Re: [PATCH v2] phy: ti: phy-j721e-wiz: fix usxgmii configuration

[Roger Quadros <rogerq@kernel.org>]

Hi Siddharth,

On 30/09/2024 12:57, Siddharth Vadapalli wrote:
> Commit b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in
> wiz driver") added support for USXGMII mode. In doing so, P0_REFCLK_SEL
> was set to "pcs_mac_clk_divx1_ln_0" (0x3) and P0_STANDARD_MODE was set to
> LANE_MODE_GEN1, which results in a data rate of 5.15625 Gbps. However,
> since the USXGMII mode can support up to 10.3125 Gbps data rate, the
> aforementioned fields should be set to "pcs_mac_clk_divx0_ln_0" (0x2) and
> LANE_MODE_GEN2 respectively. Fix the configuration accordingly to truly
> support USXGMII up to 10G.
> 
> Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> 
> Hello,
> 
> This patch is based on commit
> 9852d85ec9d4 Linux 6.12-rc1
> of mainline Linux.
> 
> v1:
> https://lore.kernel.org/r/20240910091714.1082191-1-s-vadapalli@ti.com/
> Changes since v1:
> - Rebased to Linux 6.12-rc1.
> 
> Regards,
> Siddharth.
> 
>  drivers/phy/ti/phy-j721e-wiz.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index a6c0c5607ffd..c6e846d385d2 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -450,8 +450,8 @@ static int wiz_mode_select(struct wiz *wiz)
>  		} else if (wiz->lane_phy_type[i] == PHY_TYPE_USXGMII) {
>  			ret = regmap_field_write(wiz->p0_mac_src_sel[i], 0x3);
>  			ret = regmap_field_write(wiz->p0_rxfclk_sel[i], 0x3);

I'm not sure. Don't we have to change rxfclk as well?

> -			ret = regmap_field_write(wiz->p0_refclk_sel[i], 0x3);
> -			mode = LANE_MODE_GEN1;
> +			ret = regmap_field_write(wiz->p0_refclk_sel[i], 0x2);
> +			mode = LANE_MODE_GEN2;
>  		} else {
>  			continue;
>  		}

-- 
cheers,
-roger