From: Pengjie Zhang <zhangpengjie2@huawei.com>
To: <rafael@kernel.org>, <viresh.kumar@linaro.org>
Cc: <linuxarm@huawei.com>, <zhanjie9@hisilicon.com>,
<prime.zeng@hisilicon.com>, <wanghuiqiang@huawei.com>,
<xuwei5@huawei.com>, <zhenglifeng1@huawei.com>,
<yubowen8@huawei.com>, <pierre.gondois@arm.com>,
<sumitg@nvidia.com>, <linux-pm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <mojunjun4@huawei.com>,
Christian Loehle <christian.loehle@arm.com>
Subject: Re: [PATCH v2] cpufreq: CPPC: Enable boost by default when supported
Date: Mon, 26 Oct 2026 16:47:01 +0800 [thread overview]
Message-ID: <4df4a309-ffd5-4f46-856e-6ba21a614d72@huawei.com> (raw)
In-Reply-To: <20261022075901.3436021-1-zhangpengjie2@huawei.com>
+cc Christian Loehle
On 10/22/2026 3:59 PM, Pengjie Zhang wrote:
> The CPPC driver leaves boost disabled by default when Highest Performance
> exceeds Nominal Performance. Userspace must explicitly enable boost
> before governors can use the full advertised performance range.
>
> Enable boost by default when at least one possible CPU reports support,
> while users who prefer to stay within the sustained nominal limit can
> still disable it via the boost knob without determining scaling_max_freq
> for each policy.
>
> Check the performance capabilities before registering the driver so that
> the cpufreq core enables boost for each policy that supports it.
>
> Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
> ---
> Changes in v2:
> - Drop "even" and clarify the commit message (Christian).
> - Link to v1: https://lore.kernel.org/all/20261015015812.867988-1-zhangpengjie2@huawei.com/
>
> drivers/cpufreq/cppc_cpufreq.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> index 80893844353c..0a4255a36f60 100644
> --- a/drivers/cpufreq/cppc_cpufreq.c
> +++ b/drivers/cpufreq/cppc_cpufreq.c
> @@ -1052,6 +1052,25 @@ static struct cpufreq_driver cppc_cpufreq_driver = {
> .name = "cppc_cpufreq",
> };
>
> +static void __init cppc_cpufreq_default_boost_init(void)
> +{
> + struct cppc_perf_caps caps;
> + bool enable = false;
> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + if (cppc_get_perf_caps(cpu, &caps))
> + continue;
> +
> + if (caps.highest_perf > caps.nominal_perf) {
> + enable = true;
> + break;
> + }
> + }
> +
> + cppc_cpufreq_driver.boost_enabled = enable;
> +}
> +
> static int __init cppc_cpufreq_init(void)
> {
> int ret;
> @@ -1061,6 +1080,7 @@ static int __init cppc_cpufreq_init(void)
>
> cppc_freq_invariance_init();
> populate_efficiency_class();
> + cppc_cpufreq_default_boost_init();
>
> ret = cpufreq_register_driver(&cppc_cpufreq_driver);
> if (ret)
prev parent reply other threads:[~2026-10-26 8:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-22 7:59 Pengjie Zhang
2026-10-26 8:47 ` Pengjie Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4df4a309-ffd5-4f46-856e-6ba21a614d72@huawei.com \
--to=zhangpengjie2@huawei.com \
--cc=christian.loehle@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mojunjun4@huawei.com \
--cc=pierre.gondois@arm.com \
--cc=prime.zeng@hisilicon.com \
--cc=rafael@kernel.org \
--cc=sumitg@nvidia.com \
--cc=viresh.kumar@linaro.org \
--cc=wanghuiqiang@huawei.com \
--cc=xuwei5@huawei.com \
--cc=yubowen8@huawei.com \
--cc=zhanjie9@hisilicon.com \
--cc=zhenglifeng1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®