From: Mark Burton <mark@helenandmark.org>
To: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: linux-kernel@vger.kernel.org
Subject: Re: tx queue start entry x dirty entry y (was 8139too PCI IRQ issues)
Date: Mon, 25 Jul 2005 08:30:34 +0200 [thread overview]
Message-ID: <4e427d7187338fdc6012b8ae6a458040@helenandmark.org> (raw)
In-Reply-To: <877jfhnxrp.fsf@devron.myhome.or.jp>
[I'm currently having nasty ISP problems, so I've removed myself from
the list for the time-being, as e-mail is struggling to get through to
me -- hence the delay in my reply to this, SORRY]
>
> Probably it's the miss config of PIC. Can you post more info?
Thanks for helping! :-)))
>
> - /proc/interrupt
more /proc/interrupts
CPU0
0: 473349 IO-APIC-edge timer
1: 10 IO-APIC-edge i8042
2: 0 XT-PIC cascade
5: 1 IO-APIC-edge soundblaster
7: 2 IO-APIC-edge parport0
9: 8152 IO-APIC-edge aic7xxx
10: 19988 IO-APIC-edge eth0
11: 577 IO-APIC-edge ohci_hcd, ohci_hcd, ohci_hcd,
ohci_hcd, eth1
12: 101 IO-APIC-edge i8042
14: 51421 IO-APIC-edge ide0
NMI: 0
LOC: 473350
ERR: 0
MIS: 0
> - mptable
I'm running a single (old) processor, and I dont have mptable
installed.... I can't even find a package for it, am I missing
something? Sorry!
> - 8259A.pl
perl 8259A.pl
irq 0: 00, edge
irq 1: 00, edge
irq 2: 00, edge
irq 3: 00, edge
irq 4: 00, edge
irq 5: 00, edge
irq 6: 00, edge
irq 7: 00, edge
irq 8: 0a, edge
irq 9: 0a, level
irq 10: 0a, edge
irq 11: 0a, level
irq 12: 0a, edge
irq 13: 0a, edge
irq 14: 0a, edge
irq 15: 0a, edge
> - lspci -vvv
0000:00:00.0 Non-VGA unclassified device: Intel Corp. 82378ZB/IB,
82379AB (SIO, SIO.A) PCI to ISA Bridge (rev 88)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.0 IDE interface: Silicon Image, Inc. (formerly CMD
Technology Inc) PCI0646 (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at fc00 [size=16]
0000:00:02.0 SCSI storage controller: Adaptec AIC-7880U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (2000ns min, 2000ns max), Cache Line Size: 0x08
(32 bytes)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at ffbfc000 (32-bit, non-prefetchable)
[size=4K]
0000:00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 01) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a0000000 (32-bit, non-prefetchable)
[size=16K]
Region 1: Memory at a0800000 (32-bit, prefetchable) [size=8M]
Expansion ROM at d0000000 [disabled] [size=64K]
0000:00:0d.0 USB Controller: Lucent Microelectronics USS-344S USB
Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Lucent Microelectronics USS-344S USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffbec000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.1 USB Controller: Lucent Microelectronics USS-344S USB
Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Lucent Microelectronics USS-344S USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffbdc000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.2 USB Controller: Lucent Microelectronics USS-344S USB
Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Lucent Microelectronics USS-344S USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffbcc000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.3 USB Controller: Lucent Microelectronics USS-344S USB
Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Lucent Microelectronics USS-344S USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffbbc000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f400 [size=256]
Region 1: Memory at ffbac000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:14.0 RAM memory: Intel Corp. 450KX/GX [Orion] - 82453KX/GX
Memory controller (rev 04)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI
bridge (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
> --
On 23 Jul 2005, at 21:11, OGAWA Hirofumi wrote:
> Mark Burton <mark@helenandmark.org> writes:
>
>> Hi,
>> I'm getting similar results to Nick Warne, in that when my ethernet is
>> stressed at all (for instance by NFS), I end up with
>> nfs: server..... not responding, still trying
>> nfs: server .... OK
>>
>> With a realtec card, I get errors in /var/spool/messages along the
>> lines of:
>> Jul 3 14:31:13 localhost kernel: eth1: Transmit timeout, status 0c
>> 0005 c07f media 00.
>> Jul 3 14:31:13 localhost kernel: eth1: Tx queue start entry 1160
>> dirty entry 1156.
>> Jul 3 14:31:13 localhost kernel: eth1: Tx descriptor 0 is
>> 0008a03c. (queue head)
> OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
next prev parent reply other threads:[~2005-07-25 6:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-19 16:00 Mark Burton
2005-07-23 19:11 ` OGAWA Hirofumi
2005-07-25 6:30 ` Mark Burton [this message]
2005-07-28 12:06 ` Mark Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4e427d7187338fdc6012b8ae6a458040@helenandmark.org \
--to=mark@helenandmark.org \
--cc=hirofumi@mail.parknet.co.jp \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®