From: Harin Lee <me@harin.net>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/6] ALSA: ctxfi: Add support for Onkyo SE-300PCIE
Date: Sat, 22 Nov 2025 18:00:29 +0900 [thread overview]
Message-ID: <4df3c2ac-88cd-42d1-9f1e-c5c2c5a2b00f@harin.net> (raw)
In-Reply-To: <20251121152221.1152523-1-me@harin.net>
I noticed that 'rca_state' in patch 5 uses 'unsigned char'. While it is
safe due to the bounds check, I plan to switch it to 'unsigned int' for
strict correctness.
I also have two questions regarding conventions:
1. ALSA control name (on patch 5): Is "Dedicated Output Playback Enum"
acceptable, or would you prefer a simpler name?
2. CA20K2 port logic (on patch 6): The condition
'if ((idx < 4) && ((hw->model != CTOK0010) || (idx < 3)))' handles
the non-standard RCA port mapping. Does this line require additional
comments or a helper function for better readability?
Please let me know if you would prefer me to send a v3.
On 11/22/25 12:22 AM, Harin Lee wrote:
> I added support for the Onkyo SE-300PCIE (OK0010), a Creative X-Fi
> CA20K2-based sound card with dual TI PCM1798 DACs, a single TI PCM1681
> DAC for 7.1ch output, and a CS5364 ADC. This model differs
> significantly from other CA20K2-based variants.
>
> Since official driver support for this hardware was discontinued a long
> time ago, this patch series enables the card to be used on modern
> platforms.
>
> This patch series was developed using QEMU vfio tracing, and PCIe BAR
> dumps. Tested with analog output (up to 192kHz) and line/microphone
> input (up to 96kHz) at various sample rates.
>
> Changes in v2:
> - Fix coding style issue (mixed declaration and code) in
> dedicated_rca_put().
>
> Harin Lee (6):
> ALSA: ctxfi: Add hw parameter to daio_mgr_dao_init()
> ALSA: ctxfi: Add ADC helper functions for GPIO
> ALSA: ctxfi: Use explicit output flag for DAIO resources
> ALSA: ctxfi: Refactor resource alloc for sparse mappings
> ALSA: ctxfi: Add support for dedicated RCA switching
> ALSA: ctxfi: Add support for Onkyo SE-300PCIE (OK0010)
>
> sound/pci/ctxfi/ctatc.c | 97 ++++++++++++++++++++++++++----------
> sound/pci/ctxfi/ctatc.h | 8 +--
> sound/pci/ctxfi/ctdaio.c | 18 ++++---
> sound/pci/ctxfi/ctdaio.h | 3 ++
> sound/pci/ctxfi/cthardware.h | 4 +-
> sound/pci/ctxfi/cthw20k1.c | 3 +-
> sound/pci/ctxfi/cthw20k2.c | 79 ++++++++++++++++++++++-------
> sound/pci/ctxfi/ctmixer.c | 73 +++++++++++++++++++++++++--
> 8 files changed, 223 insertions(+), 62 deletions(-)
>
next prev parent reply other threads:[~2025-11-22 9:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-21 15:22 Harin Lee
2025-11-21 15:22 ` [PATCH v2 1/6] ALSA: ctxfi: Add hw parameter to daio_mgr_dao_init() Harin Lee
2025-11-21 15:22 ` [PATCH v2 2/6] ALSA: ctxfi: Add ADC helper functions for GPIO Harin Lee
2025-11-21 15:22 ` [PATCH v2 3/6] ALSA: ctxfi: Use explicit output flag for DAIO resources Harin Lee
2025-11-21 15:22 ` [PATCH v2 4/6] ALSA: ctxfi: Refactor resource alloc for sparse mappings Harin Lee
2025-11-21 15:22 ` [PATCH v2 5/6] ALSA: ctxfi: Add support for dedicated RCA switching Harin Lee
2025-11-21 15:22 ` [PATCH v2 6/6] ALSA: ctxfi: Add support for Onkyo SE-300PCIE (OK0010) Harin Lee
2025-11-22 9:00 ` Harin Lee [this message]
2025-11-22 9:29 ` [PATCH v2 0/6] ALSA: ctxfi: Add support for Onkyo SE-300PCIE Takashi Iwai
2025-11-22 11:33 ` Harin Lee
2025-11-24 8:38 ` Takashi Iwai
2025-11-24 10:22 ` Harin Lee
2025-11-24 15:54 ` Takashi Iwai
2025-11-24 16:54 ` Harin Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4df3c2ac-88cd-42d1-9f1e-c5c2c5a2b00f@harin.net \
--to=me@harin.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®