Re: [net-next PATCH v6 3/6] octeontx2-pf: AF_XDP zero copy receive support

[Kees Bakker <kees@ijzerbout.nl>]

Op 13-02-2025 om 06:31 schreef Suman Ghosh:
> This patch adds support to AF_XDP zero copy for CN10K.
> This patch specifically adds receive side support. In this approach once
> a xdp program with zero copy support on a specific rx queue is enabled,
> then that receive quse is disabled/detached from the existing kernel
> queue and re-assigned to the umem memory.
>
> Signed-off-by: Suman Ghosh <sumang@marvell.com>
> ---
>   .../ethernet/marvell/octeontx2/nic/Makefile   |   2 +-
>   .../ethernet/marvell/octeontx2/nic/cn10k.c    |   7 +-
>   .../marvell/octeontx2/nic/otx2_common.c       | 114 ++++++++---
>   .../marvell/octeontx2/nic/otx2_common.h       |   6 +-
>   .../ethernet/marvell/octeontx2/nic/otx2_pf.c  |  25 ++-
>   .../marvell/octeontx2/nic/otx2_txrx.c         |  73 +++++--
>   .../marvell/octeontx2/nic/otx2_txrx.h         |   6 +
>   .../ethernet/marvell/octeontx2/nic/otx2_vf.c  |  12 +-
>   .../ethernet/marvell/octeontx2/nic/otx2_xsk.c | 182 ++++++++++++++++++
>   .../ethernet/marvell/octeontx2/nic/otx2_xsk.h |  21 ++
>   .../ethernet/marvell/octeontx2/nic/qos_sq.c   |   2 +-
>   11 files changed, 389 insertions(+), 61 deletions(-)
>   create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_xsk.c
>   create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_xsk.h
>
>
> [...]
> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_xsk.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_xsk.c
> new file mode 100644
> index 000000000000..894c1e0aea6f
> --- /dev/null
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_xsk.c
>
> [...]
> +static void otx2_clean_up_rq(struct otx2_nic *pfvf, int qidx)
> +{
> +	struct otx2_qset *qset = &pfvf->qset;
> +	struct otx2_cq_queue *cq;
> +	struct otx2_pool *pool;
> +	u64 iova;
> +
> +	/* If the DOWN flag is set SQs are already freed */
> +	if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
> +		return;
> +
> +	cq = &qset->cq[qidx];
> +	if (cq)
> +		otx2_cleanup_rx_cqes(pfvf, cq, qidx);
The if check makes no sense, cq is always != NULL
> +
> [...]
> +int otx2_xsk_wakeup(struct net_device *dev, u32 queue_id, u32 flags)
> +{
> +	struct otx2_nic *pf = netdev_priv(dev);
> +	struct otx2_cq_poll *cq_poll = NULL;
> +	struct otx2_qset *qset = &pf->qset;
> +
> +	if (pf->flags & OTX2_FLAG_INTF_DOWN)
> +		return -ENETDOWN;
> +
> +	if (queue_id >= pf->hw.rx_queues)
> +		return -EINVAL;
> +
> +	cq_poll = &qset->napi[queue_id];
> +	if (!cq_poll)
> +		return -EINVAL;
cq_poll can never be NULL.
> [...]
>