mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "David E. Box" <david.e.box@linux.intel.com>,
	irenic.rajneesh@gmail.com, mgross@linux.intel.com,
	gayatri.kammela@intel.com
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/9] platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
Date: Wed, 7 Apr 2021 16:23:07 +0200	[thread overview]
Message-ID: <4e374b74-3587-b5d8-2c5c-a8ab184d8858@redhat.com> (raw)
In-Reply-To: <20210401030558.2301621-2-david.e.box@linux.intel.com>

Hi,

On 4/1/21 5:05 AM, David E. Box wrote:
> The DMI callbacks, used for quirks, currently access the PMC by getting
> the address a global pmc_dev struct. Instead, have the callbacks set a
> global quirk specific variable. In probe, after calling dmi_check_system(),
> pass pmc_dev to a function that will handle each quirk if its variable
> condition is met. This allows removing the global pmc_dev later.
> 
> Signed-off-by: David E. Box <david.e.box@linux.intel.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> ---
>  drivers/platform/x86/intel_pmc_core.c | 19 ++++++++++++++++---
>  1 file changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
> index b5888aeb4bcf..260d49dca1ad 100644
> --- a/drivers/platform/x86/intel_pmc_core.c
> +++ b/drivers/platform/x86/intel_pmc_core.c
> @@ -1186,9 +1186,15 @@ static const struct pci_device_id pmc_pci_ids[] = {
>   * the platform BIOS enforces 24Mhz crystal to shutdown
>   * before PMC can assert SLP_S0#.
>   */
> +static bool xtal_ignore;
>  static int quirk_xtal_ignore(const struct dmi_system_id *id)
>  {
> -	struct pmc_dev *pmcdev = &pmc;
> +	xtal_ignore = true;
> +	return 0;
> +}
> +
> +static void pmc_core_xtal_ignore(struct pmc_dev *pmcdev)
> +{
>  	u32 value;
>  
>  	value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_vric1_offset);
> @@ -1197,7 +1203,6 @@ static int quirk_xtal_ignore(const struct dmi_system_id *id)
>  	/* Low Voltage Mode Enable */
>  	value &= ~SPT_PMC_VRIC1_SLPS0LVEN;
>  	pmc_core_reg_write(pmcdev, pmcdev->map->pm_vric1_offset, value);
> -	return 0;
>  }
>  
>  static const struct dmi_system_id pmc_core_dmi_table[]  = {
> @@ -1212,6 +1217,14 @@ static const struct dmi_system_id pmc_core_dmi_table[]  = {
>  	{}
>  };
>  
> +static void pmc_core_do_dmi_quirks(struct pmc_dev *pmcdev)
> +{
> +	dmi_check_system(pmc_core_dmi_table);
> +
> +	if (xtal_ignore)
> +		pmc_core_xtal_ignore(pmcdev);
> +}
> +
>  static int pmc_core_probe(struct platform_device *pdev)
>  {
>  	static bool device_initialized;
> @@ -1253,7 +1266,7 @@ static int pmc_core_probe(struct platform_device *pdev)
>  	mutex_init(&pmcdev->lock);
>  	platform_set_drvdata(pdev, pmcdev);
>  	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
> -	dmi_check_system(pmc_core_dmi_table);
> +	pmc_core_do_dmi_quirks(pmcdev);
>  
>  	/*
>  	 * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
> 


  reply	other threads:[~2021-04-07 14:23 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-01  3:05 [PATCH 0/9] intel_pmc_core: Add sub-state requirements and mode latching support David E. Box
2021-04-01  3:05 ` [PATCH 1/9] platform/x86: intel_pmc_core: Don't use global pmcdev in quirks David E. Box
2021-04-07 14:23   ` Hans de Goede [this message]
2021-04-07 14:58   ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 2/9] platform/x86: intel_pmc_core: Remove global struct pmc_dev David E. Box
2021-04-07 14:23   ` Hans de Goede
2021-04-07 15:02   ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 3/9] platform/x86: intel_pmc_core: Handle sub-states generically David E. Box
2021-04-07 14:23   ` Hans de Goede
2021-04-07 15:22   ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 4/9] platform/x86: intel_pmc_core: Show LPM residency in microseconds David E. Box
2021-04-07 14:23   ` Hans de Goede
2021-04-07 15:24   ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 5/9] platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake David E. Box
2021-04-07 14:27   ` Hans de Goede
2021-04-07 15:38   ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 6/9] platform/x86: intel_pmc_core: Add requirements file to debugfs David E. Box
2021-04-07 14:28   ` Hans de Goede
2021-04-07 15:45   ` Rajneesh Bhardwaj
2021-04-07 17:47     ` David E. Box
2021-04-01  3:05 ` [PATCH 7/9] platform/x86: intel_pmc_core: Add option to set/clear LPM mode David E. Box
2021-04-07 14:37   ` Hans de Goede
2021-04-07 17:19     ` David E. Box
2021-04-01  3:05 ` [PATCH 8/9] platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake David E. Box
2021-04-07 14:48   ` Hans de Goede
2021-04-07 15:48   ` Rajneesh Bhardwaj
2021-04-07 15:50     ` Rajneesh Bhardwaj
2021-04-01  3:05 ` [PATCH 9/9] platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P David E. Box
2021-04-07 14:48   ` Hans de Goede
2021-04-07 15:49   ` Rajneesh Bhardwaj
2021-04-07 14:49 ` [PATCH 0/9] intel_pmc_core: Add sub-state requirements and mode latching support Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4e374b74-3587-b5d8-2c5c-a8ab184d8858@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=david.e.box@linux.intel.com \
    --cc=gayatri.kammela@intel.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mgross@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®