>> This patch also adds nvmem-cell-names for ipq5332
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>> [v2]:
>> 	Followed the order for ipq5332 and added nvmem-cell-names.
>>
>>   .../devicetree/bindings/thermal/qcom-tsens.yaml      | 12 ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> index 27e9e16e6455..cca115906762 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> @@ -69,6 +69,7 @@ properties:
>>   
>>         - description: v2 of TSENS with combined interrupt
>>           enum:
>> +          - qcom,ipq5332-tsens
>>             - qcom,ipq8074-tsens
>>   
>>         - description: v2 of TSENS with combined interrupt
>> @@ -205,6 +206,15 @@ properties:
>>             - const: s9_p2_backup
>>             - const: s10_p1_backup
>>             - const: s10_p2_backup
>> +      - items:
>> +          - const: mode
>> +          - const: base0
>> +          - const: base1
>> +          - pattern: '^s[0-9]+$'
>> +          - pattern: '^s[0-9]+$'
>> +          - pattern: '^s[0-9]+$'
>> +          - pattern: '^s[0-9]+$'
>> +          - pattern: '^s[0-9]+$'
> Previously there were 17 items here. What changed?
Previously I have added all the available sensor offsets in QFPROM. But 
in IPQ5332,only 5 sensors are present.
Other sensors not present/wired in the SoC, hence updated only for 5 
sensors now.

--
Thanks,
Praveenkumar
>
> Best regards,
> Krzysztof
>