Re: [PATCH v3 0/3] Add support for the S6E3HF2 panel on TM2e board

[Hoegeun Kwon <hoegeun.kwon@samsung.com>]

Dear Thierry,

Could you check these patches?
I think this patches have accumulated enough dust.
If you have a another opinion, please tell me.

Best regards,
Hoegeun

On 04/18/2017 05:40 PM, Hoegeun Kwon wrote:
> Hi all,
>
> The purpose of this patch is add support for s6e3hf2 AMOLED panel on
> the TM2e board. The panel has 1600x2560 resolution in 5.65" physical
> panel in the TM2e device.
>
> The s6e3hf2 panel(5.65") is simliar to the previous s6e3ha2 panel(5.7"),
> but resolution and some command message are different. So it can be
> distinguished as a compatiblitiy string.
>
> Best regards,
> Hoegeun
>
> Changes for V3:
> - Remove te-gpios property in dts.
> - Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> on all patches.
> - Added Reviewed-by: Inki Dae <inki.dae@samsung.com> on patch (2/3).
>
> Changes for V2:
> - Add new compatible string to "samsung,s6e3ha2.txt binding with comments.
> - Fix the panel name from s6e3ha2-e to s6e3hf2
>
> Hoegeun Kwon (3):
>    dt-bindings: Add support for samsung s6e3hf2 panel
>    drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board
>    arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
>
>   .../bindings/display/panel/samsung,s6e3ha2.txt     |  5 +-
>   arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts     | 11 ++++
>   drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 64 +++++++++++++++++++---
>   3 files changed, 72 insertions(+), 8 deletions(-)
>