Re: [PATCH 0/4] net: qrtr: Add support for using identical MHI endpoint devices

[Jeff Johnson <jeff.johnson@oss.qualcomm.com>]

On 9/18/2026 9:28 AM, Manivannan Sadhasivam via B4 Relay wrote:
> Hi,
> 
> This series reworks the QRTR driver to add support for using identical MHI
> endpoint devices at the same time. Currently, QRTR driver has a limitation on
> using more than one identical MHI endpoint devices like QCS6490 or any Qcom
> Endpoint device making use of QRTR at the same time. Because of the fact that
> these devices will have the identical QRTR node id, they cannot be used at the
> same time, on the same host machine.
> 
> This limitation is a blocker for running upstream kernel on devices like Qcom
> based routers as they often have multiple identical WLAN Endpoint devices
> connected to the Router SoC.
> 
> This series supersedes the following 2 series from Juha:
> https://lore.kernel.org/all/20260915054207.2513877-1-juha-matti.tilli@iki.fi
> https://lore.kernel.org/all/20260915074135.2567411-1-juha-matti.tilli@iki.fi
> 
> Compared to the series from Juha, this series simplifies the multi-endpoint
> support by computing a unique node id for each MHI endpoint and uses it for the
> internal QRTR book keeping. This ensures that even if the MHI endpoint devices
> have same node ids, the host QRTR will always use a unique node id for each one
> of them.
> 
> More details can be found in the individual patches.
> 
> Testing
> =======
> 
> Juha tested this series on multi ath11k setup by backporting this series to
> 6.6.156 kernel. I'd appreciate a formal tested-by tag from Juha and other folks
> CCed to this series.
> 
> Merge Strategy
> ==============
> 
> Since both QRTR and ath drivers are falling under the networking tree, the whole
> series can be merged through netdev tree.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
> ---
> Manivannan Sadhasivam (4):
>       net: qrtr: Allow the host QRTR to assign a unique node id
>       net: qrtr: Assign unique node id for MHI endpoints
>       wifi: ath11k: Connect to the QMI server belonging to the device owned by this driver
>       wifi: ath12k: Connect to the QMI server belonging to the device owned by this driver
> 
>  MAINTAINERS                           |  1 +
>  drivers/net/wireless/ath/ath11k/hif.h |  9 ++++++
>  drivers/net/wireless/ath/ath11k/pci.c |  9 ++++++
>  drivers/net/wireless/ath/ath11k/qmi.c | 10 ++++++
>  drivers/net/wireless/ath/ath12k/hif.h |  9 ++++++
>  drivers/net/wireless/ath/ath12k/pci.c |  9 ++++++
>  drivers/net/wireless/ath/ath12k/qmi.c | 11 +++++++
>  include/net/qrtr.h                    | 21 ++++++++++++
>  net/qrtr/af_qrtr.c                    | 61 +++++++++++++++++++++++++++++++----
>  net/qrtr/mhi.c                        |  4 ++-
>  10 files changed, 136 insertions(+), 8 deletions(-)
> ---
> base-commit: cee9395acd8043be0644b25c34bfa86623f2b935

I see this is based upon v7.3-rc1 (current release tree).
This series doesn't cleanly apply on the net-next tree.

Are you planning on netdev taking this through current or next?

And an alternate merge strategy would be for netdev to take the first two
patches and then after wireless fast-forwards and ath fast-forwards, I could
take the last two though the ath tree.