Re: [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\

[Aswath Govindraju <a-govindraju@ti.com>]

Hi Rob,

On 18/08/21 1:16 am, Rob Herring wrote:
> On Tue, Aug 10, 2021 at 12:18:59PM +0530, Aswath Govindraju wrote:
>> Convert eeprom-93xx46 binding documentation from txt to yaml format
> 
> Drop the trailing '\' in the subject.
> 
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
>> ---
>>
>> Device tree fixes required are posted in the following patch,
>> https://lore.kernel.org/patchwork/project/lkml/list/?series=511477
>>

Thank you for review comments. I have made the required corrections and
posted v2[1] for this patch.

[1] - https://lore.kernel.org/patchwork/project/lkml/list/?series=512773

Thanks,
Aswath

>>
>>  .../bindings/misc/eeprom-93xx46.txt           | 29 --------
>>  .../bindings/misc/eeprom-93xx46.yaml          | 72 +++++++++++++++++++
>>  2 files changed, 72 insertions(+), 29 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>>  create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>> deleted file mode 100644
>> index 72ea0af368d4..000000000000
>> --- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>> +++ /dev/null
>> @@ -1,29 +0,0 @@
>> -EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
>> -
>> -Required properties:
>> -- compatible : shall be one of:
>> -    "atmel,at93c46"
>> -    "atmel,at93c46d"
>> -    "atmel,at93c56"
>> -    "atmel,at93c66"
>> -    "eeprom-93xx46"
>> -    "microchip,93lc46b"
>> -- data-size : number of data bits per word (either 8 or 16)
>> -
>> -Optional properties:
>> -- read-only : parameter-less property which disables writes to the EEPROM
>> -- select-gpios : if present, specifies the GPIO that will be asserted prior to
>> -  each access to the EEPROM (e.g. for SPI bus multiplexing)
>> -
>> -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
>> -apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
>> -
>> -Example:
>> -	eeprom@0 {
>> -		compatible = "eeprom-93xx46";
>> -		reg = <0>;
>> -		spi-max-frequency = <1000000>;
>> -		spi-cs-high;
>> -		data-size = <8>;
>> -		select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
>> -	};
>> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>> new file mode 100644
>> index 000000000000..4254a7be5a70
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
>> +
>> +maintainers:
>> +  - Cory Tusar <cory.tusar@pid1solutions.com>
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: "@[0-9]+$"
> 
> Unless you want to define 'eeprom' as the correct node name, there's no 
> point in this. The unit address is checked by the spi bus schema and 
> it's also wrong here being decimal.
> 
>> +
>> +  compatible:
>> +    enum:
>> +      - atmel,at93c46
>> +      - atmel,at93c46d
>> +      - atmel,at93c56
>> +      - atmel,at93c66
>> +      - eeprom-93xx46
>> +      - microchip,93lc46b
>> +
>> +  data-size:
>> +    description: number of data bits per word
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    enum: [8, 16]
>> +
>> +  reg:
>> +    description: chip select of EEPROM
>> +    maxItems: 1
>> +
>> +  spi-max-frequency: true
>> +  spi-cs-high: true
>> +
>> +  read-only:
>> +    description:
>> +      parameter-less property which disables writes to the EEPROM
> 
> type: boolean.
> 
> 
>> +
>> +  select-gpios:
>> +    description:
>> +      specifies the GPIO that needs to be asserted prior to each access
>> +      of EEPROM (e.g. for SPI bus multiplexing)
>> +    maxItems: 1
>> +
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - data-size
>> +  - spi-max-frequency
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    spi0 {
> 
> spi {
> 
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      eeprom@0 {
>> +        compatible = "eeprom-93xx46";
>> +        reg = <0>;
>> +        spi-max-frequency = <1000000>;
>> +        spi-cs-high;
>> +        data-size = <8>;
>> +        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
>> +      };
>> +    };
>> -- 
>> 2.17.1
>>
>>