From: "Kumar, Udit" <u-kumar1@ti.com>
To: Gokul Praveen <g-praveen@ti.com>, <j-keerthy@ti.com>,
<ukleinek@kernel.org>, <linux-pwm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <n-francis@ti.com>
Subject: Re: [PATCH] pwm: tiehrpwm: Enable EHRPWM controller before setting configuration
Date: Tue, 6 Jan 2026 18:57:11 +0530 [thread overview]
Message-ID: <4dd61e57-bc6a-485d-847d-8a86b854d358@ti.com> (raw)
In-Reply-To: <20260106105411.36033-1-g-praveen@ti.com>
On 1/6/2026 4:24 PM, Gokul Praveen wrote:
> The period and duty cycle configurations does not get reflected
> after setting them using sysfs nodes. This is because at the
> end of ehrpwm_pwm_config function, the put_sync function is
> called which resets the hardware.
>
> Fix it by preventing the pwm controller from going into
> low-power mode.
>
> 'Fixes: 5f027d9b83db("pwm: tiehrpwm: Implement
> .apply() callback")'
>
> Signed-off-by: Gokul Praveen <g-praveen@ti.com>
No new line, between Fixes and Signed-off-by Please ,
You can drop ' before fixes.
rest LGTM.
> ---
> drivers/pwm/pwm-tiehrpwm.c | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
> index 7a86cb090f76..408aed70be8c 100644
> --- a/drivers/pwm/pwm-tiehrpwm.c
> +++ b/drivers/pwm/pwm-tiehrpwm.c
> @@ -237,7 +237,6 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> if (period_cycles < 1)
> period_cycles = 1;
>
> - pm_runtime_get_sync(pwmchip_parent(chip));
>
> /* Update clock prescaler values */
> ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
> @@ -290,12 +289,11 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> if (!(duty_cycles > period_cycles))
> ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
>
> - pm_runtime_put_sync(pwmchip_parent(chip));
> -
> return 0;
> }
>
> -static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> +static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
> + const struct pwm_state *state)
> {
> struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
> u16 aqcsfrc_val, aqcsfrc_mask;
> @@ -304,6 +302,13 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> /* Leave clock enabled on enabling PWM */
> pm_runtime_get_sync(pwmchip_parent(chip));
>
> + ret = ehrpwm_pwm_config(chip, pwm, state->duty_cycle, state->period, state->polarity);
> +
> + if (ret) {
> + pm_runtime_put_sync(pwmchip_parent(chip));
> + return ret;
> + }
> +
> /* Disabling Action Qualifier on PWM output */
> if (pwm->hwpwm) {
> aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
> @@ -391,12 +396,11 @@ static int ehrpwm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> return 0;
> }
>
> - err = ehrpwm_pwm_config(chip, pwm, state->duty_cycle, state->period, state->polarity);
> - if (err)
> - return err;
> -
> if (!enabled)
> - err = ehrpwm_pwm_enable(chip, pwm);
> + err = ehrpwm_pwm_enable(chip, pwm, state);
> + else
> + err = ehrpwm_pwm_config(chip, pwm, state->duty_cycle,
> + state->period, state->polarity);
>
> return err;
> }
next prev parent reply other threads:[~2026-01-06 13:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 10:54 Gokul Praveen
2026-01-06 13:27 ` Kumar, Udit [this message]
2026-01-07 5:38 ` Gokul Praveen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4dd61e57-bc6a-485d-847d-8a86b854d358@ti.com \
--to=u-kumar1@ti.com \
--cc=g-praveen@ti.com \
--cc=j-keerthy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=n-francis@ti.com \
--cc=ukleinek@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®