From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Dmitry Osipenko <digetx@gmail.com>,
Joseph Lo <josephl@nvidia.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/3] clocksource/drivers/tegra: Remove duplicated use of per_cpu_ptr
Date: Mon, 10 Jun 2019 10:11:14 +0200 [thread overview]
Message-ID: <4e1f1389-afde-3994-2ccc-4e57e9ad78d1@linaro.org> (raw)
In-Reply-To: <20190609192730.29459-2-digetx@gmail.com>
Hi Dmitry,
On 09/06/2019 21:27, Dmitry Osipenko wrote:
> It was left unnoticed by accident, which means that the code could be
> cleaned up a tad more.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> drivers/clocksource/timer-tegra.c | 40 +++++++++++++++++++------------
> 1 file changed, 25 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/clocksource/timer-tegra.c b/drivers/clocksource/timer-tegra.c
> index 9406855781ff..6da169de47f9 100644
> --- a/drivers/clocksource/timer-tegra.c
> +++ b/drivers/clocksource/timer-tegra.c
> @@ -216,6 +216,19 @@ static inline unsigned int tegra_irq_idx_for_cpu(int cpu, bool tegra20)
> return TIMER10_IRQ_IDX + cpu;
> }
>
> +static inline unsigned long tegra_rate_for_timer(struct timer_of *to,
> + bool tegra20)
> +{
> + /*
> + * TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
> + * parent clock.
> + */
> + if (tegra20)
> + return 1000000;
Mind to take the opportunity to convert the literal value to a constant?
> +
> + return to->of_clk.rate;
> +}
> +
> static int __init tegra_init_timer(struct device_node *np, bool tegra20,
> int rating)
> {
> @@ -268,30 +281,27 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20,
>
> for_each_possible_cpu(cpu) {
> struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
> + unsigned long flags = IRQF_TIMER | IRQF_NOBALANCING;
> + unsigned long rate = tegra_rate_for_timer(&tegra_to, tegra20);
> unsigned int base = tegra_base_for_cpu(cpu, tegra20);
> unsigned int idx = tegra_irq_idx_for_cpu(cpu, tegra20);
> + unsigned int irq = irq_of_parse_and_map(np, idx);
>
> - /*
> - * TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
> - * parent clock.
> - */
> - if (tegra20)
> - cpu_to->of_clk.rate = 1000000;
> -
> - cpu_to = per_cpu_ptr(&tegra_to, cpu);
> - cpu_to->of_base.base = timer_reg_base + base;
> - cpu_to->clkevt.rating = rating;
> - cpu_to->clkevt.cpumask = cpumask_of(cpu);
> - cpu_to->clkevt.irq = irq_of_parse_and_map(np, idx);
> - if (!cpu_to->clkevt.irq) {
> + if (!irq) {
> pr_err("failed to map irq for cpu%d\n", cpu);
> ret = -EINVAL;
> goto out_irq;
> }
>
> + cpu_to->clkevt.irq = irq;
> + cpu_to->clkevt.rating = rating;
> + cpu_to->clkevt.cpumask = cpumask_of(cpu);
> + cpu_to->of_base.base = timer_reg_base + base;
> + cpu_to->of_clk.rate = rate;
> +
> irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
> - ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr,
> - IRQF_TIMER | IRQF_NOBALANCING,
> +
> + ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr, flags,
> cpu_to->clkevt.name, &cpu_to->clkevt);
> if (ret) {
> pr_err("failed to set up irq for cpu%d: %d\n",
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2019-06-10 8:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 19:27 [PATCH v1 0/3] Few more cleanups for tegra-timer Dmitry Osipenko
2019-06-09 19:27 ` [PATCH v1 1/3] clocksource/drivers/tegra: Remove duplicated use of per_cpu_ptr Dmitry Osipenko
2019-06-10 8:11 ` Daniel Lezcano [this message]
2019-06-10 10:39 ` Dmitry Osipenko
2019-06-09 19:27 ` [PATCH v1 2/3] clocksource/drivers/tegra: Set and use timer's period Dmitry Osipenko
2019-06-09 19:27 ` [PATCH v1 3/3] clocksource/drivers/tegra: Drop unneeded typecasting in one place Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4e1f1389-afde-3994-2ccc-4e57e9ad78d1@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®